All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Arınç ÜNAL via B4 Relay" <devnull+arinc.unal.arinc9.com@kernel.org>
To: Daniel Golle <daniel@makrotopia.org>,
	DENG Qingfang <dqfext@gmail.com>,
	 Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
	 Florian Fainelli <f.fainelli@gmail.com>,
	 Vladimir Oltean <olteanv@gmail.com>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	 Matthias Brugger <matthias.bgg@gmail.com>,
	 AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: "Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
	mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations
Date: Sun, 14 Apr 2024 01:08:20 +0300	[thread overview]
Message-ID: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-2-b08936df2770@arinc9.com> (raw)
In-Reply-To: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-0-b08936df2770@arinc9.com>

From: Arınç ÜNAL <arinc.unal@arinc9.com>

The core_rmw() function calls core_read_mmd_indirect() to read the
requested register, and then calls core_write_mmd_indirect() to write the
requested value to the register. Because Clause 22 is used to access Clause
45 registers, some operations on core_write_mmd_indirect() are
unnecessarily run. Get rid of core_read_mmd_indirect() and
core_write_mmd_indirect(), and run only the necessary operations on
core_write() and core_rmw().

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/dsa/mt7530.c | 108 +++++++++++++++++++----------------------------
 1 file changed, 43 insertions(+), 65 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fefa6dd151fa..2650eacf87a7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -74,116 +74,94 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
 	MIB_DESC(1, 0xb8, "RxArlDrop"),
 };
 
-/* Since phy_device has not yet been created and
- * phy_{read,write}_mmd_indirect is not available, we provide our own
- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
- * to complete this function.
- */
-static int
-core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+static void
+mt7530_mutex_lock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mutex_unlock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
 {
 	struct mii_bus *bus = priv->bus;
-	int value, ret;
+	int ret;
+
+	mt7530_mutex_lock(priv);
 
 	/* Write the desired MMD Devad */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, prtad);
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
-	/* Read the content of the MMD's selected register */
-	value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			  MII_MMD_DATA);
-
-	return value;
+	/* Write the data into MMD's selected register */
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+			 MII_MMD_DATA, val);
 err:
-	dev_err(&bus->dev,  "failed to read mmd register\n");
+	if (ret < 0)
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
-	return ret;
+	mt7530_mutex_unlock(priv);
 }
 
-static int
-core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
-			int devad, u32 data)
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
 {
 	struct mii_bus *bus = priv->bus;
+	u32 val;
 	int ret;
 
+	mt7530_mutex_lock(priv);
+
 	/* Write the desired MMD Devad */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, prtad);
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
+	/* Read the content of the MMD's selected register */
+	val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+			MII_MMD_DATA);
+	val &= ~mask;
+	val |= set;
 	/* Write the data into MMD's selected register */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, data);
+			 MII_MMD_DATA, val);
 err:
 	if (ret < 0)
-		dev_err(&bus->dev,
-			"failed to write mmd register\n");
-	return ret;
-}
-
-static void
-mt7530_mutex_lock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-}
-
-static void
-mt7530_mutex_unlock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_unlock(&priv->bus->mdio_lock);
-}
-
-static void
-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
-	mt7530_mutex_lock(priv);
-
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-
-	mt7530_mutex_unlock(priv);
-}
-
-static void
-core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
-{
-	u32 val;
-
-	mt7530_mutex_lock(priv);
-
-	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
-	val &= ~mask;
-	val |= set;
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
 	mt7530_mutex_unlock(priv);
 }

-- 
2.40.1



WARNING: multiple messages have this Message-ID (diff)
From: "Arınç ÜNAL via B4 Relay" <devnull+arinc.unal.arinc9.com@kernel.org>
To: Daniel Golle <daniel@makrotopia.org>,
	DENG Qingfang <dqfext@gmail.com>,
	 Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
	 Florian Fainelli <f.fainelli@gmail.com>,
	 Vladimir Oltean <olteanv@gmail.com>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	 Matthias Brugger <matthias.bgg@gmail.com>,
	 AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: "Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
	mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations
Date: Sun, 14 Apr 2024 01:08:20 +0300	[thread overview]
Message-ID: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-2-b08936df2770@arinc9.com> (raw)
In-Reply-To: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-0-b08936df2770@arinc9.com>

