All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jagadeesh Kona <quic_jkona@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Stanimir Varbanov <stanimir.k.varbanov@gmail.com>,
	Vikash Garodia <quic_vgarodia@quicinc.com>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Kevin Hilman <khilman@kernel.org>, Pavel Machek <pavel@ucw.cz>,
	Len Brown <len.brown@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	"Andy Gross" <agross@kernel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Abel Vesa <abel.vesa@linaro.org>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
	<linux-pm@vger.kernel.org>, Taniya Das <quic_tdas@quicinc.com>,
	"Satya Priya Kakitapalli" <quic_skakitap@quicinc.com>,
	Imran Shaik <quic_imrashai@quicinc.com>,
	Ajit Pandey <quic_ajipan@quicinc.com>,
	"Jagadeesh Kona" <quic_jkona@quicinc.com>
Subject: [PATCH V5 RESEND 5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
Date: Sat, 13 Apr 2024 20:50:13 +0530	[thread overview]
Message-ID: <20240413152013.22307-6-quic_jkona@quicinc.com> (raw)
In-Reply-To: <20240413152013.22307-1-quic_jkona@quicinc.com>

The Venus driver requires vcodec GDSC to be ON in SW mode for clock
operations and move it back to HW mode to gain power benefits. Earlier,
as there is no interface to switch the GDSC mode from GenPD framework,
the GDSC is moved to HW control mode as part of GDSC enable callback and
venus driver is writing to its POWER_CONTROL register to keep the GDSC ON
from SW whereever required. But the POWER_CONTROL register addresses
are not constant and can vary across the variants.

Also as per the HW recommendation, the GDSC mode switching needs to be
controlled from respective GDSC register and this is a uniform approach
across all the targets. Hence use dev_pm_genpd_set_hwmode() API which
controls GDSC mode switching using its respective GDSC register.

In venus V6 variants, the vcodec gdsc gets enabled in SW mode by default
with new HW_CTRL_TRIGGER flag and there is no need to switch it to SW
mode again after enable, hence add check to avoid switching gdsc to SW mode
again after gdsc enable. Similarly add check to avoid switching GDSC to HW
mode before disabling the GDSC, so GDSC gets enabled in SW mode in the next
enable.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../media/platform/qcom/venus/pm_helpers.c    | 39 +++++++++++--------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 502822059498..4ce76ce6dd4d 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -412,10 +412,9 @@ static int vcodec_control_v4(struct venus_core *core, u32 coreid, bool enable)
 	u32 val;
 	int ret;
 
-	if (IS_V6(core)) {
-		ctrl = core->wrapper_base + WRAPPER_CORE_POWER_CONTROL_V6;
-		stat = core->wrapper_base + WRAPPER_CORE_POWER_STATUS_V6;
-	} else if (coreid == VIDC_CORE_ID_1) {
+	if (IS_V6(core))
+		return dev_pm_genpd_set_hwmode(core->pmdomains->pd_devs[coreid], !enable);
+	else if (coreid == VIDC_CORE_ID_1) {
 		ctrl = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_CONTROL;
 		stat = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_STATUS;
 	} else {
@@ -451,9 +450,11 @@ static int poweroff_coreid(struct venus_core *core, unsigned int coreid_mask)
 
 		vcodec_clks_disable(core, core->vcodec0_clks);
 
-		ret = vcodec_control_v4(core, VIDC_CORE_ID_1, false);
-		if (ret)
-			return ret;
+		if (!IS_V6(core)) {
+			ret = vcodec_control_v4(core, VIDC_CORE_ID_1, false);
+			if (ret)
+				return ret;
+		}
 
 		ret = pm_runtime_put_sync(core->pmdomains->pd_devs[1]);
 		if (ret < 0)
@@ -467,9 +468,11 @@ static int poweroff_coreid(struct venus_core *core, unsigned int coreid_mask)
 
 		vcodec_clks_disable(core, core->vcodec1_clks);
 
