From: Stefan Eichenberger <eichest@gmail.com> To: nick@shmanahar.org, dmitry.torokhov@gmail.com, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com, claudiu.beznea@tuxon.dev, linus.walleij@linaro.org Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Eichenberger <stefan.eichenberger@toradex.com> Subject: [PATCH v4 2/4] Input: atmel_mxt_ts - move calls to register the input device to separate function Date: Wed, 17 Apr 2024 11:05:25 +0200 [thread overview] Message-ID: <20240417090527.15357-3-eichest@gmail.com> (raw) In-Reply-To: <20240417090527.15357-1-eichest@gmail.com> From: Stefan Eichenberger <stefan.eichenberger@toradex.com> The calls to register the input device are moved to a separate function so that we can call it without having to confiugre the device. This is necessary if we want to power on the device only when it is opened. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> --- drivers/input/touchscreen/atmel_mxt_ts.c | 34 +++++++++++++++++------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 52867ce3b9b6..7c807d1f1f9b 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -2277,6 +2277,28 @@ static void mxt_config_cb(const struct firmware *cfg, void *ctx) release_firmware(cfg); } +static void mxt_debug_init(struct mxt_data *data); + +static int mxt_device_register(struct mxt_data *data) +{ + int error; + + /* If input device is not already registered */ + if (!data->input_dev) { + if (data->multitouch) { + error = mxt_initialize_input_device(data); + if (error) + return error; + } else { + dev_warn(&data->client->dev, "No touch object detected\n"); + } + + mxt_debug_init(data); + } + + return 0; +} + static int mxt_initialize(struct mxt_data *data) { struct i2c_client *client = data->client; @@ -2831,15 +2853,9 @@ static int mxt_configure_objects(struct mxt_data *data, dev_warn(dev, "Error %d updating config\n", error); } - if (data->multitouch) { - error = mxt_initialize_input_device(data); - if (error) - return error; - } else { - dev_warn(dev, "No touch object detected\n"); - } - - mxt_debug_init(data); + error = mxt_device_register(data); + if (error) + return error; return 0; } -- 2.40.1
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Eichenberger <eichest@gmail.com> To: nick@shmanahar.org, dmitry.torokhov@gmail.com, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com, claudiu.beznea@tuxon.dev, linus.walleij@linaro.org Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Eichenberger <stefan.eichenberger@toradex.com> Subject: [PATCH v4 2/4] Input: atmel_mxt_ts - move calls to register the input device to separate function Date: Wed, 17 Apr 2024 11:05:25 +0200 [thread overview] Message-ID: <20240417090527.15357-3-eichest@gmail.com> (raw) In-Reply-To: <20240417090527.15357-1-eichest@gmail.com> From: Stefan Eichenberger <stefan.eichenberger@toradex.com> The calls to register the input device are moved to a separate function so that we can call it without having to confiugre the device. This is necessary if we want to power on the device only when it is opened. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> --- drivers/input/touchscreen/atmel_mxt_ts.c | 34 +++++++++++++++++------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 52867ce3b9b6..7c807d1f1f9b 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -2277,6 +2277,28 @@ static void mxt_config_cb(const struct firmware *cfg, void *ctx) release_firmware(cfg); } +static void mxt_debug_init(struct mxt_data *data); + +static int mxt_device_register(struct mxt_data *data) +{ + int error; + + /* If input device is not already registered */ + if (!data->input_dev) { + if (data->multitouch) { + error = mxt_initialize_input_device(data); + if (error) + return error; + } else { + dev_warn(&data->client->dev, "No touch object detected\n"); + } + + mxt_debug_init(data); + } + + return 0; +} + static int mxt_initialize(struct mxt_data *data) { struct i2c_client *client = data->client; @@ -2831,15 +2853,9 @@ static int mxt_configure_objects(struct mxt_data *data, dev_warn(dev, "Error %d updating config\n", error); } - if (data->multitouch) { - error = mxt_initialize_input_device(data); - if (error) - return error; - } else { - dev_warn(dev, "No touch object detected\n"); - } - - mxt_debug_init(data); + error = mxt_device_register(data); + if (error) + return error; return 0; } -- 2.40.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-17 9:05 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-17 9:05 [PATCH v4 0/4] Add a property to turn off the max touch controller if not used Stefan Eichenberger 2024-04-17 9:05 ` Stefan Eichenberger 2024-04-17 9:05 ` [PATCH v4 1/4] Input: atmel_mxt_ts - add power off and power on functions Stefan Eichenberger 2024-04-17 9:05 ` Stefan Eichenberger 2024-04-17 9:05 ` Stefan Eichenberger [this message] 2024-04-17 9:05 ` [PATCH v4 2/4] Input: atmel_mxt_ts - move calls to register the input device to separate function Stefan Eichenberger 2024-04-17 9:05 ` [PATCH v4 3/4] dt-bindings: input: atmel,maxtouch: add poweroff-sleep property Stefan Eichenberger 2024-04-17 9:05 ` Stefan Eichenberger 2024-04-17 9:05 ` [PATCH v4 4/4] Input: atmel_mxt_ts - add support for poweroff-sleep Stefan Eichenberger 2024-04-17 9:05 ` Stefan Eichenberger 2024-04-17 11:12 ` [PATCH v4 0/4] Add a property to turn off the max touch controller if not used Joao Paulo Goncalves 2024-04-17 11:12 ` Joao Paulo Goncalves
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240417090527.15357-3-eichest@gmail.com \ --to=eichest@gmail.com \ --cc=alexandre.belloni@bootlin.com \ --cc=claudiu.beznea@tuxon.dev \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.torokhov@gmail.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nick@shmanahar.org \ --cc=nicolas.ferre@microchip.com \ --cc=robh@kernel.org \ --cc=stefan.eichenberger@toradex.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.