From: Christopher Obbard <chris.obbard@collabora.com> To: linux-kernel@vger.kernel.org Cc: Daniel Scally <dan.scally@ideasonboard.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, kernel@collabora.com, Christopher Obbard <chris.obbard@collabora.com>, Conor Dooley <conor+dt@kernel.org>, Fabio Estevam <festevam@gmail.com>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Pengutronix Kernel Team <kernel@pengutronix.de>, Rob Herring <robh@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org Subject: [PATCH v1 1/1] arm64: dts: imx8mp-debix-model-a: Add HDMI output support Date: Mon, 15 Apr 2024 12:41:27 +0100 [thread overview] Message-ID: <20240415114135.25473-2-chris.obbard@collabora.com> (raw) In-Reply-To: <20240415114135.25473-1-chris.obbard@collabora.com> Enable the HDMI output on the Debix Model A SBC, using the HDMI encoder present in the i.MX8MP SoC. Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> --- .../dts/freescale/imx8mp-debix-model-a.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 2c19766ebf09..29529c2ecac9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -20,6 +20,18 @@ chosen { stdout-path = &uart2; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -94,6 +106,28 @@ ethphy0: ethernet-phy@0 { /* RTL8211E */ }; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -241,6 +275,10 @@ &i2c6 { status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -358,6 +396,15 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Christopher Obbard <chris.obbard@collabora.com> To: linux-kernel@vger.kernel.org Cc: Daniel Scally <dan.scally@ideasonboard.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, kernel@collabora.com, Christopher Obbard <chris.obbard@collabora.com>, Conor Dooley <conor+dt@kernel.org>, Fabio Estevam <festevam@gmail.com>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Pengutronix Kernel Team <kernel@pengutronix.de>, Rob Herring <robh@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org Subject: [PATCH v1 1/1] arm64: dts: imx8mp-debix-model-a: Add HDMI output support Date: Mon, 15 Apr 2024 12:41:27 +0100 [thread overview] Message-ID: <20240415114135.25473-2-chris.obbard@collabora.com> (raw) In-Reply-To: <20240415114135.25473-1-chris.obbard@collabora.com> Enable the HDMI output on the Debix Model A SBC, using the HDMI encoder present in the i.MX8MP SoC. Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> --- .../dts/freescale/imx8mp-debix-model-a.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 2c19766ebf09..29529c2ecac9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -20,6 +20,18 @@ chosen { stdout-path = &uart2; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -94,6 +106,28 @@ ethphy0: ethernet-phy@0 { /* RTL8211E */ }; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -241,6 +275,10 @@ &i2c6 { status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -358,6 +396,15 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 -- 2.43.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-15 11:41 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-15 11:41 [PATCH v1 0/1] Enable HDMI output support on the Debix Model A SBC Christopher Obbard 2024-04-15 11:41 ` Christopher Obbard 2024-04-15 11:41 ` Christopher Obbard [this message] 2024-04-15 11:41 ` [PATCH v1 1/1] arm64: dts: imx8mp-debix-model-a: Add HDMI output support Christopher Obbard 2024-04-15 15:08 ` Kieran Bingham 2024-04-15 15:08 ` Kieran Bingham 2024-04-15 16:35 ` Laurent Pinchart 2024-04-15 16:35 ` Laurent Pinchart 2024-04-15 17:07 ` Christopher Obbard 2024-04-15 17:07 ` Christopher Obbard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240415114135.25473-2-chris.obbard@collabora.com \ --to=chris.obbard@collabora.com \ --cc=conor+dt@kernel.org \ --cc=dan.scally@ideasonboard.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=imx@lists.linux.dev \ --cc=kernel@collabora.com \ --cc=kernel@pengutronix.de \ --cc=krzk+dt@kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.