-		ret = vcodec_control_v4(core, VIDC_CORE_ID_2, false);
-		if (ret)
-			return ret;
+		if (!IS_V6(core)) {
+			ret = vcodec_control_v4(core, VIDC_CORE_ID_2, false);
+			if (ret)
+				return ret;
+		}
 
 		ret = pm_runtime_put_sync(core->pmdomains->pd_devs[2]);
 		if (ret < 0)
@@ -488,9 +491,11 @@ static int poweron_coreid(struct venus_core *core, unsigned int coreid_mask)
 		if (ret < 0)
 			return ret;
 
-		ret = vcodec_control_v4(core, VIDC_CORE_ID_1, true);
-		if (ret)
-			return ret;
+		if (!IS_V6(core)) {
+			ret = vcodec_control_v4(core, VIDC_CORE_ID_1, true);
+			if (ret)
+				return ret;
+		}
 
 		ret = vcodec_clks_enable(core, core->vcodec0_clks);
 		if (ret)
@@ -506,9 +511,11 @@ static int poweron_coreid(struct venus_core *core, unsigned int coreid_mask)
 		if (ret < 0)
 			return ret;
 
-		ret = vcodec_control_v4(core, VIDC_CORE_ID_2, true);
-		if (ret)
-			return ret;
+		if (!IS_V6(core)) {
+			ret = vcodec_control_v4(core, VIDC_CORE_ID_2, true);
+			if (ret)
+				return ret;
+		}
 
 		ret = vcodec_clks_enable(core, core->vcodec1_clks);
 		if (ret)
-- 
2.43.0


  parent reply	other threads:[~2024-04-13 15:21 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-13 15:20 [PATCH V5 RESEND 0/5] PM: domains: Add control for switching back and forth to HW control Jagadeesh Kona
2024-04-13 15:20 ` [PATCH V5 RESEND 1/5] PM: domains: Allow devices attached to genpd to be managed by HW Jagadeesh Kona
2024-04-13 15:20 ` [PATCH V5 RESEND 2/5] PM: domains: Add the domain HW-managed mode to the summary Jagadeesh Kona
2024-04-13 15:20 ` [PATCH V5 RESEND 3/5] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode Jagadeesh Kona
2024-04-23 23:48   ` Bryan O'Donoghue
2024-04-24  9:47     ` Jagadeesh Kona
2024-04-24  9:55       ` Bryan O'Donoghue
2024-04-24 10:27         ` Jagadeesh Kona
2024-04-24 12:22           ` Konrad Dybcio
2024-04-24 12:25             ` Konrad Dybcio
2024-04-13 15:20 ` [PATCH V5 RESEND 4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode Jagadeesh Kona
2024-04-22 22:54   ` Konrad Dybcio
2024-04-24  9:48     ` Jagadeesh Kona
2024-04-13 15:20 ` Jagadeesh Kona [this message]
2024-04-14 12:39   ` [PATCH V5 RESEND 5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6 Bryan O'Donoghue
2024-04-14 14:52     ` Jagadeesh Kona
2024-04-24  0:16       ` Bryan O'Donoghue
2024-04-24  9:45         ` Jagadeesh Kona
2024-04-24  9:50           ` Bryan O'Donoghue
2024-04-30 20:01             ` Konrad Dybcio
2024-05-01  9:14               ` Bryan O'Donoghue
2024-05-10 13:01                 ` Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240413152013.22307-6-quic_jkona@quicinc.com \
    --to=quic_jkona@quicinc.com \
    --cc=abel.vesa@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=khilman@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=len.brown@intel.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pavel@ucw.cz \
    --cc=quic_ajipan@quicinc.com \
    --cc=quic_imrashai@quicinc.com \
    --cc=quic_skakitap@quicinc.com \
    --cc=quic_tdas@quicinc.com \
    --cc=quic_vgarodia@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=stanimir.k.varbanov@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.