From: Cristian Marussi <cristian.marussi@arm.com> To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org Cc: sudeep.holla@arm.com, james.quinlan@broadcom.com, f.fainelli@gmail.com, vincent.guittot@linaro.org, peng.fan@oss.nxp.com, michal.simek@amd.com, quic_sibis@quicinc.com, quic_nkela@quicinc.com, souvik.chakravarty@arm.com, mturquette@baylibre.com, sboyd@kernel.org, Cristian Marussi <cristian.marussi@arm.com> Subject: [PATCH v3 5/5] clk: scmi: Add support for get/set duty_cycle operations Date: Mon, 15 Apr 2024 17:36:49 +0100 [thread overview] Message-ID: <20240415163649.895268-6-cristian.marussi@arm.com> (raw) In-Reply-To: <20240415163649.895268-1-cristian.marussi@arm.com> Provide the CLK framework callbacks related to get/set clock duty cycle if the related SCMI clock supports OEM extended configurations. CC: Michael Turquette <mturquette@baylibre.com> CC: Stephen Boyd <sboyd@kernel.org> CC: linux-clk@vger.kernel.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> --- drivers/clk/clk-scmi.c | 49 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c index ce0f26ee632f..d86a02563f6c 100644 --- a/drivers/clk/clk-scmi.c +++ b/drivers/clk/clk-scmi.c @@ -22,6 +22,7 @@ enum scmi_clk_feats { SCMI_CLK_STATE_CTRL_SUPPORTED, SCMI_CLK_RATE_CTRL_SUPPORTED, SCMI_CLK_PARENT_CTRL_SUPPORTED, + SCMI_CLK_DUTY_CYCLE_SUPPORTED, SCMI_CLK_FEATS_COUNT }; @@ -169,6 +170,45 @@ static int scmi_clk_atomic_is_enabled(struct clk_hw *hw) return !!enabled; } +static int scmi_clk_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty) +{ + int ret; + u32 val; + struct scmi_clk *clk = to_scmi_clk(hw); + + ret = scmi_proto_clk_ops->config_oem_get(clk->ph, clk->id, + SCMI_CLOCK_CFG_DUTY_CYCLE, + &val, NULL, false); + if (!ret) { + duty->num = val; + duty->den = 100; + } else { + dev_warn(clk->dev, + "Failed to get duty cycle for clock ID %d\n", clk->id); + } + + return ret; +} + +static int scmi_clk_set_duty_cycle(struct clk_hw *hw, struct clk_duty *duty) +{ + int ret; + u32 val; + struct scmi_clk *clk = to_scmi_clk(hw); + + /* SCMI OEM Duty Cycle is expressed as a percentage */ + val = (duty->num * 100) / duty->den; + ret = scmi_proto_clk_ops->config_oem_set(clk->ph, clk->id, + SCMI_CLOCK_CFG_DUTY_CYCLE, + val, false); + if (ret) + dev_warn(clk->dev, + "Failed to set duty cycle(%u/%u) for clock ID %d\n", + duty->num, duty->den, clk->id); + + return ret; +} + static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk, const struct clk_ops *scmi_ops) { @@ -258,6 +298,12 @@ scmi_clk_ops_alloc(struct device *dev, unsigned long feats_key) if (feats_key & BIT(SCMI_CLK_PARENT_CTRL_SUPPORTED)) ops->set_parent = scmi_clk_set_parent; + /* Duty cycle */ + if (feats_key & BIT(SCMI_CLK_DUTY_CYCLE_SUPPORTED)) { + ops->get_duty_cycle = scmi_clk_get_duty_cycle; + ops->set_duty_cycle = scmi_clk_set_duty_cycle; + } + return ops; } @@ -312,6 +358,9 @@ scmi_clk_ops_select(struct scmi_clk *sclk, bool atomic_capable, if (!ci->parent_ctrl_forbidden) feats_key |= BIT(SCMI_CLK_PARENT_CTRL_SUPPORTED); + if (ci->extended_config) + feats_key |= BIT(SCMI_CLK_DUTY_CYCLE_SUPPORTED); + if (WARN_ON(feats_key >= db_size)) return NULL; -- 2.44.0
WARNING: multiple messages have this Message-ID (diff)
From: Cristian Marussi <cristian.marussi@arm.com> To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org Cc: sudeep.holla@arm.com, james.quinlan@broadcom.com, f.fainelli@gmail.com, vincent.guittot@linaro.org, peng.fan@oss.nxp.com, michal.simek@amd.com, quic_sibis@quicinc.com, quic_nkela@quicinc.com, souvik.chakravarty@arm.com, mturquette@baylibre.com, sboyd@kernel.org, Cristian Marussi <cristian.marussi@arm.com> Subject: [PATCH v3 5/5] clk: scmi: Add support for get/set duty_cycle operations Date: Mon, 15 Apr 2024 17:36:49 +0100 [thread overview] Message-ID: <20240415163649.895268-6-cristian.marussi@arm.com> (raw) In-Reply-To: <20240415163649.895268-1-cristian.marussi@arm.com> Provide the CLK framework callbacks related to get/set clock duty cycle if the related SCMI clock supports OEM extended configurations. CC: Michael Turquette <mturquette@baylibre.com> CC: Stephen Boyd <sboyd@kernel.org> CC: linux-clk@vger.kernel.