All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: kai.vehmanen@intel.com, jani.saarinen@intel.com,
	ville.syrjala@linux.intel.com, jani.nikula@linux.intel.com,
	libin.yang@linux.intel.com
Subject: [PATCH] drm/i915/audio: Fix audio time stamp programming for DP
Date: Thu, 18 Apr 2024 18:59:15 +0530	[thread overview]
Message-ID: <20240418132915.4157957-1-chaitanya.kumar.borah@intel.com> (raw)

Intel hardware is capable of programming the Maud/Naud SDPs on its
own based on real-time clocks. While doing so, it takes care
of any deviations from the theoretical values. Programming the registers
explicitly with static values can interfere with this logic. Therefore,
let the HW decide the Maud and Naud SDPs on it's own.

Fixes: 6014ac122ed0 ("drm/i915/audio: set proper N/M in modeset")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097
Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
---
 drivers/gpu/drm/i915/display/intel_audio.c | 113 ++-------------------
 1 file changed, 8 insertions(+), 105 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c
index 07e0c73204f3..ed81e1466c4b 100644
--- a/drivers/gpu/drm/i915/display/intel_audio.c
+++ b/drivers/gpu/drm/i915/display/intel_audio.c
@@ -76,19 +76,6 @@ struct intel_audio_funcs {
 				       struct intel_crtc_state *crtc_state);
 };
 
-/* DP N/M table */
-#define LC_810M	810000
-#define LC_540M	540000
-#define LC_270M	270000
-#define LC_162M	162000
-
-struct dp_aud_n_m {
-	int sample_rate;
-	int clock;
-	u16 m;
-	u16 n;
-};
-
 struct hdmi_aud_ncts {
 	int sample_rate;
 	int clock;
@@ -96,60 +83,6 @@ struct hdmi_aud_ncts {
 	int cts;
 };
 
-/* Values according to DP 1.4 Table 2-104 */
-static const struct dp_aud_n_m dp_aud_n_m[] = {
-	{ 32000, LC_162M, 1024, 10125 },
-	{ 44100, LC_162M, 784, 5625 },
-	{ 48000, LC_162M, 512, 3375 },
-	{ 64000, LC_162M, 2048, 10125 },
-	{ 88200, LC_162M, 1568, 5625 },
-	{ 96000, LC_162M, 1024, 3375 },
-	{ 128000, LC_162M, 4096, 10125 },
-	{ 176400, LC_162M, 3136, 5625 },
-	{ 192000, LC_162M, 2048, 3375 },
-	{ 32000, LC_270M, 1024, 16875 },
-	{ 44100, LC_270M, 784, 9375 },
-	{ 48000, LC_270M, 512, 5625 },
-	{ 64000, LC_270M, 2048, 16875 },
-	{ 88200, LC_270M, 1568, 9375 },
-	{ 96000, LC_270M, 1024, 5625 },
-	{ 128000, LC_270M, 4096, 16875 },
-	{ 176400, LC_270M, 3136, 9375 },
-	{ 192000, LC_270M, 2048, 5625 },
-	{ 32000, LC_540M, 1024, 33750 },
-	{ 44100, LC_540M, 784, 18750 },
-	{ 48000, LC_540M, 512, 11250 },
-	{ 64000, LC_540M, 2048, 33750 },
-	{ 88200, LC_540M, 1568, 18750 },
-	{ 96000, LC_540M, 1024, 11250 },
-	{ 128000, LC_540M, 4096, 33750 },
-	{ 176400, LC_540M, 3136, 18750 },
-	{ 192000, LC_540M, 2048, 11250 },
-	{ 32000, LC_810M, 1024, 50625 },
-	{ 44100, LC_810M, 784, 28125 },
-	{ 48000, LC_810M, 512, 16875 },
-	{ 64000, LC_810M, 2048, 50625 },
-	{ 88200, LC_810M, 1568, 28125 },
-	{ 96000, LC_810M, 1024, 16875 },
-	{ 128000, LC_810M, 4096, 50625 },
-	{ 176400, LC_810M, 3136, 28125 },
-	{ 192000, LC_810M, 2048, 16875 },
-};
-
-static const struct dp_aud_n_m *
-audio_config_dp_get_n_m(const struct intel_crtc_state *crtc_state, int rate)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(dp_aud_n_m); i++) {
-		if (rate == dp_aud_n_m[i].sample_rate &&
-		    crtc_state->port_clock == dp_aud_n_m[i].clock)
-			return &dp_aud_n_m[i];
-	}
-
-	return NULL;
-}
-
 static const struct {
 	int clock;
 	u32 config;
@@ -387,47 +320,17 @@ hsw_dp_audio_config_update(struct intel_encoder *encoder,
 			   const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
-	struct i915_audio_component *acomp = i915->display.audio.component;
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-	enum port port = encoder->port;
-	const struct dp_aud_n_m *nm;
-	int rate;
-	u32 tmp;
-
-	rate = acomp ? acomp->aud_sample_rate[port] : 0;
-	nm = audio_config_dp_get_n_m(crtc_state, rate);
-	if (nm)
-		drm_dbg_kms(&i915->drm, "using Maud %u, Naud %u\n", nm->m,
-			    nm->n);
-	else
-		drm_dbg_kms(&i915->drm, "using automatic Maud, Naud\n");
-
-	tmp = intel_de_read(i915, HSW_AUD_CFG(cpu_transcoder));
-	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
-	tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
-	tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
-	tmp |= AUD_CONFIG_N_VALUE_INDEX;
 
