From: Krzysztof Kozlowski <krzk@kernel.org>
To: Conor Dooley <conor@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Lars Povlsen <lars.povlsen@microchip.com>,
Steen Hegelund <Steen.Hegelund@microchip.com>,
Daniel Machon <daniel.machon@microchip.com>,
UNGLinuxDriver@microchip.com,
"David S. Miller" <davem@davemloft.net>,
Bjarni Jonasson <bjarni.jonasson@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 07/10] arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses
Date: Mon, 1 Apr 2024 17:37:37 +0200 [thread overview]
Message-ID: <20240401153740.123978-7-krzk@kernel.org> (raw)
In-Reply-To: <20240401153740.123978-1-krzk@kernel.org>
GPIO leds should not have unit addresses (no "reg" property), as
reported by dtc W=1 warnings:
sparx5_pcb134_board.dtsi:18.9-21.5: Warning (unit_address_vs_reg): /leds/led@0: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../dts/microchip/sparx5_pcb134_board.dtsi | 96 +++++++++----------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index cafec6ef0d0f..f165a409bc1d 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -15,234 +15,234 @@ gpio-restart {
leds {
compatible = "gpio-leds";
- led@0 {
+ led-0 {
label = "twr0:green";
gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
};
- led@1 {
+ led-1 {
label = "twr0:yellow";
gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
};
- led@2 {
+ led-2 {
label = "twr1:green";
gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
};
- led@3 {
+ led-3 {
label = "twr1:yellow";
gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
};
- led@4 {
+ led-4 {
label = "twr2:green";
gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
};
- led@5 {
+ led-5 {
label = "twr2:yellow";
gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
};
- led@6 {
+ led-6 {
label = "twr3:green";
gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
};
- led@7 {
+ led-7 {
label = "twr3:yellow";
gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
};
- led@8 {
+ led-8 {
label = "eth12:green";
gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@9 {
+ led-9 {
label = "eth12:yellow";
gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@10 {
+ led-10 {
label = "eth13:green";
gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@11 {
+ led-11 {
label = "eth13:yellow";
gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@12 {
+ led-12 {
label = "eth14:green";
gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@13 {
+ led-13 {
label = "eth14:yellow";
gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@14 {
+ led-14 {
label = "eth15:green";
gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@15 {
+ led-15 {
label = "eth15:yellow";
gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@16 {
+ led-16 {
label = "eth48:green";
gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@17 {
+ led-17 {
label = "eth48:yellow";
gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@18 {
+ led-18 {
label = "eth49:green";
gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@19 {
+ led-19 {
label = "eth49:yellow";
gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@20 {
+ led-20 {
label = "eth50:green";
gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@21 {
+ led-21 {
label = "eth50:yellow";
gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@22 {
+ led-22 {
label = "eth51:green";
gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@23 {
+ led-23 {
label = "eth51:yellow";
gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@24 {
+ led-24 {
label = "eth52:green";
gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@25 {
+ led-25 {
label = "eth52:yellow";
gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@26 {
+ led-26 {
label = "eth53:green";
gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@27 {
+ led-27 {
label = "eth53:yellow";
gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@28 {
+ led-28 {
label = "eth54:green";
gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@29 {
+ led-29 {
label = "eth54:yellow";
gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@30 {
+ led-30 {
label = "eth55:green";
gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@31 {
+ led-31 {
label = "eth55:yellow";
gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@32 {
+ led-32 {
label = "eth56:green";
gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@33 {
+ led-33 {
label = "eth56:yellow";
gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@34 {
+ led-34 {
label = "eth57:green";
gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@35 {
+ led-35 {
label = "eth57:yellow";
gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@36 {
+ led-36 {
label = "eth58:green";
gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@37 {
+ led-37 {
label = "eth58:yellow";
gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@38 {
+ led-38 {
label = "eth59:green";
gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@39 {
+ led-39 {
label = "eth59:yellow";
gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@40 {
+ led-40 {
label = "eth60:green";
gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@41 {
+ led-41 {
label = "eth60:yellow";
gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@42 {
+ led-42 {
label = "eth61:green";
gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@43 {
+ led-43 {
label = "eth61:yellow";
gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@44 {
+ led-44 {
label = "eth62:green";
gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@45 {
+ led-45 {
label = "eth62:yellow";
gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@46 {
+ led-46 {
label = "eth63:green";
gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@47 {
+ led-47 {
label = "eth63:yellow";
gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Conor Dooley <conor@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Lars Povlsen <lars.povlsen@microchip.com>,
Steen Hegelund <Steen.Hegelund@microchip.com>,
Daniel Machon <daniel.machon@microchip.com>,
UNGLinuxDriver@microchip.com,
"David S. Miller" <davem@davemloft.net>,
Bjarni Jonasson <bjarni.jonasson@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 07/10] arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses
Date: Mon, 1 Apr 2024 17:37:37 +0200 [thread overview]
Message-ID: <20240401153740.123978-7-krzk@kernel.org> (raw)
In-Reply-To: <20240401153740.123978-1-krzk@kernel.org>
GPIO leds should not have unit addresses (no "reg" property), as
reported by dtc W=1 warnings:
sparx5_pcb134_board.dtsi:18.9-21.5: Warning (unit_address_vs_reg): /leds/led@0: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../dts/microchip/sparx5_pcb134_board.dtsi | 96 +++++++++----------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index cafec6ef0d0f..f165a409bc1d 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -15,234 +15,234 @@ gpio-restart {
