All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Wahren <wahrenst@gmx.net>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Umang Jain <umang.jain@ideasonboard.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-staging@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH] staging: vchiq: Reformat Kconfig help texts
Date: Sun, 14 Apr 2024 16:45:15 +0200	[thread overview]
Message-ID: <20240414144515.14738-1-wahrenst@gmx.net> (raw)

The lines in the VCHIQ Kconfig help texts are too long, which makes
it hard to read the menuconfig. So shorten them to restore the
readability.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/staging/vc04_services/Kconfig | 33 +++++++++++++++------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/vc04_services/Kconfig b/drivers/staging/vc04_services/Kconfig
index 31e58c9d1a11..982445dd317b 100644
--- a/drivers/staging/vc04_services/Kconfig
+++ b/drivers/staging/vc04_services/Kconfig
@@ -16,27 +16,30 @@ config BCM2835_VCHIQ
 	depends on HAS_DMA
 	imply VCHIQ_CDEV
 	help
-		Broadcom BCM2835 and similar SoCs have a VPU called VideoCore. This config
-		enables the VCHIQ driver, which implements a messaging interface between
-		the kernel and the firmware running on VideoCore. Other drivers use this
-		interface to communicate to the VPU. More specifically, the VCHIQ driver is
-		used by audio/video and camera drivers as well as for implementing MMAL
-		API, which is in turn used by several multimedia services on the BCM2835
-		family of SoCs.
-		Defaults to Y when the Broadcom Videocore services are included in
-		the build, N otherwise.
+		Broadcom BCM2835 and similar SoCs have a VPU called VideoCore.
+		This config enables the VCHIQ driver, which implements a
+		messaging interface between the kernel and the firmware running
+		on VideoCore. Other drivers use this interface to communicate to
+		the VPU. More specifically, the VCHIQ driver is used by
+		audio/video and camera drivers as well as for implementing MMAL
+		API, which is in turn used by several multimedia services on the
+		BCM2835 family of SoCs.
+		Defaults to Y when the Broadcom Videocore services are included
+		in the build, N otherwise.

 if BCM2835_VCHIQ

 config VCHIQ_CDEV
 	bool "VCHIQ Character Driver"
 	help
-		Enable the creation of VCHIQ character driver. The cdev exposes ioctls used
-		by userspace libraries and testing tools to interact with VideoCore, via
-		the VCHIQ core driver (Check BCM2835_VCHIQ for more info).
-		This can be set to 'N' if the VideoCore communication is not needed by
-		userspace but only by other kernel modules (like bcm2835-audio).  If not
-		sure, set this to 'Y'.
+		Enable the creation of VCHIQ character driver. The cdev exposes
+		ioctls used by userspace libraries and testing tools to interact
+		with VideoCore, via the VCHIQ core driver (Check BCM2835_VCHIQ
+		for more info).
+		This can be set to 'N' if the VideoCore communication is not
+		needed by userspace but only by other kernel modules
+		(like bcm2835-audio).
+		If not sure, set this to 'Y'.

 endif

--
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <wahrenst@gmx.net>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Umang Jain <umang.jain@ideasonboard.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-staging@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH] staging: vchiq: Reformat Kconfig help texts
Date: Sun, 14 Apr 2024 16:45:15 +0200	[thread overview]
Message-ID: <20240414144515.14738-1-wahrenst@gmx.net> (raw)

The lines in the VCHIQ Kconfig help texts are too long, which makes
it hard to read the menuconfig. So shorten them to restore the
readability.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/staging/vc04_services/Kconfig | 33 +++++++++++++++------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/vc04_services/Kconfig b/drivers/staging/vc04_services/Kconfig
index 31e58c9d1a11..982445dd317b 100644
--- a/drivers/staging/vc04_services/Kconfig
+++ b/drivers/staging/vc04_services/Kconfig
@@ -16,27 +16,30 @@ config BCM2835_VCHIQ
 	depends on HAS_DMA
 	imply VCHIQ_CDEV
 	help
-		Broadcom BCM2835 and similar SoCs have a VPU called VideoCore. This config
-		enables the VCHIQ driver, which implements a messaging interface between
-		the kernel and the firmware running on VideoCore. Other drivers use this
-		interface to communicate to the VPU. More specifically, the VCHIQ driver is
-		used by audio/video and camera drivers as well as for implementing MMAL
-		API, which is in turn used by several multimedia services on the BCM2835
-		family of SoCs.
-		Defaults to Y when the Broadcom Videocore services are included in
-		the build, N otherwise.
+		Broadcom BCM2835 and similar SoCs have a VPU called VideoCore.
+		This config enables the VCHIQ driver, which implements a
+		messaging interface between the kernel and the firmware running
+		on VideoCore. Other drivers use this interface to communicate to
+		the VPU. More specifically, the VCHIQ driver is used by
+		audio/video and camera drivers as well as for implementing MMAL
+		API, which is in turn used by several multimedia services on the
+		BCM2835 family of SoCs.
+		Defaults to Y when the Broadcom Videocore services are included
+		in the build, N otherwise.

 if BCM2835_VCHIQ

 config VCHIQ_CDEV
 	bool "VCHIQ Character Driver"
 	help
-		Enable the creation of VCHIQ character driver. The cdev exposes ioctls used
-		by userspace libraries and testing tools to interact with VideoCore, via
-		the VCHIQ core driver (Check BCM2835_VCHIQ for more info).
-		This can be set to 'N' if the VideoCore communication is not needed by
-		userspace but only by other kernel modules (like bcm2835-audio).  If not
-		sure, set this to 'Y'.
+		Enable the creation of VCHIQ character driver. The cdev exposes
+		ioctls used by userspace libraries and testing tools to interact
+		with VideoCore, via the VCHIQ core driver (Check BCM2835_VCHIQ
+		for more info).
+		This can be set to 'N' if the VideoCore communication is not
+		needed by userspace but only by other kernel modules
+		(like bcm2835-audio).
+		If not sure, set this to 'Y'.

 endif

--
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2024-04-14 14:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-14 14:45 Stefan Wahren [this message]
2024-04-14 14:45 ` [PATCH] staging: vchiq: Reformat Kconfig help texts Stefan Wahren
2024-04-14 16:07 ` Laurent Pinchart
2024-04-14 16:07   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240414144515.14738-1-wahrenst@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=florian.fainelli@broadcom.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=umang.jain@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.