From: Frank Li <Frank.Li@nxp.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com> Cc: devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Frank Li <Frank.Li@nxp.com> Subject: [PATCH v2 10/10] arm64: dts: imx8qm-mek: add fec2 support Date: Thu, 18 Apr 2024 12:36:45 -0400 [thread overview] Message-ID: <20240418-dts_8qm_audio-v2-10-e40fe76b60a6@nxp.com> (raw) In-Reply-To: <20240418-dts_8qm_audio-v2-0-e40fe76b60a6@nxp.com> Add fec2 support. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 40 ++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index c8b24c46c30a4..09f2d3e76a3fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -40,6 +40,15 @@ reg_usdhc2_vmmc: usdhc2-vmmc { enable-active-high; }; + reg_fec2_supply: fec2_nvcc { + compatible = "regulator-fixed"; + regulator-name = "fec2_nvcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_can01_en: regulator-can01-gen { compatible = "regulator-fixed"; regulator-name = "can01-en"; @@ -382,6 +391,19 @@ ethphy1: ethernet-phy@1 { }; }; +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-txid"; + phy-handle = <ðphy1>; + phy-supply = <®_fec2_supply>; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + rx-internal-delay-ps = <2000>; + fsl,magic-packet; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -501,6 +523,24 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 >; }; + pinctrl_fec2: fec2grp { + fsl,pins = < + IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 + IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060 + IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060 + IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060 + IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060 + IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060 + IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060 + IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060 + IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060 + IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060 + IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060 + IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060 + IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060 + >; + }; + pinctrl_flexcan1: flexcan0grp { fsl,pins = < IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21 -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.Li@nxp.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com> Cc: devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Frank Li <Frank.Li@nxp.com> Subject: [PATCH v2 10/10] arm64: dts: imx8qm-mek: add fec2 support Date: Thu, 18 Apr 2024 12:36:45 -0400 [thread overview] Message-ID: <20240418-dts_8qm_audio-v2-10-e40fe76b60a6@nxp.com> (raw) In-Reply-To: <20240418-dts_8qm_audio-v2-0-e40fe76b60a6@nxp.com> Add fec2 support. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 40 ++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index c8b24c46c30a4..09f2d3e76a3fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -40,6 +40,15 @@ reg_usdhc2_vmmc: usdhc2-vmmc { enable-active-high; }; + reg_fec2_supply: fec2_nvcc { + compatible = "regulator-fixed"; + regulator-name = "fec2_nvcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_can01_en: regulator-can01-gen { compatible = "regulator-fixed"; regulator-name = "can01-en"; @@ -382,6 +391,19 @@ ethphy1: ethernet-phy@1 { }; }; +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-txid"; + phy-handle = <ðphy1>; + phy-supply = <®_fec2_supply>; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + rx-internal-delay-ps = <2000>; + fsl,magic-packet; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -501,6 +523,24 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 >; }; + pinctrl_fec2: fec2grp { + fsl,pins = < + IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 + IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060 + IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060 + IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060 + IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060 + IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060 + IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060 + IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060 + IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060 + IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060 + IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060 + IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060 + IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060 + >; + }; + pinctrl_flexcan1: flexcan0grp { fsl,pins = < IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21 -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-18 16:37 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-18 16:36 [PATCH v2 00/10] arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 01/10] arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>; Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 02/10] arm64: dts: imx8qm-ss-audio: add audio nodes Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 03/10] arm64: dts: imx8qm-mek: add sai and wm8960 support Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 04/10] arm64: dts: imx8x: add cm41 subsystem dtsi Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 05/10] arm64: dts: imx8qm-mek: add i2c0 and children devices Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 23:03 ` Fabio Estevam 2024-04-18 23:03 ` Fabio Estevam 2024-04-18 16:36 ` [PATCH v2 06/10] arm64: dts: imx8qm-mek: add cm41_i2c " Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 07/10] arm64: dts: imx8qm-mek: add flexcan support Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 08/10] arm64: dts: imx8qm-mek: add lsio mu5 and mu6 Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` [PATCH v2 09/10] arm64: dts: imx8qm: add ocopt and fec_mac[0,1] Frank Li 2024-04-18 16:36 ` Frank Li 2024-04-18 16:36 ` Frank Li [this message] 2024-04-18 16:36 ` [PATCH v2 10/10] arm64: dts: imx8qm-mek: add fec2 support Frank Li
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240418-dts_8qm_audio-v2-10-e40fe76b60a6@nxp.com \ --to=frank.li@nxp.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=imx@lists.linux.dev \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.