From: Stefan Weil via <qemu-devel@nongnu.org> To: "Alex Bennée" <alex.bennee@linaro.org>, "Philippe Mathieu-Daudé" <philmd@linaro.org>, "Thomas Huth" <thuth@redhat.com>, "Luc Michel" <luc@lmichel.fr>, "Eric Blake" <eblake@redhat.com>, "Paolo Bonzini" <pbonzini@redhat.com> Cc: kvm@vger.kernel.org, qemu-devel@nongnu.org, qemu-trivial@nongnu.org, Stefan Weil <sw@weilnetz.de> Subject: [PATCH for-9.0] Fix some typos in documentation (found by codespell) Date: Sun, 31 Mar 2024 18:15:26 +0200 [thread overview] Message-ID: <20240331161526.1746598-1-sw@weilnetz.de> (raw) Signed-off-by: Stefan Weil <sw@weilnetz.de> --- docs/devel/atomics.rst | 2 +- docs/devel/ci-jobs.rst.inc | 2 +- docs/devel/clocks.rst | 2 +- docs/system/i386/sgx.rst | 2 +- qapi/qom.json | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/devel/atomics.rst b/docs/devel/atomics.rst index ff9b5ee30c..b77c6e13e1 100644 --- a/docs/devel/atomics.rst +++ b/docs/devel/atomics.rst @@ -119,7 +119,7 @@ The only guarantees that you can rely upon in this case are: ordinary accesses instead cause data races if they are concurrent with other accesses of which at least one is a write. In order to ensure this, the compiler will not optimize accesses out of existence, create unsolicited - accesses, or perform other similar optimzations. + accesses, or perform other similar optimizations. - acquire operations will appear to happen, with respect to the other components of the system, before all the LOAD or STORE operations diff --git a/docs/devel/ci-jobs.rst.inc b/docs/devel/ci-jobs.rst.inc index ec33e6ee2b..be06322279 100644 --- a/docs/devel/ci-jobs.rst.inc +++ b/docs/devel/ci-jobs.rst.inc @@ -115,7 +115,7 @@ CI pipeline. QEMU_JOB_SKIPPED ~~~~~~~~~~~~~~~~ -The job is not reliably successsful in general, so is not +The job is not reliably successful in general, so is not currently suitable to be run by default. Ideally this should be a temporary marker until the problems can be addressed, or the job permanently removed. diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index b2d1148cdb..177ee1c90d 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -279,7 +279,7 @@ You can change the multiplier and divider of a clock at runtime, so you can use this to model clock controller devices which have guest-programmable frequency multipliers or dividers. -Similary to ``clock_set()``, ``clock_set_mul_div()`` returns ``true`` if +Similarly to ``clock_set()``, ``clock_set_mul_div()`` returns ``true`` if the clock state was modified; that is, if the multiplier or the diviser or both were changed by the call. diff --git a/docs/system/i386/sgx.rst b/docs/system/i386/sgx.rst index 0f0a73f758..c293f7f44e 100644 --- a/docs/system/i386/sgx.rst +++ b/docs/system/i386/sgx.rst @@ -6,7 +6,7 @@ Overview Intel Software Guard eXtensions (SGX) is a set of instructions and mechanisms for memory accesses in order to provide security accesses for sensitive -applications and data. SGX allows an application to use it's pariticular +applications and data. SGX allows an application to use its particular address space as an *enclave*, which is a protected area provides confidentiality and integrity even in the presence of privileged malware. Accesses to the enclave memory area from any software not resident in the enclave are prevented, diff --git a/qapi/qom.json b/qapi/qom.json index 8d4ca8ed92..85e6b4f84a 100644 --- a/qapi/qom.json +++ b/qapi/qom.json @@ -802,7 +802,7 @@ # # @fd: file descriptor name previously passed via 'getfd' command, # which represents a pre-opened /dev/iommu. This allows the -# iommufd object to be shared accross several subsystems (VFIO, +# iommufd object to be shared across several subsystems (VFIO, # VDPA, ...), and the file descriptor to be shared with other # process, e.g. DPDK. (default: QEMU opens /dev/iommu by itself) # -- 2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Weil <sw@weilnetz.de> To: "Alex Bennée" <alex.bennee@linaro.org>, "Philippe Mathieu-Daudé" <philmd@linaro.org>, "Thomas Huth" <thuth@redhat.com>, "Luc Michel" <luc@lmichel.fr>, "Eric Blake" <eblake@redhat.com>, "Paolo Bonzini" <pbonzini@redhat.com> Cc: kvm@vger.kernel.org, qemu-devel@nongnu.org, qemu-trivial@nongnu.org, Stefan