From: Frank Li <Frank.Li@nxp.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com> Cc: devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Frank Li <Frank.Li@nxp.com> Subject: [PATCH 07/10] arm64: dts: imx8qm-mek: add flexcan support Date: Mon, 15 Apr 2024 15:46:43 -0400 [thread overview] Message-ID: <20240415-dts_8qm_audio-v1-7-2976c35a0c52@nxp.com> (raw) In-Reply-To: <20240415-dts_8qm_audio-v1-0-2976c35a0c52@nxp.com> Add flexcan[1,2,3] support for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 80 ++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 4b87e13923328..94a4195d92320 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -40,6 +40,44 @@ reg_usdhc2_vmmc: usdhc2-vmmc { enable-active-high; }; + reg_can01_en: regulator-can01-gen { + compatible = "regulator-fixed"; + regulator-name = "can01-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_en: regulator-can2-gen { + compatible = "regulator-fixed"; + regulator-name = "can2-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can01_stby: regulator-can01-stby { + compatible = "regulator-fixed"; + regulator-name = "can01-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can01_en>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + regulator-name = "can2-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can2_en>; + }; + reg_vref_1v8: regulator-adc-vref { compatible = "regulator-fixed"; regulator-name = "vref_1v8"; @@ -242,6 +280,27 @@ &cm41_intmux { status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can01_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can01_stby>; + status = "okay"; +}; + +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + &lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; @@ -434,6 +493,27 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 >; }; + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21 + IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x21 + >; + }; + + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x21 + IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x21 + >; + }; + + pinctrl_flexcan3: flexcan3grp { + fsl,pins = < + IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x21 + IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x21 + >; + }; + pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020 -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.Li@nxp.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com> Cc: devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Frank Li <Frank.Li@nxp.com> Subject: [PATCH 07/10] arm64: dts: imx8qm-mek: add flexcan support Date: Mon, 15 Apr 2024 15:46:43 -0400 [thread overview] Message-ID: <20240415-dts_8qm_audio-v1-7-2976c35a0c52@nxp.com> (raw) In-Reply-To: <20240415-dts_8qm_audio-v1-0-2976c35a0c52@nxp.com> Add flexcan[1,2,3] support for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 80 ++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 4b87e13923328..94a4195d92320 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -40,6 +40,44 @@ reg_usdhc2_vmmc: usdhc2-vmmc { enable-active-high; }; + reg_can01_en: regulator-can01-gen { + compatible = "regulator-fixed"; + regulator-name = "can01-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_en: regulator-can2-gen { + compatible = "regulator-fixed"; + regulator-name = "can2-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can01_stby: regulator-can01-stby { + compatible = "regulator-fixed"; + regulator-name = "can01-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can01_en>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + regulator-name = "can2-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can2_en>; + }; + reg_vref_1v8: regulator-adc-vref { compatible = "regulator-fixed"; regulator-name = "vref_1v8"; @@ -242,6 +280,27 @@ &cm41_intmux { status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can01_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can01_stby>; + status = "okay"; +}; + +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + &lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; @@ -434,6 +493,27 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 >; }; + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21 + IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x21 + >; + }; + + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x21 + IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x21 + >; + }; + + pinctrl_flexcan3: flexcan3grp { + fsl,pins = < + IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x21 + IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x21 + >; + }; + pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020 -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-15 19:47 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-15 19:46 [PATCH 00/10] arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` [PATCH 01/10] arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>; Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` [PATCH 02/10] arm64: dts: imx8qm-ss-audio: add audio nodes Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-16 6:50 ` Francesco Dolcini 2024-04-16 6:50 ` Francesco Dolcini 2024-04-17 16:01 ` Frank Li 2024-04-17 16:01 ` Frank Li 2024-04-17 17:20 ` Francesco Dolcini 2024-04-17 17:20 ` Francesco Dolcini 2024-04-17 18:29 ` Frank Li 2024-04-17 18:29 ` Frank Li 2024-04-15 19:46 ` [PATCH 03/10] arm64: dts: imx8qm-mek: add sai and wm8960 support Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` [PATCH 04/10] arm64: dts: imx8x: add cm41 subsystem dtsi Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` [PATCH 05/10] arm64: dts: imx8qm-mek: add i2c0 and children devices Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` [PATCH 06/10] arm64: dts: imx8qm-mek: add cm41_i2c " Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` Frank Li [this message] 2024-04-15 19:46 ` [PATCH 07/10] arm64: dts: imx8qm-mek: add flexcan support Frank Li 2024-04-15 19:46 ` [PATCH 08/10] arm64: dts: imx8qm-mek: add lsio mu5 and mu6 Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` [PATCH 09/10] arm64: dts: imx8qm: add ocopt and fec_mac[0,1] Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-15 19:46 ` [PATCH 10/10] arm64: dts: imx8qm-mek: add fec2 support Frank Li 2024-04-15 19:46 ` Frank Li 2024-04-16 6:52 ` Francesco Dolcini 2024-04-16 6:52 ` Francesco Dolcini
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240415-dts_8qm_audio-v1-7-2976c35a0c52@nxp.com \ --to=frank.li@nxp.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=imx@lists.linux.dev \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.