From: Judith Mendez <jm@ti.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, William Breathitt Gray <william.gray@linaro.org> Cc: David Lechner <david@lechnology.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org> Subject: [PATCH 3/7] arm64: dts: ti: k3-am62p-main: Add eQEP nodes Date: Thu, 18 Apr 2024 17:14:13 -0500 [thread overview] Message-ID: <20240418221417.1592787-4-jm@ti.com> (raw) In-Reply-To: <20240418221417.1592787-1-jm@ti.com> Add eQEP DT nodes 0-2 for AM62P5 SoC. Since external hardware was needed to test eQEP, the DT nodes for eQEP were not included in the introductory commit. Now that eQEP has been validated, add nodes to k3-am62p-main.dtsi. Fixes: 29075cc09f43 ("arm64: dts: ti: Introduce AM62P5 family of SoCs") Signed-off-by: Judith Mendez <jm@ti.com> --- arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 88bc64111234b..22f02b5bc8d4f 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -805,6 +805,36 @@ ecap2: pwm@23120000 { status = "disabled"; }; + eqep0: counter@23200000 { + compatible = "ti,am3352-eqep"; + reg = <0x00 0x23200000 0x00 0x100>; + power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 59 0>; + clock-names = "fck"; + interrupts = <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + eqep1: counter@23210000 { + compatible = "ti,am3352-eqep"; + reg = <0x00 0x23210000 0x00 0x100>; + power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 60 0>; + clock-names = "fck"; + interrupts = <GIC_SPI 117 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + eqep2: counter@23220000 { + compatible = "ti,am3352-eqep"; + reg = <0x00 0x23220000 0x00 0x100>; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 62 0>; + clock-names = "fck"; + interrupts = <GIC_SPI 118 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + main_mcan0: can@20701000 { compatible = "bosch,m_can"; reg = <0x00 0x20701000 0x00 0x200>, -- 2.43.2
WARNING: multiple messages have this Message-ID (diff)
From: Judith Mendez <jm@ti.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, William Breathitt Gray <william.gray@linaro.org> Cc: David Lechner <david@lechnology.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org> Subject: [PATCH 3/7] arm64: dts: ti: k3-am62p-main: Add eQEP nodes Date: Thu, 18 Apr 2024 17:14:13 -0500 [thread overview] Message-ID: <20240418221417.1592787-4-jm@ti.com> (raw) In-Reply-To: <20240418221417.1592787-1-jm@ti.com> Add eQEP DT nodes 0-2 for AM62P5 SoC. Since external hardware was needed to test eQEP, the DT nodes for eQEP were not included in the introductory commit. Now that eQEP has been validated, add nodes to k3-am62p-main.dtsi. Fixes: 29075cc09f43 ("arm64: dts: ti: Introduce AM62P5 family of SoCs") Signed-off-by: Judith Mendez <jm@ti.com> --- arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 88bc64111234b..22f02b5bc8d4f 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -805,6 +805,36 @@ ecap2: pwm@23120000 { status = "disabled"; }; + eqep0: counter@23200000 { + compatible = "ti,am3352-eqep"; + reg = <0x00 0x23200000 0x00 0x100>; + power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 59 0>; + clock-names = "fck"; + interrupts = <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + eqep1: counter@23210000 { + compatible = "ti,am3352-eqep"; + reg = <0x00 0x23210000 0x00 0x100>; + power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 60 0>; + clock-names = "fck"; + interrupts = <GIC_SPI 117 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + eqep2: counter@23220000 { + compatible = "ti,am3352-eqep"; + reg = <0x00 0x23220000 0x00 0x100>; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 62 0>; + clock-names = "fck"; + interrupts = <GIC_SPI 118 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + main_mcan0: can@20701000 { compatible = "bosch,m_can"; reg = <0x00 0x20701000 0x00 0x200>, -- 2.43.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-18 22:15 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-18 22:14 [PATCH 0/7] Enable eQEP DT support for Sitara K3 platforms Judith Mendez 2024-04-18 22:14 ` Judith Mendez 2024-04-18 22:14 ` [PATCH 1/7] arm64: dts: ti: k3-am62-main: Add eQEP nodes Judith Mendez 2024-04-18 22:14 ` Judith Mendez 2024-04-19 13:56 ` Krzysztof Kozlowski 2024-04-19 13:56 ` Krzysztof Kozlowski 2024-04-22 22:07 ` Judith Mendez 2024-04-22 22:07 ` Judith Mendez 2024-04-18 22:14 ` [PATCH 2/7] arm64: dts: ti: k3-am62a-main: " Judith Mendez 2024-04-18 22:14 ` Judith Mendez 2024-04-18 22:14 ` Judith Mendez [this message] 2024-04-18 22:14 ` [PATCH 3/7] arm64: dts: ti: k3-am62p-main: " Judith Mendez 2024-04-18 22:14 ` [PATCH 4/7] arm64: dts: ti: k3-am64-main: " Judith Mendez 2024-04-18 22:14 ` Judith Mendez 2024-04-18 22:14 ` [PATCH 5/7] dt-bindings: counter: Update TI eQEP binding Judith Mendez 2024-04-18 22:14 ` Judith Mendez 2024-04-19 13:55 ` Krzysztof Kozlowski 2024-04-19 13:55 ` Krzysztof Kozlowski 2024-04-22 22:11 ` Judith Mendez 2024-04-22 22:11 ` Judith Mendez 2024-04-23 9:54 ` Krzysztof Kozlowski 2024-04-23 9:54 ` Krzysztof Kozlowski 2024-04-22 18:25 ` David Lechner 2024-04-22 18:25 ` David Lechner 2024-04-22 22:15 ` Judith Mendez 2024-04-22 22:15 ` Judith Mendez 2024-04-18 22:14 ` [PATCH 6/7] counter: ti-eqep: Allow eQEP driver to be built for K3 devices Judith Mendez 2024-04-18 22:14 ` Judith Mendez 2024-04-18 22:14 ` [PATCH 7/7] arm64: defconfig: Enable TI eQEP Driver Judith Mendez 2024-04-18 22:14 ` Judith Mendez
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240418221417.1592787-4-jm@ti.com \ --to=jm@ti.com \ --cc=catalin.marinas@arm.com \ --cc=conor+dt@kernel.org \ --cc=david@lechnology.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-iio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=will@kernel.org \ --cc=william.gray@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.