-	if (nm) {
-		tmp &= ~AUD_CONFIG_N_MASK;
-		tmp |= AUD_CONFIG_N(nm->n);
-		tmp |= AUD_CONFIG_N_PROG_ENABLE;
-	}
-
-	intel_de_write(i915, HSW_AUD_CFG(cpu_transcoder), tmp);
-
-	tmp = intel_de_read(i915, HSW_AUD_M_CTS_ENABLE(cpu_transcoder));
-	tmp &= ~AUD_CONFIG_M_MASK;
-	tmp &= ~AUD_M_CTS_M_VALUE_INDEX;
-	tmp &= ~AUD_M_CTS_M_PROG_ENABLE;
-
-	if (nm) {
-		tmp |= nm->m;
-		tmp |= AUD_M_CTS_M_VALUE_INDEX;
-		tmp |= AUD_M_CTS_M_PROG_ENABLE;
-	}
+	/* Enable time stamps. Let HW calculate Maud/Naud values */
+	intel_de_rmw(i915, HSW_AUD_CFG(cpu_transcoder),
+		     AUD_CONFIG_N_VALUE_INDEX |
+		     AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK |
+		     AUD_CONFIG_UPPER_N_MASK |
+		     AUD_CONFIG_LOWER_N_MASK |
+		     AUD_CONFIG_N_PROG_ENABLE,
+		     AUD_CONFIG_N_VALUE_INDEX);
 
-	intel_de_write(i915, HSW_AUD_M_CTS_ENABLE(cpu_transcoder), tmp);
 }
 
 static void
-- 
2.25.1


             reply	other threads:[~2024-04-18 13:35 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-18 13:29 Chaitanya Kumar Borah [this message]
2024-04-18 14:20 ` ✗ Fi.CI.BAT: failure for drm/i915/audio: Fix audio time stamp programming for DP Patchwork
2024-04-18 14:45 ` [PATCH] " Jani Nikula
2024-04-29  4:26 ` ✗ Fi.CI.SPARSE: warning for drm/i915/audio: Fix audio time stamp programming for DP (rev2) Patchwork
2024-04-29  4:32 ` ✓ Fi.CI.BAT: success " Patchwork
2024-04-29  5:42 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-04-30  7:00 ` ✓ Fi.CI.IGT: success " Patchwork
2024-04-30  8:34 [PATCH] drm/i915/audio: Fix audio time stamp programming for DP Chaitanya Kumar Borah
2024-04-30  9:19 ` Borah, Chaitanya Kumar
2024-04-30  9:18 Chaitanya Kumar Borah
2024-05-02  4:47 ` Shankar, Uma
2024-05-02 15:46 Chaitanya Kumar Borah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240418132915.4157957-1-chaitanya.kumar.borah@intel.com \
    --to=chaitanya.kumar.borah@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=jani.saarinen@intel.com \
    --cc=kai.vehmanen@intel.com \
    --cc=libin.yang@linux.intel.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.