[PATCH v2 1/5] media: ov2680: Stop sending more data then requested

[Hans de Goede <hdegoede@redhat.com>]

There is no reason to send OV2680_END_MARGIN extra columns on top of
the mode width and the same for sending extra lines over the mode height.

This sending of extra lines/columns was inherited from the atomisp
ov2680 driver, it is unclear why this was done and this complicates
adding V4L2_CID_VBLANK support, so remove it.

Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/media/i2c/ov2680.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index a857763c7984..4429b569ded0 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -86,9 +86,6 @@
 #define OV2680_PIXELS_PER_LINE			1704
 #define OV2680_LINES_PER_FRAME			1294
 
-/* If possible send 16 extra rows / lines to the ISP as padding */
-#define OV2680_END_MARGIN			16
-
 /* Max exposure time is VTS - 8 */
 #define OV2680_INTEGRATION_TIME_MARGIN		8
 
@@ -359,11 +356,9 @@ static void ov2680_calc_mode(struct ov2680_dev *sensor)
 	sensor->mode.v_start = (sensor->mode.crop.top +
 				(sensor->mode.crop.height - height) / 2) & ~1;
 	sensor->mode.h_end =
-		min(sensor->mode.h_start + width + OV2680_END_MARGIN - 1,
-		    OV2680_NATIVE_WIDTH - 1);
+		min(sensor->mode.h_start + width - 1, OV2680_NATIVE_WIDTH - 1);
 	sensor->mode.v_end =
-		min(sensor->mode.v_start + height + OV2680_END_MARGIN - 1,
-		    OV2680_NATIVE_HEIGHT - 1);
+		min(sensor->mode.v_start + height - 1, OV2680_NATIVE_HEIGHT - 1);
 	sensor->mode.h_output_size = orig_width;
 	sensor->mode.v_output_size = orig_height;
 	sensor->mode.hts = OV2680_PIXELS_PER_LINE;
-- 
2.44.0