[PATCH 3/3] pinctrl: scmi: support i.MX OEM pin configuration type

From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>, Peng Fan <peng.fan@arm.com>,
	 Sudeep Holla <sudeep.holla@arm.com>,
	 Cristian Marussi <cristian.marussi@arm.com>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	 imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH 3/3] pinctrl: scmi: support i.MX OEM pin configuration type
Date: Fri, 12 Apr 2024 08:29:27 +0800	[thread overview]
Message-ID: <20240412-pinctrl-scmi-oem-v1-v1-3-704f242544c1@nxp.com> (raw)
In-Reply-To: <20240412-pinctrl-scmi-oem-v1-v1-0-704f242544c1@nxp.com>

From: Peng Fan <peng.fan@nxp.com>

i.MX95 System Manager FW supports SCMI PINCTRL protocol, but uses
OEM Pin Configuration type, so extend the driver to support custom
params.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/pinctrl/pinctrl-scmi.c | 23 +++++++++++++++++++++++
 drivers/pinctrl/pinctrl-scmi.h | 15 +++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-scmi.c b/drivers/pinctrl/pinctrl-scmi.c
index 0f55f000a679..97c3d9d4634b 100644
--- a/drivers/pinctrl/pinctrl-scmi.c
+++ b/drivers/pinctrl/pinctrl-scmi.c
@@ -20,6 +20,7 @@
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 
+#include "pinctrl-scmi.h"
 #include "pinctrl-utils.h"
 #include "core.h"
 #include "pinconf.h"
@@ -462,6 +463,23 @@ static const struct pinconf_ops pinctrl_scmi_pinconf_ops = {
 	.pin_config_config_dbg_show = pinconf_generic_dump_config,
 };
 
+static const struct pinconf_generic_params pinctrl_scmi_oem_dt_params[] = {
+	{"nxp,func-id", IMX_SCMI_PIN_MUX, -1},
+	{"nxp,daisy-id", IMX_SCMI_PIN_DAISY_ID, -1},
+	{"nxp,daisy-conf", IMX_SCMI_PIN_DAISY_CFG, -1},
+	{"nxp,pin-conf", IMX_SCMI_PIN_CONF, -1},
+};
+
+#ifdef CONFIG_DEBUG_FS
+static const
+struct pin_config_item pinctrl_scmi_oem_conf_items[ARRAY_SIZE(pinctrl_scmi_oem_dt_params)] = {
+	PCONFDUMP(IMX_SCMI_PIN_MUX, "FUNC-ID", NULL, true),
+	PCONFDUMP(IMX_SCMI_PIN_DAISY_ID, "DAISY-ID", NULL, true),
+	PCONFDUMP(IMX_SCMI_PIN_DAISY_CFG, "DAISY-CFG", NULL, true),
+	PCONFDUMP(IMX_SCMI_PIN_CONF, "PIN-CONF", NULL, true),
+};
+#endif
+
 static int pinctrl_scmi_get_pins(struct scmi_pinctrl *pmx,
 				 struct pinctrl_desc *desc)
 {
@@ -526,6 +544,11 @@ static int scmi_pinctrl_probe(struct scmi_device *sdev)
 	pmx->pctl_desc.pctlops = &pinctrl_scmi_pinctrl_ops;
 	pmx->pctl_desc.pmxops = &pinctrl_scmi_pinmux_ops;
 	pmx->pctl_desc.confops = &pinctrl_scmi_pinconf_ops;
+	pmx->pctl_desc.custom_params = pinctrl_scmi_oem_dt_params;
+	pmx->pctl_desc.num_custom_params = ARRAY_SIZE(pinctrl_scmi_oem_dt_params);
+#ifdef CONFIG_DEBUG_FS
+	pmx->pctl_desc.custom_conf_items = pinctrl_scmi_oem_conf_items;
+#endif
 
 	ret = pinctrl_scmi_get_pins(pmx, &pmx->pctl_desc);
 	if (ret)
diff --git a/drivers/pinctrl/pinctrl-scmi.h b/drivers/pinctrl/pinctrl-scmi.h
new file mode 100644
index 000000000000..fcc61bc19c98
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-scmi.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DRIVERS_PINCTRL_SCMI_H
+#define __DRIVERS_PINCTRL_SCMI_H
+
+/* OEM VENDOR Pin Configuration Type */
+#define IMX_SCMI_PIN_MUX	192
+#define IMX_SCMI_PIN_CONF	193
+#define IMX_SCMI_PIN_DAISY_ID	194
+#define IMX_SCMI_PIN_DAISY_CFG	195
+
+#endif /* __DRIVERS_PINCTRL_SCMI_H */

-- 
2.37.1