From: Arınç ÜNAL <arinc.unal@arinc9.com>

The core_rmw() function calls core_read_mmd_indirect() to read the
requested register, and then calls core_write_mmd_indirect() to write the
requested value to the register. Because Clause 22 is used to access Clause
45 registers, some operations on core_write_mmd_indirect() are
unnecessarily run. Get rid of core_read_mmd_indirect() and
core_write_mmd_indirect(), and run only the necessary operations on
core_write() and core_rmw().

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/dsa/mt7530.c | 108 +++++++++++++++++++----------------------------
 1 file changed, 43 insertions(+), 65 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fefa6dd151fa..2650eacf87a7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -74,116 +74,94 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
 	MIB_DESC(1, 0xb8, "RxArlDrop"),
 };
 
-/* Since phy_device has not yet been created and
- * phy_{read,write}_mmd_indirect is not available, we provide our own
- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
- * to complete this function.
- */
-static int
-core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+static void
+mt7530_mutex_lock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mutex_unlock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
 {
 	struct mii_bus *bus = priv->bus;
-	int value, ret;
+	int ret;
+
+	mt7530_mutex_lock(priv);
 
 	/* Write the desired MMD Devad */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, prtad);
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
-	/* Read the content of the MMD's selected register */
-	value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			  MII_MMD_DATA);
-
-	return value;
+	/* Write the data into MMD's selected register */
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+			 MII_MMD_DATA, val);
 err:
-	dev_err(&bus->dev,  "failed to read mmd register\n");
+	if (ret < 0)
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
-	return ret;
+	mt7530_mutex_unlock(priv);
 }
 
-static int
-core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
-			int devad, u32 data)
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
 {
 	struct mii_bus *bus = priv->bus;
+	u32 val;
 	int ret;
 
+	mt7530_mutex_lock(priv);
+
 	/* Write the desired MMD Devad */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, prtad);
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
+	/* Read the content of the MMD's selected register */
+	val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+			MII_MMD_DATA);
+	val &= ~mask;
+	val |= set;
 	/* Write the data into MMD's selected register */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, data);
+			 MII_MMD_DATA, val);
 err:
 	if (ret < 0)
-		dev_err(&bus->dev,
-			"failed to write mmd register\n");
-	return ret;
-}
-
-static void
-mt7530_mutex_lock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-}
-
-static void
-mt7530_mutex_unlock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_unlock(&priv->bus->mdio_lock);
-}
-
-static void
-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
-	mt7530_mutex_lock(priv);
-
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-
-	mt7530_mutex_unlock(priv);
-}
-
-static void
-core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
-{
-	u32 val;
-
-	mt7530_mutex_lock(priv);
-
-	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
-	val &= ~mask;
-	val |= set;
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
 	mt7530_mutex_unlock(priv);
 }

-- 
2.40.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Daniel Golle <daniel@makrotopia.org>,
	DENG Qingfang <dqfext@gmail.com>,
	 Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
	 Florian Fainelli <f.fainelli@gmail.com>,
	 Vladimir Oltean <olteanv@gmail.com>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	 Matthias Brugger <matthias.bgg@gmail.com>,
	 AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: "Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
	mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations
Date: Sun, 14 Apr 2024 01:08:20 +0300	[thread overview]
Message-ID: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-2-b08936df2770@arinc9.com> (raw)
In-Reply-To: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-0-b08936df2770@arinc9.com>

The core_rmw() function calls core_read_mmd_indirect() to read the
requested register, and then calls core_write_mmd_indirect() to write the
requested value to the register. Because Clause 22 is used to access Clause
45 registers, some operations on core_write_mmd_indirect() are
unnecessarily run. Get rid of core_read_mmd_indirect() and
core_write_mmd_indirect(), and run only the necessary operations on
core_write() and core_rmw().

