All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lance Yang <ioworker0@gmail.com>
To: akpm@linux-foundation.org
Cc: ryan.roberts@arm.com, david@redhat.com, 21cnbao@gmail.com,
	mhocko@suse.com, fengwei.yin@intel.com, zokeefe@google.com,
	shy828301@gmail.com, xiehuan09@gmail.com,
	wangkefeng.wang@huawei.com, songmuchun@bytedance.com,
	peterx@redhat.com, minchan@kernel.org, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, Lance Yang <ioworker0@gmail.com>
Subject: [PATCH v9 4/4] mm/madvise: optimize lazyfreeing with mTHP in madvise_free
Date: Thu, 18 Apr 2024 18:57:50 +0800	[thread overview]
Message-ID: <20240418105750.98866-5-ioworker0@gmail.com> (raw)
In-Reply-To: <20240418105750.98866-1-ioworker0@gmail.com>

This patch optimizes lazyfreeing with PTE-mapped mTHP[1]
(Inspired by David Hildenbrand[2]). We aim to avoid unnecessary folio
splitting if the large folio is fully mapped within the target range.

If a large folio is locked or shared, or if we fail to split it, we just
leave it in place and advance to the next PTE in the range. But note that
the behavior is changed; previously, any failure of this sort would cause
the entire operation to give up. As large folios become more common,
sticking to the old way could result in wasted opportunities.

On an Intel I5 CPU, lazyfreeing a 1GiB VMA backed by PTE-mapped folios of
the same size results in the following runtimes for madvise(MADV_FREE) in
seconds (shorter is better):

Folio Size |   Old    |   New    | Change
------------------------------------------
      4KiB | 0.590251 | 0.590259 |    0%
     16KiB | 2.990447 | 0.185655 |  -94%
     32KiB | 2.547831 | 0.104870 |  -95%
     64KiB | 2.457796 | 0.052812 |  -97%
    128KiB | 2.281034 | 0.032777 |  -99%
    256KiB | 2.230387 | 0.017496 |  -99%
    512KiB | 2.189106 | 0.010781 |  -99%
   1024KiB | 2.183949 | 0.007753 |  -99%
   2048KiB | 0.002799 | 0.002804 |    0%

[1] https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com
[2] https://lore.kernel.org/linux-mm/20240214204435.167852-1-david@redhat.com

Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Lance Yang <ioworker0@gmail.com>
---
 mm/madvise.c | 85 +++++++++++++++++++++++++++-------------------------
 1 file changed, 44 insertions(+), 41 deletions(-)

diff --git a/mm/madvise.c b/mm/madvise.c
index 4597a3568e7e..375ab3234603 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -643,6 +643,7 @@ static int madvise_free_pte_range(pmd_t *pmd, unsigned long addr,
 				unsigned long end, struct mm_walk *walk)
 
 {
+	const cydp_t cydp_flags = CYDP_CLEAR_YOUNG | CYDP_CLEAR_DIRTY;
 	struct mmu_gather *tlb = walk->private;
 	struct mm_struct *mm = tlb->mm;
 	struct vm_area_struct *vma = walk->vma;
@@ -697,44 +698,57 @@ static int madvise_free_pte_range(pmd_t *pmd, unsigned long addr,
 			continue;
 
 		/*
-		 * If pmd isn't transhuge but the folio is large and
-		 * is owned by only this process, split it and
-		 * deactivate all pages.
+		 * If we encounter a large folio, only split it if it is not
+		 * fully mapped within the range we are operating on. Otherwise
+		 * leave it as is so that it can be marked as lazyfree. If we
+		 * fail to split a folio, leave it in place and advance to the
+		 * next pte in the range.
 		 */
 		if (folio_test_large(folio)) {
-			int err;
+			bool any_young, any_dirty;
 
