From: Renze Nicolai <renze@rnplus.nl>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
arnd@arndb.de, olof@lixom.net, soc@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
joel@jms.id.au, andrew@aj.id.au, renze@rnplus.nl
Subject: [PATCH 1/3] ARM: dts: Modify GPIO table for Asrock X570D4U BMC
Date: Fri, 29 Mar 2024 14:01:39 +0100 [thread overview]
Message-ID: <20240329130152.878944-2-renze@rnplus.nl> (raw)
In-Reply-To: <20240329130152.878944-1-renze@rnplus.nl>
This commit removes button-nmi-n, this board does not have support for an NMI button.
Input status-locatorled-n has been renamed to input-locatorled-n to better indicate the signal type.
The suffix -n has been appended to the name of control-locatorbutton, button-power, control-power, button-reset, control-reset, input-id0, input-id1, input-id2, output-bmc-ready to reflect the inverted signal polarity.
GPIO output-rtc-battery-voltage-read-enable has been renamed to output-hwm-vbat-enable, input-alert1-n to input-aux-smb-alert-n, input-alert3-n to input-psu-smb-alert-n, input-mfg to input-mfg-mode-n and input-caseopen to input-case-open-n.
And GPIOs input-bmc-smb-present-n, input-pcie-wake-n, input-sleep-s3-n, input-sleep-s5-n and input-power-good have been added.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 116 +++++++++---------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 3c975bc41ae7..34bc382bf492 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -79,64 +79,64 @@ iio-hwmon {
&gpio {
status = "okay";
gpio-line-names =
- /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
- /*A4-A7*/ "", "", "", "",
- /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
- /*B4-B7*/ "", "", "", "",
- /*C0-C3*/ "", "", "", "",
- /*C4-C7*/ "", "", "control-locatorbutton", "",
- /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
- /*D4-D7*/ "", "", "", "",
- /*E0-E3*/ "", "", "", "",
- /*E4-E7*/ "", "", "", "",
- /*F0-F3*/ "", "", "", "",
- /*F4-F7*/ "", "", "", "",
- /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
- /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
- /*H0-H3*/ "", "", "", "",
- /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
- /*I0-I3*/ "", "", "", "",
- /*I4-I7*/ "", "", "", "",
- /*J0-J3*/ "output-bmc-ready", "", "", "",
- /*J4-J7*/ "", "", "", "",
- /*K0-K3*/ "", "", "", "",
- /*K4-K7*/ "", "", "", "",
- /*L0-L3*/ "", "", "", "",
- /*L4-L7*/ "", "", "", "",
- /*M0-M3*/ "", "", "", "",
- /*M4-M7*/ "", "", "", "",
- /*N0-N3*/ "", "", "", "",
- /*N4-N7*/ "", "", "", "",
- /*O0-O3*/ "", "", "", "",
- /*O4-O7*/ "", "", "", "",
- /*P0-P3*/ "", "", "", "",
- /*P4-P7*/ "", "", "", "",
- /*Q0-Q3*/ "", "", "", "",
- /*Q4-Q7*/ "", "", "", "",
- /*R0-R3*/ "", "", "", "",
- /*R4-R7*/ "", "", "", "",
- /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
- /*S4-S7*/ "", "", "", "",
- /*T0-T3*/ "", "", "", "",
- /*T4-T7*/ "", "", "", "",
- /*U0-U3*/ "", "", "", "",
- /*U4-U7*/ "", "", "", "",
- /*V0-V3*/ "", "", "", "",
- /*V4-V7*/ "", "", "", "",
- /*W0-W3*/ "", "", "", "",
- /*W4-W7*/ "", "", "", "",
- /*X0-X3*/ "", "", "", "",
- /*X4-X7*/ "", "", "", "",
- /*Y0-Y3*/ "", "", "", "",
- /*Y4-Y7*/ "", "", "", "",
- /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
- /*Z4-Z7*/ "", "", "", "",
- /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
- /*AA4-AC7*/ "", "", "", "",
- /*AB0-AB3*/ "", "", "", "",
- /*AB4-AC7*/ "", "", "", "",
- /*AC0-AC3*/ "", "", "", "",
- /*AC4-AC7*/ "", "", "", "";
+ /*A0-A3*/ "input-locatorled-n", "", "", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton-n", "",
+ /*D0-D3*/ "button-power-n", "control-power-n", "button-reset-n", "control-reset-n",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n", "input-id2-n",
+ /*G4-G7*/ "input-aux-smb-alert-n", "", "input-psu-smb-alert-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg-mode-n", "", "led-heartbeat-n", "input-case-open-n",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready-n", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "input-bmc-smb-present-n", "", "", "input-pcie-wake-n",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "input-sleep-s3-n", "input-sleep-s5-n", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "input-power-good", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
};
&fmc {
--
2.44.0
WARNING: multiple messages have this Message-ID (diff)
From: Renze Nicolai <renze@rnplus.nl>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
arnd@arndb.de, olof@lixom.net, soc@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
joel@jms.id.au, andrew@aj.id.au, renze@rnplus.nl
Subject: [PATCH 1/3] ARM: dts: Modify GPIO table for Asrock X570D4U BMC
Date: Fri, 29 Mar 2024 14:01:39 +0100 [thread overview]
Message-ID: <20240329130152.878944-2-renze@rnplus.nl> (raw)
In-Reply-To: <20240329130152.878944-1-renze@rnplus.nl>
This commit removes button-nmi-n, this board does not have support for an NMI button.
