From: Udit Kumar <u-kumar1@ti.com> To: <nm@ti.com>, <vigneshr@ti.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <francesco@dolcini.it> Cc: <kristo@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>, <linux-kernel@vger.kernel.org>, Udit Kumar <u-kumar1@ti.com> Subject: [PATCH v2 2/2] arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type Date: Mon, 15 Apr 2024 15:26:05 +0530 [thread overview] Message-ID: <20240415095605.3547933-3-u-kumar1@ti.com> (raw) In-Reply-To: <20240415095605.3547933-1-u-kumar1@ti.com> Along fixing wkup UART RTS and TX pins as OUTPUT instead of INPUT updating J784S4 macro for pin mux instead of J721S2. Fixes: 45299dd1991b ("arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts") Fixes: 08ae12b63750 ("arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom") Signed-off-by: Udit Kumar <u-kumar1@ti.com> --- arch/arm64/boot/dts/ti/k3-am69-sk.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 50de2a448a3a..d88651c297a2 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -517,18 +517,18 @@ J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7) wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ - J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ - J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_UART0_CTSn */ + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_UART0_RTSn */ + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ >; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ - J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ >; }; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Udit Kumar <u-kumar1@ti.com> To: <nm@ti.com>, <vigneshr@ti.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <francesco@dolcini.it> Cc: <kristo@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>, <linux-kernel@vger.kernel.org>, Udit Kumar <u-kumar1@ti.com> Subject: [PATCH v2 2/2] arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type Date: Mon, 15 Apr 2024 15:26:05 +0530 [thread overview] Message-ID: <20240415095605.3547933-3-u-kumar1@ti.com> (raw) In-Reply-To: <20240415095605.3547933-1-u-kumar1@ti.com> Along fixing wkup UART RTS and TX pins as OUTPUT instead of INPUT updating J784S4 macro for pin mux instead of J721S2. Fixes: 45299dd1991b ("arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts") Fixes: 08ae12b63750 ("arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom") Signed-off-by: Udit Kumar <u-kumar1@ti.com> --- arch/arm64/boot/dts/ti/k3-am69-sk.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 50de2a448a3a..d88651c297a2 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -517,18 +517,18 @@ J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7) wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ - J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ - J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_UART0_CTSn */ + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_UART0_RTSn */ + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ >; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ - J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ >; }; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-15 9:56 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-15 9:56 [PATCH v2 0/2] Fix UART pin type and macro type Udit Kumar 2024-04-15 9:56 ` Udit Kumar 2024-04-15 9:56 ` [PATCH v2 1/2] arm64: dts: ti: k3-j784s4-evm: " Udit Kumar 2024-04-15 9:56 ` Udit Kumar 2024-04-15 11:02 ` Francesco Dolcini 2024-04-15 11:02 ` Francesco Dolcini 2024-04-15 9:56 ` Udit Kumar [this message] 2024-04-15 9:56 ` [PATCH v2 2/2] arm64: dts: ti: k3-am69-sk: " Udit Kumar 2024-04-15 11:03 ` Francesco Dolcini 2024-04-15 11:03 ` Francesco Dolcini 2024-04-26 22:39 ` [PATCH v2 0/2] " Nishanth Menon 2024-04-26 22:39 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240415095605.3547933-3-u-kumar1@ti.com \ --to=u-kumar1@ti.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=francesco@dolcini.it \ --cc=kristo@kernel.org \ --cc=krzk+dt@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh@kernel.org \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.