-			if (folio_likely_mapped_shared(folio))
-				break;
-			if (!folio_trylock(folio))
-				break;
-			folio_get(folio);
-			arch_leave_lazy_mmu_mode();
-			pte_unmap_unlock(start_pte, ptl);
-			start_pte = NULL;
-			err = split_folio(folio);
-			folio_unlock(folio);
-			folio_put(folio);
-			if (err)
-				break;
-			start_pte = pte =
-				pte_offset_map_lock(mm, pmd, addr, &ptl);
-			if (!start_pte)
-				break;
-			arch_enter_lazy_mmu_mode();
-			pte--;
-			addr -= PAGE_SIZE;
-			continue;
+			nr = madvise_folio_pte_batch(addr, end, folio, pte,
+						     ptent, &any_young, NULL);
+
+			if (nr < folio_nr_pages(folio)) {
+				int err;
+
+				if (folio_likely_mapped_shared(folio))
+					continue;
+				if (!folio_trylock(folio))
+					continue;
+				folio_get(folio);
+				arch_leave_lazy_mmu_mode();
+				pte_unmap_unlock(start_pte, ptl);
+				start_pte = NULL;
+				err = split_folio(folio);
+				folio_unlock(folio);
+				folio_put(folio);
+				start_pte = pte =
+					pte_offset_map_lock(mm, pmd, addr, &ptl);
+				if (!start_pte)
+					break;
+				arch_enter_lazy_mmu_mode();
+				if (!err)
+					nr = 0;
+				continue;
+			}
+
+			if (any_young)
+				ptent = pte_mkyoung(ptent);
+			if (any_dirty)
+				ptent = pte_mkdirty(ptent);
 		}
 
 		if (folio_test_swapcache(folio) || folio_test_dirty(folio)) {
 			if (!folio_trylock(folio))
 				continue;
 			/*
-			 * If folio is shared with others, we mustn't clear
-			 * the folio's dirty flag.
+			 * If we have a large folio at this point, we know it is
+			 * fully mapped so if its mapcount is the same as its
+			 * number of pages, it must be exclusive.
 			 */
-			if (folio_mapcount(folio) != 1) {
+			if (folio_mapcount(folio) != folio_nr_pages(folio)) {
 				folio_unlock(folio);
 				continue;
 			}
@@ -750,19 +764,8 @@ static int madvise_free_pte_range(pmd_t *pmd, unsigned long addr,
 		}
 
 		if (pte_young(ptent) || pte_dirty(ptent)) {
-			/*
-			 * Some of architecture(ex, PPC) don't update TLB
-			 * with set_pte_at and tlb_remove_tlb_entry so for
-			 * the portability, remap the pte with old|clean
-			 * after pte clearing.
-			 */
-			ptent = ptep_get_and_clear_full(mm, addr, pte,
-							tlb->fullmm);
-
-			ptent = pte_mkold(ptent);
-			ptent = pte_mkclean(ptent);
-			set_pte_at(mm, addr, pte, ptent);
-			tlb_remove_tlb_entry(tlb, pte, addr);
+			clear_young_dirty_ptes(vma, addr, pte, nr, cydp_flags);
+			tlb_remove_tlb_entries(tlb, pte, nr, addr);
 		}
 		folio_mark_lazyfree(folio);
 	}
-- 
2.33.1


  parent reply	other threads:[~2024-04-18 10:58 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-18 10:57 [PATCH v9 0/4] mm/madvise: enhance lazyfreeing with mTHP in madvise_free Lance Yang
2024-04-18 10:57 ` [PATCH v9 1/4] mm/madvise: introduce clear_young_dirty_ptes() batch helper Lance Yang
2024-04-18 10:57 ` [PATCH v9 2/4] mm/arm64: override " Lance Yang
2024-04-18 10:57 ` [PATCH v9 3/4] mm/memory: add any_dirty optional pointer to folio_pte_batch() Lance Yang
2024-04-18 11:59   ` David Hildenbrand
2024-04-18 12:09     ` Lance Yang
2024-04-18 10:57 ` Lance Yang [this message]
2024-04-18 12:03   ` [PATCH v9 4/4] mm/madvise: optimize lazyfreeing with mTHP in madvise_free David Hildenbrand
2024-04-18 12:16     ` Lance Yang
2024-04-18 12:33     ` Lance Yang
2024-04-18 12:44       ` David Hildenbrand
2024-04-18 12:48         ` Lance Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240418105750.98866-5-ioworker0@gmail.com \
    --to=ioworker0@gmail.com \
    --cc=21cnbao@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=david@redhat.com \
    --cc=fengwei.yin@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=peterx@redhat.com \
    --cc=ryan.roberts@arm.com \
    --cc=shy828301@gmail.com \
    --cc=songmuchun@bytedance.com \
    --cc=wangkefeng.wang@huawei.com \
    --cc=xiehuan09@gmail.com \
    --cc=zokeefe@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.