From: Krzysztof Kozlowski <krzk@kernel.org> To: Conor Dooley <conor@kernel.org>, Nicolas Ferre <nicolas.ferre@microchip.com>, Claudiu Beznea <claudiu.beznea@tuxon.dev>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lars Povlsen <lars.povlsen@microchip.com>, Steen Hegelund <Steen.Hegelund@microchip.com>, Daniel Machon <daniel.machon@microchip.com>, UNGLinuxDriver@microchip.com, "David S. Miller" <davem@davemloft.net>, Bjarni Jonasson <bjarni.jonasson@microchip.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Subject: [PATCH 08/10] arm64: dts: microchip: sparx5_pcb135: drop LED unit addresses Date: Mon, 1 Apr 2024 17:37:38 +0200 [thread overview] Message-ID: <20240401153740.123978-8-krzk@kernel.org> (raw) In-Reply-To: <20240401153740.123978-1-krzk@kernel.org> GPIO leds should not have unit addresses (no "reg" property), as reported by dtc W=1 warnings: sparx5_pcb135_board.dtsi:18.9-22.5: Warning (unit_address_vs_reg): /leds/led@0: node has a unit name, but no reg or ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../boot/dts/microchip/sparx5_pcb135_board.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 860975ffe0a1..20016efb3656 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -15,42 +15,42 @@ gpio-restart { leds { compatible = "gpio-leds"; - led@0 { + led-0 { label = "eth60:yellow"; gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@1 { + led-1 { label = "eth60:green"; gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@2 { + led-2 { label = "eth61:yellow"; gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@3 { + led-3 { label = "eth61:green"; gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@4 { + led-4 { label = "eth62:yellow"; gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@5 { + led-5 { label = "eth62:green"; gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@6 { + led-6 { label = "eth63:yellow"; gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@7 { + led-7 { label = "eth63:green"; gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; default-state = "off"; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org> To: Conor Dooley <conor@kernel.org>, Nicolas Ferre <nicolas.ferre@microchip.com>, Claudiu Beznea <claudiu.beznea@tuxon.dev>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lars Povlsen <lars.povlsen@microchip.com>, Steen Hegelund <Steen.Hegelund@microchip.com>, Daniel Machon <daniel.machon@microchip.com>, UNGLinuxDriver@microchip.com, "David S. Miller" <davem@davemloft.net>, Bjarni Jonasson <bjarni.jonasson@microchip.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Subject: [PATCH 08/10] arm64: dts: microchip: sparx5_pcb135: drop LED unit addresses Date: Mon, 1 Apr 2024 17:37:38 +0200 [thread overview] Message-ID: <20240401153740.123978-8-krzk@kernel.org> (raw) In-Reply-To: <20240401153740.123978-1-krzk@kernel.org> GPIO leds should not have unit addresses (no "reg" property), as reported by dtc W=1 warnings: sparx5_pcb135_board.dtsi:18.9-22.5: Warning (unit_address_vs_reg): /leds/led@0: node has a unit name, but no reg or ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../boot/dts/microchip/sparx5_pcb135_board.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 860975ffe0a1..20016efb3656 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -15,42 +15,42 @@ gpio-restart { leds { compatible = "gpio-leds"; - led@0 { + led-0 { label = "eth60:yellow"; gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@1 { + led-1 { label = "eth60:green"; gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@2 { + led-2 { label = "eth61:yellow"; gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@3 { + led-3 { label = "eth61:green"; gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@4 { + led-4 { label = "eth62:yellow"; gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@5 { + led-5 { label = "eth62:green"; gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@6 { + led-6 { label = "eth63:yellow"; gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@7 { + led-7 { label = "eth63:green"; gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; default-state = "off"; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-01 15:38 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-01 15:37 [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH 02/10] arm64: dts: microchip: sparx5: correct serdes unit address Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH 03/10] arm64: dts: microchip: sparx5_pcb134: add missing I2C mux unit addresses Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH 04/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH 05/10] arm64: dts: microchip: sparx5_pcb134: align I2C mux node name with bindings Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH 06/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH 07/10] arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski [this message] 2024-04-01 15:37 ` [PATCH 08/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH RFT 09/10] arm64: dts: microchip: sparx5_pcb134: drop duplicated NOR flash Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-05 12:10 ` Steen Hegelund 2024-04-05 12:10 ` Steen Hegelund 2024-04-05 15:45 ` Krzysztof Kozlowski 2024-04-05 15:45 ` Krzysztof Kozlowski 2024-04-01 15:37 ` [PATCH RFT 10/10] arm64: dts: microchip: sparx5_pcb135: " Krzysztof Kozlowski 2024-04-01 15:37 ` Krzysztof Kozlowski 2024-04-05 12:11 ` Steen Hegelund 2024-04-05 12:11 ` Steen Hegelund 2024-04-05 15:46 ` Krzysztof Kozlowski 2024-04-05 15:46 ` Krzysztof Kozlowski 2024-04-02 6:26 ` [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg Horatiu Vultur 2024-04-02 6:26 ` Horatiu Vultur 2024-04-02 14:00 ` Steen Hegelund 2024-04-02 14:00 ` Steen Hegelund 2024-04-02 17:46 ` Conor Dooley 2024-04-02 17:46 ` Conor Dooley 2024-04-03 13:03 ` Steen Hegelund 2024-04-03 13:03 ` Steen Hegelund
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240401153740.123978-8-krzk@kernel.org \ --to=krzk@kernel.org \ --cc=Steen.Hegelund@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=bjarni.jonasson@microchip.com \ --cc=claudiu.beznea@tuxon.dev \ --cc=conor@kernel.org \ --cc=daniel.machon@microchip.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lars.povlsen@microchip.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.