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/dsa/mt7530.c | 108 +++++++++++++++++++----------------------------
 1 file changed, 43 insertions(+), 65 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fefa6dd151fa..2650eacf87a7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -74,116 +74,94 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
 	MIB_DESC(1, 0xb8, "RxArlDrop"),
 };
 
-/* Since phy_device has not yet been created and
- * phy_{read,write}_mmd_indirect is not available, we provide our own
- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
- * to complete this function.
- */
-static int
-core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+static void
+mt7530_mutex_lock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mutex_unlock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
 {
 	struct mii_bus *bus = priv->bus;
-	int value, ret;
+	int ret;
+
+	mt7530_mutex_lock(priv);
 
 	/* Write the desired MMD Devad */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, prtad);
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
-	/* Read the content of the MMD's selected register */
-	value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			  MII_MMD_DATA);
-
-	return value;
+	/* Write the data into MMD's selected register */
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+			 MII_MMD_DATA, val);
 err:
-	dev_err(&bus->dev,  "failed to read mmd register\n");
+	if (ret < 0)
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
-	return ret;
+	mt7530_mutex_unlock(priv);
 }
 
-static int
-core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
-			int devad, u32 data)
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
 {
 	struct mii_bus *bus = priv->bus;
+	u32 val;
 	int ret;
 
+	mt7530_mutex_lock(priv);
+
 	/* Write the desired MMD Devad */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, prtad);
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
+	/* Read the content of the MMD's selected register */
+	val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+			MII_MMD_DATA);
+	val &= ~mask;
+	val |= set;
 	/* Write the data into MMD's selected register */
 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
-			 MII_MMD_DATA, data);
+			 MII_MMD_DATA, val);
 err:
 	if (ret < 0)
-		dev_err(&bus->dev,
-			"failed to write mmd register\n");
-	return ret;
-}
-
-static void
-mt7530_mutex_lock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-}
-
-static void
-mt7530_mutex_unlock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_unlock(&priv->bus->mdio_lock);
-}
-
-static void
-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
-	mt7530_mutex_lock(priv);
-
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-
-	mt7530_mutex_unlock(priv);
-}
-
-static void
-core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
-{
-	u32 val;
-
-	mt7530_mutex_lock(priv);
-
-	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
-	val &= ~mask;
-	val |= set;
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
 	mt7530_mutex_unlock(priv);
 }

-- 
2.40.1


  parent reply	other threads:[~2024-04-13 22:08 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-13 22:08 [PATCH net-next 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver Arınç ÜNAL via B4 Relay
2024-04-13 22:08 ` Arınç ÜNAL
2024-04-13 22:08 ` Arınç ÜNAL via B4 Relay
2024-04-13 22:08 ` [PATCH net-next 1/2] net: dsa: mt7530-mdio: read PHY address of switch from device tree Arınç ÜNAL via B4 Relay
2024-04-13 22:08   ` Arınç ÜNAL
2024-04-13 22:08   ` Arınç ÜNAL via B4 Relay
2024-04-14  3:10   ` Daniel Golle
2024-04-14  3:10     ` Daniel Golle
2024-04-14  5:59     ` Arınç ÜNAL
2024-04-14  5:59       ` Arınç ÜNAL
2024-04-14  8:06     ` Christophe JAILLET
2024-04-14  8:06       ` Christophe JAILLET
2024-04-13 22:08 ` Arınç ÜNAL via B4 Relay [this message]
2024-04-13 22:08   ` [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations Arınç ÜNAL
2024-04-13 22:08   ` Arınç ÜNAL via B4 Relay
2024-04-14  3:22   ` Daniel Golle
2024-04-14  3:22     ` Daniel Golle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-2-b08936df2770@arinc9.com \
    --to=devnull+arinc.unal.arinc9.com@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=arinc.unal@arinc9.com \
    --cc=bartel.eerdekens@constell8.be \
    --cc=daniel@makrotopia.org \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=edumazet@google.com \
    --cc=erkin.bozoglu@xeront.com \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mithat.guner@xeront.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.