All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Vaishnav Achath <vaishnav.a@ti.com>,
	 Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	 Rob Herring <robh@kernel.org>
Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
	"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH v4 3/6] spi: cadence-qspi: add early busywait to cqspi_wait_for_bit()
Date: Tue, 23 Apr 2024 12:01:42 +0200	[thread overview]
Message-ID: <20240423-cdns-qspi-mbly-v4-3-3d2a7b535ad0@bootlin.com> (raw)
In-Reply-To: <20240423-cdns-qspi-mbly-v4-0-3d2a7b535ad0@bootlin.com>

Call readl_relaxed_poll_timeout() with no sleep at the start of
cqspi_wait_for_bit(). If its short timeout expires, a sleeping
readl_relaxed_poll_timeout() call takes the relay.

The reason is to avoid hrtimer interrupts on the system. All read
operations are expected to take less than 100µs.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/spi/spi-cadence-quadspi.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index a82e23526a6f..87c88ee708e4 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -120,6 +120,7 @@ struct cqspi_driver_platdata {
 /* Operation timeout value */
 #define CQSPI_TIMEOUT_MS			500
 #define CQSPI_READ_TIMEOUT_MS			10
+#define CQSPI_BUSYWAIT_TIMEOUT_US		500
 
 /* Runtime_pm autosuspend delay */
 #define CQSPI_AUTOSUSPEND_TIMEOUT		2000
@@ -298,13 +299,27 @@ struct cqspi_driver_platdata {
 
 #define CQSPI_REG_VERSAL_DMA_VAL		0x602
 
-static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr)
+static int cqspi_wait_for_bit(const struct cqspi_driver_platdata *ddata,
+			      void __iomem *reg, const u32 mask, bool clr,
+			      bool busywait)
 {
+	u64 timeout_us = CQSPI_TIMEOUT_MS * USEC_PER_MSEC;
 	u32 val;
 
+	if (busywait) {
+		int ret = readl_relaxed_poll_timeout(reg, val,
+						     (((clr ? ~val : val) & mask) == mask),
+						     0, CQSPI_BUSYWAIT_TIMEOUT_US);
+
+		if (ret != -ETIMEDOUT)
+			return ret;
+
+		timeout_us -= CQSPI_BUSYWAIT_TIMEOUT_US;
+	}
+
 	return readl_relaxed_poll_timeout(reg, val,
 					  (((clr ? ~val : val) & mask) == mask),
-					  10, CQSPI_TIMEOUT_MS * 1000);
+					  10, timeout_us);
 }
 
 static bool cqspi_is_idle(struct cqspi_st *cqspi)
@@ -434,8 +449,8 @@ static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg)
 	writel(reg, reg_base + CQSPI_REG_CMDCTRL);
 
 	/* Polling for completion. */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_CMDCTRL,
-				 CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_CMDCTRL,
+				 CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1, true);
 	if (ret) {
 		dev_err(&cqspi->pdev->dev,
 			"Flash command execution timed out.\n");
@@ -790,8 +805,8 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata,
 	}
 
 	/* Check indirect done status */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTRD,
-				 CQSPI_REG_INDIRECTRD_DONE_MASK, 0);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_INDIRECTRD,
+				 CQSPI_REG_INDIRECTRD_DONE_MASK, 0, true);
 	if (ret) {
 		dev_err(dev, "Indirect read completion error (%i)\n", ret);
 		goto failrd;
@@ -1091,8 +1106,8 @@ static int cqspi_indirect_write_execute(struct cqspi_flash_pdata *f_pdata,
 	}
 
 	/* Check indirect done status */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTWR,
-				 CQSPI_REG_INDIRECTWR_DONE_MASK, 0);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_INDIRECTWR,
+				 CQSPI_REG_INDIRECTWR_DONE_MASK, 0, false);
 	if (ret) {
 		dev_err(dev, "Indirect write completion error (%i)\n", ret);
 		goto failwr;

-- 
2.44.0


  parent reply	other threads:[~2024-04-23 10:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-23 10:01 [PATCH v4 0/6] spi: cadence-qspi: add Mobileye EyeQ5 support Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 1/6] spi: cadence-qspi: allow FIFO depth detection Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 2/6] spi: cadence-qspi: add no-IRQ mode to indirect reads Théo Lebrun
2024-04-23 10:01 ` Théo Lebrun [this message]
2024-04-23 10:01 ` [PATCH v4 4/6] spi: cadence-qspi: add mobileye,eyeq5-ospi compatible Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 5/6] MIPS: mobileye: eyeq5: Add SPI-NOR controller node Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 6/6] MIPS: mobileye: eyeq5: add octal flash node to eval board DTS Théo Lebrun
2024-04-29 15:37 ` (subset) [PATCH v4 0/6] spi: cadence-qspi: add Mobileye EyeQ5 support Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240423-cdns-qspi-mbly-v4-3-3d2a7b535ad0@bootlin.com \
    --to=theo.lebrun@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=tawfik.bayouk@mobileye.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=vaishnav.a@ti.com \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.