leds {
compatible = "gpio-leds";
- led@0 {
+ led-0 {
label = "twr0:green";
gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
};
- led@1 {
+ led-1 {
label = "twr0:yellow";
gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
};
- led@2 {
+ led-2 {
label = "twr1:green";
gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
};
- led@3 {
+ led-3 {
label = "twr1:yellow";
gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
};
- led@4 {
+ led-4 {
label = "twr2:green";
gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
};
- led@5 {
+ led-5 {
label = "twr2:yellow";
gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
};
- led@6 {
+ led-6 {
label = "twr3:green";
gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
};
- led@7 {
+ led-7 {
label = "twr3:yellow";
gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
};
- led@8 {
+ led-8 {
label = "eth12:green";
gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@9 {
+ led-9 {
label = "eth12:yellow";
gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@10 {
+ led-10 {
label = "eth13:green";
gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@11 {
+ led-11 {
label = "eth13:yellow";
gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@12 {
+ led-12 {
label = "eth14:green";
gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@13 {
+ led-13 {
label = "eth14:yellow";
gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@14 {
+ led-14 {
label = "eth15:green";
gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@15 {
+ led-15 {
label = "eth15:yellow";
gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@16 {
+ led-16 {
label = "eth48:green";
gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@17 {
+ led-17 {
label = "eth48:yellow";
gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@18 {
+ led-18 {
label = "eth49:green";
gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@19 {
+ led-19 {
label = "eth49:yellow";
gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@20 {
+ led-20 {
label = "eth50:green";
gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@21 {
+ led-21 {
label = "eth50:yellow";
gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@22 {
+ led-22 {
label = "eth51:green";
gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@23 {
+ led-23 {
label = "eth51:yellow";
gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@24 {
+ led-24 {
label = "eth52:green";
gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@25 {
+ led-25 {
label = "eth52:yellow";
gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@26 {
+ led-26 {
label = "eth53:green";
gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@27 {
+ led-27 {
label = "eth53:yellow";
gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@28 {
+ led-28 {
label = "eth54:green";
gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@29 {
+ led-29 {
label = "eth54:yellow";
gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@30 {
+ led-30 {
label = "eth55:green";
gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@31 {
+ led-31 {
label = "eth55:yellow";
gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@32 {
+ led-32 {
label = "eth56:green";
gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@33 {
+ led-33 {
label = "eth56:yellow";
gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@34 {
+ led-34 {
label = "eth57:green";
gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@35 {
+ led-35 {
label = "eth57:yellow";
gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@36 {
+ led-36 {
label = "eth58:green";
gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@37 {
+ led-37 {
label = "eth58:yellow";
gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@38 {
+ led-38 {
label = "eth59:green";
gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@39 {
+ led-39 {
label = "eth59:yellow";
gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@40 {
+ led-40 {
label = "eth60:green";
gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@41 {
+ led-41 {
label = "eth60:yellow";
gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@42 {
+ led-42 {
label = "eth61:green";
gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@43 {
+ led-43 {
label = "eth61:yellow";
gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@44 {
+ led-44 {
label = "eth62:green";
gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@45 {
+ led-45 {
label = "eth62:yellow";
gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@46 {
+ led-46 {
label = "eth63:green";
gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@47 {
+ led-47 {
label = "eth63:yellow";
gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-01 15:38 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-01 15:37 [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH 02/10] arm64: dts: microchip: sparx5: correct serdes unit address Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH 03/10] arm64: dts: microchip: sparx5_pcb134: add missing I2C mux unit addresses Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH 04/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH 05/10] arm64: dts: microchip: sparx5_pcb134: align I2C mux node name with bindings Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH 06/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski [this message]
2024-04-01 15:37 ` [PATCH 07/10] arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH 08/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH RFT 09/10] arm64: dts: microchip: sparx5_pcb134: drop duplicated NOR flash Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-05 12:10 ` Steen Hegelund
2024-04-05 12:10 ` Steen Hegelund
2024-04-05 15:45 ` Krzysztof Kozlowski
2024-04-05 15:45 ` Krzysztof Kozlowski
2024-04-01 15:37 ` [PATCH RFT 10/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski
2024-04-01 15:37 ` Krzysztof Kozlowski
2024-04-05 12:11 ` Steen Hegelund
2024-04-05 12:11 ` Steen Hegelund
2024-04-05 15:46 ` Krzysztof Kozlowski
2024-04-05 15:46 ` Krzysztof Kozlowski
2024-04-02 6:26 ` [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg Horatiu Vultur
2024-04-02 6:26 ` Horatiu Vultur
2024-04-02 14:00 ` Steen Hegelund
2024-04-02 14:00 ` Steen Hegelund
2024-04-02 17:46 ` Conor Dooley
2024-04-02 17:46 ` Conor Dooley
2024-04-03 13:03 ` Steen Hegelund
2024-04-03 13:03 ` Steen Hegelund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240401153740.123978-7-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=Steen.Hegelund@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=bjarni.jonasson@microchip.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor@kernel.org \
--cc=daniel.machon@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars.povlsen@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.