Weil <sw@weilnetz.de> Subject: [PATCH for-9.0] Fix some typos in documentation (found by codespell) Date: Sun, 31 Mar 2024 18:15:26 +0200 [thread overview] Message-ID: <20240331161526.1746598-1-sw@weilnetz.de> (raw) Signed-off-by: Stefan Weil <sw@weilnetz.de> --- docs/devel/atomics.rst | 2 +- docs/devel/ci-jobs.rst.inc | 2 +- docs/devel/clocks.rst | 2 +- docs/system/i386/sgx.rst | 2 +- qapi/qom.json | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/devel/atomics.rst b/docs/devel/atomics.rst index ff9b5ee30c..b77c6e13e1 100644 --- a/docs/devel/atomics.rst +++ b/docs/devel/atomics.rst @@ -119,7 +119,7 @@ The only guarantees that you can rely upon in this case are: ordinary accesses instead cause data races if they are concurrent with other accesses of which at least one is a write. In order to ensure this, the compiler will not optimize accesses out of existence, create unsolicited - accesses, or perform other similar optimzations. + accesses, or perform other similar optimizations. - acquire operations will appear to happen, with respect to the other components of the system, before all the LOAD or STORE operations diff --git a/docs/devel/ci-jobs.rst.inc b/docs/devel/ci-jobs.rst.inc index ec33e6ee2b..be06322279 100644 --- a/docs/devel/ci-jobs.rst.inc +++ b/docs/devel/ci-jobs.rst.inc @@ -115,7 +115,7 @@ CI pipeline. QEMU_JOB_SKIPPED ~~~~~~~~~~~~~~~~ -The job is not reliably successsful in general, so is not +The job is not reliably successful in general, so is not currently suitable to be run by default. Ideally this should be a temporary marker until the problems can be addressed, or the job permanently removed. diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index b2d1148cdb..177ee1c90d 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -279,7 +279,7 @@ You can change the multiplier and divider of a clock at runtime, so you can use this to model clock controller devices which have guest-programmable frequency multipliers or dividers. -Similary to ``clock_set()``, ``clock_set_mul_div()`` returns ``true`` if +Similarly to ``clock_set()``, ``clock_set_mul_div()`` returns ``true`` if the clock state was modified; that is, if the multiplier or the diviser or both were changed by the call. diff --git a/docs/system/i386/sgx.rst b/docs/system/i386/sgx.rst index 0f0a73f758..c293f7f44e 100644 --- a/docs/system/i386/sgx.rst +++ b/docs/system/i386/sgx.rst @@ -6,7 +6,7 @@ Overview Intel Software Guard eXtensions (SGX) is a set of instructions and mechanisms for memory accesses in order to provide security accesses for sensitive -applications and data. SGX allows an application to use it's pariticular +applications and data. SGX allows an application to use its particular address space as an *enclave*, which is a protected area provides confidentiality and integrity even in the presence of privileged malware. Accesses to the enclave memory area from any software not resident in the enclave are prevented, diff --git a/qapi/qom.json b/qapi/qom.json index 8d4ca8ed92..85e6b4f84a 100644 --- a/qapi/qom.json +++ b/qapi/qom.json @@ -802,7 +802,7 @@ # # @fd: file descriptor name previously passed via 'getfd' command, # which represents a pre-opened /dev/iommu. This allows the -# iommufd object to be shared accross several subsystems (VFIO, +# iommufd object to be shared across several subsystems (VFIO, # VDPA, ...), and the file descriptor to be shared with other # process, e.g. DPDK. (default: QEMU opens /dev/iommu by itself) # -- 2.39.2
next reply other threads:[~2024-03-31 16:16 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-31 16:15 Stefan Weil via [this message] 2024-03-31 16:15 ` [PATCH for-9.0] Fix some typos in documentation (found by codespell) Stefan Weil 2024-03-31 17:30 ` Michael Tokarev 2024-04-02 6:42 ` Luc Michel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240331161526.1746598-1-sw@weilnetz.de \ --to=qemu-devel@nongnu.org \ --cc=alex.bennee@linaro.org \ --cc=eblake@redhat.com \ --cc=kvm@vger.kernel.org \ --cc=luc@lmichel.fr \ --cc=pbonzini@redhat.com \ --cc=philmd@linaro.org \ --cc=qemu-trivial@nongnu.org \ --cc=sw@weilnetz.de \ --cc=thuth@redhat.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.