From: Garrett Giordano <ggiordano@phytec.com> To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, w.egorov@phytec.de Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, upstream@lists.phytec.de Subject: [PATCH] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec Date: Thu, 4 Apr 2024 11:42:50 -0700 [thread overview] Message-ID: <20240404184250.3772829-1-ggiordano@phytec.com> (raw) The Audio Codec runs over the MCASP (Multichannel Audio Serial Port). Add pinmux for the Audio Reference Clock and MCASP2. Add DT nodes for Audio Codec, MCASP2, VCC 1v8 and VCC 3v3 regulators. Additionally, create a sound node that connects our sound card and the MCASP2. Signed-off-by: Garrett Giordano <ggiordano@phytec.com> --- .../dts/ti/k3-am625-phyboard-lyra-rdk.dts | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts index a83a90497857..dfc78995d30a 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -66,6 +66,35 @@ key-menu { }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Lyra"; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "External Speaker", "SPOP", + "External Speaker", "SPOM"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp2>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&audio_codec>; + clocks = <&audio_refclk1>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -82,6 +111,15 @@ led-2 { }; }; + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + vcc_3v3_mmc: regulator-vcc-3v3-mmc { compatible = "regulator-fixed"; regulator-name = "VCC_3V3_MMC"; @@ -90,9 +128,24 @@ vcc_3v3_mmc: regulator-vcc-3v3-mmc { regulator-always-on; regulator-boot-on; }; + + vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; }; &main_pmx0 { + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; + gpio_keys_pins_default: gpio-keys-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ @@ -150,6 +203,15 @@ AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ >; }; + main_mcasp2_pins_default: main-mcasp2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */ + AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */ + AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */ + AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ @@ -254,6 +316,21 @@ &main_i2c1 { clock-frequency = <100000>; status = "okay"; + audio_codec: audio-codec@18 { + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; + + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + ai3x-micbias-vg = <2>; + + AVDD-supply = <&vcc_3v3_sw>; + IOVDD-supply = <&vcc_3v3_sw>; + DRVDD-supply = <&vcc_3v3_sw>; + DVDD-supply = <&vcc_1v8>; + }; + gpio_exp: gpio-expander@21 { pinctrl-names = "default"; pinctrl-0 = <&gpio_exp_int_pins_default>; @@ -329,6 +406,28 @@ &main_uart1 { status = "okay"; }; +&mcasp2 { + status = "okay"; + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp2_pins_default>; + + /* MCASP_IIS_MODE */ + op-mode = <0>; + tdm-slots = <2>; + + /* 0: INACTIVE, 1: TX, 2: RX */ + serial-dir = < + 0 0 1 2 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + &sdhci1 { vmmc-supply = <&vcc_3v3_mmc>; vqmmc-supply = <&vddshv5_sdio>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Garrett Giordano <ggiordano@phytec.com> To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, w.egorov@phytec.de Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, upstream@lists.phytec.de Subject: [PATCH] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec Date: Thu, 4 Apr 2024 11:42:50 -0700 [thread overview] Message-ID: <20240404184250.3772829-1-ggiordano@phytec.com> (raw) The Audio Codec runs over the MCASP (Multichannel Audio Serial Port). Add pinmux for the Audio Reference Clock and MCASP2. Add DT nodes for Audio Codec, MCASP2, VCC 1v8 and VCC 3v3 regulators. Additionally, create a sound node that connects our sound card and the MCASP2. Signed-off-by: Garrett Giordano <ggiordano@phytec.com> --- .../dts/ti/k3-am625-phyboard-lyra-rdk.dts | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts index a83a90497857..dfc78995d30a 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -66,6 +66,35 @@ key-menu { }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Lyra"; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "External Speaker", "SPOP", + "External Speaker", "SPOM"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp2>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&audio_codec>; + clocks = <&audio_refclk1>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -82,6 +111,15 @@ led-2 { }; }; + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + vcc_3v3_mmc: regulator-vcc-3v3-mmc { compatible = "regulator-fixed"; regulator-name = "VCC_3V3_MMC"; @@ -90,9 +128,24 @@ vcc_3v3_mmc: regulator-vcc-3v3-mmc { regulator-always-on; regulator-boot-on; }; + + vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; }; &main_pmx0 { + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; + gpio_keys_pins_default: gpio-keys-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ @@ -150,6 +203,15 @@ AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ >; }; + main_mcasp2_pins_default: main-mcasp2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */ + AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */ + AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */ + AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */ + >; + }; + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ @@ -254,6 +316,21 @@ &main_i2c1 { clock-frequency = <100000>; status = "okay"; + audio_codec: audio-codec@18 { + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; + + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + ai3x-micbias-vg = <2>; + + AVDD-supply = <&vcc_3v3_sw>; + IOVDD-supply = <&vcc_3v3_sw>; + DRVDD-supply = <&vcc_3v3_sw>; + DVDD-supply = <&vcc_1v8>; + }; + gpio_exp: gpio-expander@21 { pinctrl-names = "default"; pinctrl-0 = <&gpio_exp_int_pins_default>; @@ -329,6 +406,28 @@ &main_uart1 { status = "okay"; }; +&mcasp2 { + status = "okay"; + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp2_pins_default>; + + /* MCASP_IIS_MODE */ + op-mode = <0>; + tdm-slots = <2>; + + /* 0: INACTIVE, 1: TX, 2: RX */ + serial-dir = < + 0 0 1 2 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + &sdhci1 { vmmc-supply = <&vcc_3v3_mmc>; vqmmc-supply = <&vddshv5_sdio>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-04-04 18:43 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-04 18:42 Garrett Giordano [this message] 2024-04-04 18:42 ` [PATCH] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec Garrett Giordano 2024-04-09 17:10 ` Wadim Egorov 2024-04-09 17:10 ` Wadim Egorov 2024-04-26 22:38 ` Nishanth Menon 2024-04-26 22:38 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240404184250.3772829-1-ggiordano@phytec.com \ --to=ggiordano@phytec.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh@kernel.org \ --cc=upstream@lists.phytec.de \ --cc=vigneshr@ti.com \ --cc=w.egorov@phytec.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.