[PATCH v2] media: ov2680: Clear the 'ret' variable on success

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <festevam@denx.de>

Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint
property verification") even when the correct 'link-frequencies'
property is passed in the devicetree, the driver fails to probe:

ov2680 1-0036: probe with driver ov2680 failed with error -22

The reason is that the variable 'ret' may contain the -EINVAL value
from a previous assignment:

ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
			       &rate);

Fix the problem by clearing 'ret' on the successful path.

Tested on imx7s-warp board with the following devicetree:

port {
	ov2680_to_mipi: endpoint {
		remote-endpoint = <&mipi_from_sensor>;
		clock-lanes = <0>;
		data-lanes = <1>;
		link-frequencies = /bits/ 64 <330000000>;
	};
};

Cc: stable@vger.kernel.org
Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v1:
- Use Hans' suggestion to clear 'ret'.

 drivers/media/i2c/ov2680.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index 39d321e2b7f9..3e3b7c2b492c 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -1135,6 +1135,7 @@ static int ov2680_parse_dt(struct ov2680_dev *sensor)
 		goto out_free_bus_cfg;
 	}
 
+	ret = 0;
 out_free_bus_cfg:
 	v4l2_fwnode_endpoint_free(&bus_cfg);
 	return ret;
-- 
2.34.1