From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-arm-msm@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Amit Pundir <amit.pundir@linaro.org>
Subject: [PATCH v2 1/2] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
Date: Wed, 03 Apr 2024 18:50:03 +0530 [thread overview]
Message-ID: <20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org> (raw)
In-Reply-To: <20240403-ufs-icc-fix-v2-0-958412a5eb45@linaro.org>
These entries are necessary to scale the interconnect bandwidth while
operating in Gear 5.
Cc: Amit Pundir <amit.pundir@linaro.org>
Fixes: 03ce80a1bb86 ("scsi: ufs: qcom: Add support for scaling interconnects")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/ufs/host/ufs-qcom.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 8d68bd21ae73..696540ca835e 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -47,7 +47,7 @@ enum {
TSTBUS_MAX,
};
-#define QCOM_UFS_MAX_GEAR 4
+#define QCOM_UFS_MAX_GEAR 5
#define QCOM_UFS_MAX_LANE 2
enum {
@@ -67,26 +67,32 @@ static const struct __ufs_qcom_bw_table {
[MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844, 1000 },
[MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688, 1000 },
[MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376, 1000 },
+ [MODE_PWM][UFS_PWM_G5][UFS_LANE_1] = { 14752, 1000 },
[MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844, 1000 },
[MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688, 1000 },
[MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376, 1000 },
[MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752, 1000 },
+ [MODE_PWM][UFS_PWM_G5][UFS_LANE_2] = { 29504, 1000 },
[MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796, 1000 },
[MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591, 1000 },
[MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 },
[MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 },
+ [MODE_HS_RA][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 },
[MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591, 1000 },
[MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181, 1000 },
[MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 },
[MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 },
+ [MODE_HS_RA][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 },
[MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422, 1000 },
[MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189, 1000 },
[MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 },
[MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 },
+ [MODE_HS_RB][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 },
[MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189, 1000 },
[MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378, 1000 },
[MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 },
[MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 },
+ [MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 },
[MODE_MAX][0][0] = { 7643136, 307200 },
};
--
2.25.1
next prev parent reply other threads:[~2024-04-03 13:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-03 13:20 [PATCH v2 0/2] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 Manivannan Sadhasivam
2024-04-03 13:20 ` Manivannan Sadhasivam [this message]
2024-04-03 13:20 ` [PATCH v2 2/2] scsi: ufs: qcom: Add sanity checks for gear/lane values during ICC scaling Manivannan Sadhasivam
2024-04-03 14:12 ` Andrew Halaney
2024-04-06 1:24 ` [PATCH v2 0/2] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 Martin K. Petersen
2024-04-06 3:56 ` Manivannan Sadhasivam
2024-04-08 19:12 ` Martin K. Petersen
2024-04-09 3:08 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=amit.pundir@linaro.org \
--cc=andersson@kernel.org \
--cc=jejb@linux.ibm.com \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.