Input status-locatorled-n has been renamed to input-locatorled-n to better indicate the signal type.
The suffix -n has been appended to the name of control-locatorbutton, button-power, control-power, button-reset, control-reset, input-id0, input-id1, input-id2, output-bmc-ready to reflect the inverted signal polarity.
GPIO output-rtc-battery-voltage-read-enable has been renamed to output-hwm-vbat-enable, input-alert1-n to input-aux-smb-alert-n, input-alert3-n to input-psu-smb-alert-n, input-mfg to input-mfg-mode-n and input-caseopen to input-case-open-n.
And GPIOs input-bmc-smb-present-n, input-pcie-wake-n, input-sleep-s3-n, input-sleep-s5-n and input-power-good have been added.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 116 +++++++++---------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 3c975bc41ae7..34bc382bf492 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -79,64 +79,64 @@ iio-hwmon {
&gpio {
status = "okay";
gpio-line-names =
- /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
- /*A4-A7*/ "", "", "", "",
- /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
- /*B4-B7*/ "", "", "", "",
- /*C0-C3*/ "", "", "", "",
- /*C4-C7*/ "", "", "control-locatorbutton", "",
- /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
- /*D4-D7*/ "", "", "", "",
- /*E0-E3*/ "", "", "", "",
- /*E4-E7*/ "", "", "", "",
- /*F0-F3*/ "", "", "", "",
- /*F4-F7*/ "", "", "", "",
- /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
- /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
- /*H0-H3*/ "", "", "", "",
- /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
- /*I0-I3*/ "", "", "", "",
- /*I4-I7*/ "", "", "", "",
- /*J0-J3*/ "output-bmc-ready", "", "", "",
- /*J4-J7*/ "", "", "", "",
- /*K0-K3*/ "", "", "", "",
- /*K4-K7*/ "", "", "", "",
- /*L0-L3*/ "", "", "", "",
- /*L4-L7*/ "", "", "", "",
- /*M0-M3*/ "", "", "", "",
- /*M4-M7*/ "", "", "", "",
- /*N0-N3*/ "", "", "", "",
- /*N4-N7*/ "", "", "", "",
- /*O0-O3*/ "", "", "", "",
- /*O4-O7*/ "", "", "", "",
- /*P0-P3*/ "", "", "", "",
- /*P4-P7*/ "", "", "", "",
- /*Q0-Q3*/ "", "", "", "",
- /*Q4-Q7*/ "", "", "", "",
- /*R0-R3*/ "", "", "", "",
- /*R4-R7*/ "", "", "", "",
- /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
- /*S4-S7*/ "", "", "", "",
- /*T0-T3*/ "", "", "", "",
- /*T4-T7*/ "", "", "", "",
- /*U0-U3*/ "", "", "", "",
- /*U4-U7*/ "", "", "", "",
- /*V0-V3*/ "", "", "", "",
- /*V4-V7*/ "", "", "", "",
- /*W0-W3*/ "", "", "", "",
- /*W4-W7*/ "", "", "", "",
- /*X0-X3*/ "", "", "", "",
- /*X4-X7*/ "", "", "", "",
- /*Y0-Y3*/ "", "", "", "",
- /*Y4-Y7*/ "", "", "", "",
- /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
- /*Z4-Z7*/ "", "", "", "",
- /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
- /*AA4-AC7*/ "", "", "", "",
- /*AB0-AB3*/ "", "", "", "",
- /*AB4-AC7*/ "", "", "", "",
- /*AC0-AC3*/ "", "", "", "",
- /*AC4-AC7*/ "", "", "", "";
+ /*A0-A3*/ "input-locatorled-n", "", "", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton-n", "",
+ /*D0-D3*/ "button-power-n", "control-power-n", "button-reset-n", "control-reset-n",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n", "input-id2-n",
+ /*G4-G7*/ "input-aux-smb-alert-n", "", "input-psu-smb-alert-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg-mode-n", "", "led-heartbeat-n", "input-case-open-n",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready-n", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "input-bmc-smb-present-n", "", "", "input-pcie-wake-n",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "input-sleep-s3-n", "input-sleep-s5-n", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "input-power-good", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
};
&fmc {
--
2.44.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-29 13:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-29 13:01 [PATCH 0/3] ARM: dts: Update devicetree of Asrock X570D4U BMC Renze Nicolai
2024-03-29 13:01 ` Renze Nicolai
2024-03-29 13:01 ` Renze Nicolai [this message]
2024-03-29 13:01 ` [PATCH 1/3] ARM: dts: Modify GPIO table for " Renze Nicolai
2024-04-03 3:21 ` Andrew Jeffery
2024-04-03 3:21 ` Andrew Jeffery
2024-03-29 13:01 ` [PATCH 2/3] ARM: dts: Disable unused ADC channels " Renze Nicolai
2024-03-29 13:01 ` Renze Nicolai
2024-04-03 3:29 ` Andrew Jeffery
2024-04-03 3:29 ` Andrew Jeffery
2024-03-29 13:01 ` [PATCH 3/3] ARM: dts: Modify I2C bus configuration Renze Nicolai
2024-03-29 13:01 ` Renze Nicolai
2024-04-03 3:30 ` Andrew Jeffery
2024-04-03 3:30 ` Andrew Jeffery
2024-04-01 16:36 ` [PATCH 0/3] ARM: dts: Update devicetree of Asrock X570D4U BMC Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240329130152.878944-2-renze@rnplus.nl \
--to=renze@rnplus.nl \
--cc=andrew@aj.id.au \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.