From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, Arnd Bergmann <arnd@kernel.org>,
Heiko Carstens <hca@linux.ibm.com>,
linux-kernel@vger.kernel.org,
Niklas Schnelle <schnelle@linux.ibm.com>
Subject: [PATCH 1/1] hwmon: add HAS_IOPORT dependencies
Date: Thu, 4 Apr 2024 14:47:00 +0200 [thread overview]
Message-ID: <20240404124700.3807842-2-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20240404124700.3807842-1-schnelle@linux.ibm.com>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes
and may be merged via subsystem specific trees at your earliest
convenience.
drivers/hwmon/Kconfig | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 83945397b6eb..caacc4057e82 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -40,7 +40,7 @@ comment "Native drivers"
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
- depends on (X86 && DMI) || COMPILE_TEST
+ depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT
help
If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
@@ -55,7 +55,7 @@ config SENSORS_ABITUGURU
config SENSORS_ABITUGURU3
tristate "Abit uGuru (rev 3)"
- depends on (X86 && DMI) || COMPILE_TEST
+ depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT
help
If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
@@ -611,6 +611,7 @@ config SENSORS_SPARX5
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for hardware monitoring
@@ -622,6 +623,7 @@ config SENSORS_F71805F
config SENSORS_F71882FG
tristate "Fintek F71882FG and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for hardware monitoring
@@ -854,6 +856,7 @@ config SENSORS_CORETEMP
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -1561,6 +1564,7 @@ config SENSORS_LM95245
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -1575,6 +1579,7 @@ config SENSORS_PC87360
config SENSORS_PC87427
tristate "National Semiconductor PC87427"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get access to the hardware monitoring
@@ -1606,6 +1611,7 @@ config SENSORS_NTC_THERMISTOR
config SENSORS_NCT6683
tristate "Nuvoton NCT6683D"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the hardware monitoring
@@ -1627,6 +1633,7 @@ config SENSORS_NCT6775_CORE
config SENSORS_NCT6775
tristate "Platform driver for Nuvoton NCT6775F and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
depends on ACPI || ACPI=n
select HWMON_VID
@@ -1883,7 +1890,7 @@ config SENSORS_SHTC1
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
@@ -1903,6 +1910,7 @@ config SENSORS_SY7636A
config SENSORS_DME1737
tristate "SMSC DME1737, SCH311x and compatibles"
+ depends on HAS_IOPORT
depends on I2C && !PPC
select HWMON_VID
help
@@ -1959,6 +1967,7 @@ config SENSORS_EMC6W201
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the integrated fan
@@ -1993,6 +2002,7 @@ config SENSORS_SMSC47M192
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the SMSC LPC47B397-NC
@@ -2007,6 +2017,7 @@ config SENSORS_SCH56XX_COMMON
config SENSORS_SCH5627
tristate "SMSC SCH5627"
+ depends on HAS_IOPORT
depends on !PPC && WATCHDOG
select SENSORS_SCH56XX_COMMON
select WATCHDOG_CORE
@@ -2020,6 +2031,7 @@ config SENSORS_SCH5627
config SENSORS_SCH5636
tristate "SMSC SCH5636"
+ depends on HAS_IOPORT
depends on !PPC && WATCHDOG
select SENSORS_SCH56XX_COMMON
select WATCHDOG_CORE
@@ -2272,7 +2284,7 @@ config SENSORS_VIA_CPUTEMP
config SENSORS_VIA686A
tristate "VIA686A"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
@@ -2282,6 +2294,7 @@ config SENSORS_VIA686A
config SENSORS_VT1211
tristate "VIA VT1211"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -2293,7 +2306,7 @@ config SENSORS_VT1211
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select HWMON_VID
help
If you say yes here then you get support for the integrated sensors
@@ -2401,6 +2414,7 @@ config SENSORS_W83L786NG
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -2413,6 +2427,7 @@ config SENSORS_W83627HF
config SENSORS_W83627EHF
tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
--
2.40.1
next prev parent reply other threads:[~2024-04-04 12:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-04 12:46 [PATCH 0/1] hwmon: Handle HAS_IOPORT dependencies Niklas Schnelle
2024-04-04 12:47 ` Niklas Schnelle [this message]
2024-04-10 14:57 ` [PATCH 1/1] hwmon: add " Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240404124700.3807842-2-schnelle@linux.ibm.com \
--to=schnelle@linux.ibm.com \
--cc=arnd@kernel.org \
--cc=hca@linux.ibm.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.