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> --- drivers/clk/clk-scmi.c | 49 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c index ce0f26ee632f..d86a02563f6c 100644 --- a/drivers/clk/clk-scmi.c +++ b/drivers/clk/clk-scmi.c @@ -22,6 +22,7 @@ enum scmi_clk_feats { SCMI_CLK_STATE_CTRL_SUPPORTED, SCMI_CLK_RATE_CTRL_SUPPORTED, SCMI_CLK_PARENT_CTRL_SUPPORTED, + SCMI_CLK_DUTY_CYCLE_SUPPORTED, SCMI_CLK_FEATS_COUNT }; @@ -169,6 +170,45 @@ static int scmi_clk_atomic_is_enabled(struct clk_hw *hw) return !!enabled; } +static int scmi_clk_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty) +{ + int ret; + u32 val; + struct scmi_clk *clk = to_scmi_clk(hw); + + ret = scmi_proto_clk_ops->config_oem_get(clk->ph, clk->id, + SCMI_CLOCK_CFG_DUTY_CYCLE, + &val, NULL, false); + if (!ret) { + duty->num = val; + duty->den = 100; + } else { + dev_warn(clk->dev, + "Failed to get duty cycle for clock ID %d\n", clk->id); + } + + return ret; +} + +static int scmi_clk_set_duty_cycle(struct clk_hw *hw, struct clk_duty *duty) +{ + int ret; + u32 val; + struct scmi_clk *clk = to_scmi_clk(hw); + + /* SCMI OEM Duty Cycle is expressed as a percentage */ + val = (duty->num * 100) / duty->den; + ret = scmi_proto_clk_ops->config_oem_set(clk->ph, clk->id, + SCMI_CLOCK_CFG_DUTY_CYCLE, + val, false); + if (ret) + dev_warn(clk->dev, + "Failed to set duty cycle(%u/%u) for clock ID %d\n", + duty->num, duty->den, clk->id); + + return ret; +} + static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk, const struct clk_ops *scmi_ops) { @@ -258,6 +298,12 @@ scmi_clk_ops_alloc(struct device *dev, unsigned long feats_key) if (feats_key & BIT(SCMI_CLK_PARENT_CTRL_SUPPORTED)) ops->set_parent = scmi_clk_set_parent; + /* Duty cycle */ + if (feats_key & BIT(SCMI_CLK_DUTY_CYCLE_SUPPORTED)) { + ops->get_duty_cycle = scmi_clk_get_duty_cycle; + ops->set_duty_cycle = scmi_clk_set_duty_cycle; + } + return ops; } @@ -312,6 +358,9 @@ scmi_clk_ops_select(struct scmi_clk *sclk, bool atomic_capable, if (!ci->parent_ctrl_forbidden) feats_key |= BIT(SCMI_CLK_PARENT_CTRL_SUPPORTED); + if (ci->extended_config) + feats_key |= BIT(SCMI_CLK_DUTY_CYCLE_SUPPORTED); + if (WARN_ON(feats_key >= db_size)) return NULL; -- 2.44.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-15 16:37 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-15 16:36 [PATCH v3 0/5] Rework SCMI Clock driver clk_ops setup procedure Cristian Marussi 2024-04-15 16:36 ` Cristian Marussi 2024-04-15 16:36 ` [PATCH v3 1/5] clk: scmi: Allocate CLK operations dynamically Cristian Marussi 2024-04-15 16:36 ` Cristian Marussi 2024-04-22 19:04 ` Stephen Boyd 2024-04-22 19:04 ` Stephen Boyd 2024-04-15 16:36 ` [PATCH v3 2/5] clk: scmi: Add support for state control restricted clocks Cristian Marussi 2024-04-15 16:36 ` Cristian Marussi 2024-04-22 19:04 ` Stephen Boyd 2024-04-22 19:04 ` Stephen Boyd 2024-04-15 16:36 ` [PATCH v3 3/5] clk: scmi: Add support for rate change " Cristian Marussi 2024-04-15 16:36 ` Cristian Marussi 2024-04-22 19:04 ` Stephen Boyd 2024-04-22 19:04 ` Stephen Boyd 2024-04-15 16:36 ` [PATCH v3 4/5] clk: scmi: Add support for re-parenting " Cristian Marussi 2024-04-15 16:36 ` Cristian Marussi 2024-04-22 19:04 ` Stephen Boyd 2024-04-22 19:04 ` Stephen Boyd 2024-04-15 16:36 ` Cristian Marussi [this message] 2024-04-15 16:36 ` [PATCH v3 5/5] clk: scmi: Add support for get/set duty_cycle operations Cristian Marussi 2024-04-22 19:03 ` Stephen Boyd 2024-04-22 19:03 ` Stephen Boyd 2024-04-20 2:08 ` [PATCH v3 0/5] Rework SCMI Clock driver clk_ops setup procedure Stephen Boyd 2024-04-20 2:08 ` Stephen Boyd 2024-04-21 9:31 ` Cristian Marussi 2024-04-21 9:31 ` Cristian Marussi 2024-04-22 8:06 ` Sudeep Holla 2024-04-22 8:06 ` Sudeep Holla 2024-04-22 19:00 ` Stephen Boyd 2024-04-22 19:00 ` Stephen Boyd
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240415163649.895268-6-cristian.marussi@arm.com \ --to=cristian.marussi@arm.com \ --cc=f.fainelli@gmail.com \ --cc=james.quinlan@broadcom.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=michal.simek@amd.com \ --cc=mturquette@baylibre.com \ --cc=peng.fan@oss.nxp.com \ --cc=quic_nkela@quicinc.com \ --cc=quic_sibis@quicinc.com \ --cc=sboyd@kernel.org \ --cc=souvik.chakravarty@arm.com \ --cc=sudeep.holla@arm.com \ --cc=vincent.guittot@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.