From: "Heiko Stübner" <heiko@sntech.de>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: t.figa@samsung.com, mturquette@linaro.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v2.1 8/9] ARM: S3C24XX: convert s3c2410 to common clock framework
Date: Wed, 23 Apr 2014 22:10:08 +0200 [thread overview]
Message-ID: <2037210.tO4Hgz3lY0@phil> (raw)
In-Reply-To: <4280912.3VlkXOGniY@phil>
Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.
As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
adapted to apply against v3.16-next/clk-s3c24xx
arch/arm/mach-s3c24xx/Kconfig | 4 ++--
arch/arm/mach-s3c24xx/common.c | 2 --
arch/arm/mach-s3c24xx/mach-amlm5900.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-bast.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-h1940.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-n30.c | 12 ++++++++----
arch/arm/mach-s3c24xx/mach-nexcoder.c | 7 +------
arch/arm/mach-s3c24xx/mach-otom.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-qt2410.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-smdk2410.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-tct_hammer.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-vr1000.c | 10 +++++++---
12 files changed, 67 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 96d1e54..57ebb13 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -37,10 +37,10 @@ comment "S3C24XX SoCs"
config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index def8627..a7b1269 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -74,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32410000,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410
@@ -83,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32410002,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410a_init,
.name = name_s3c2410a
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 284ea1f..0e175e0 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init amlm5900_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
#ifdef CONFIG_FB_S3C2410
static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
.width = 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
.map_io = amlm5900_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
- .init_time = samsung_timer_init,
+ .init_time = amlm5900_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 13e078c..ab075a6 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -50,7 +50,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
@@ -581,11 +580,16 @@ static void __init bast_map_io(void)
s3c_hwmon_set_platdata(&bast_hwmon_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init bast_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init bast_init(void)
{
register_syscore_ops(&bast_pm_syscore_ops);
@@ -613,6 +617,6 @@ MACHINE_START(BAST, "Simtec-BAST")
.map_io = bast_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = bast_init,
- .init_time = samsung_timer_init,
+ .init_time = bast_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index de08321..0c93068 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -56,7 +56,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
+static void __init h1940_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* H1940 and RX3715 need to reserve this for suspend */
static void __init h1940_reserve(void)
{
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
.reserve = h1940_reserve,
.init_irq = s3c2410_init_irq,
.init_machine = h1940_init,
- .init_time = samsung_timer_init,
+ .init_time = h1940_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 997684f..49e0393 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -45,7 +45,6 @@
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
{
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
n30_hwinit();
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init n30_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* GPB3 is the line that controls the pull-up for the USB D+ line */
static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index e2fbe17..eb7fb74 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -142,12 +142,7 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init_time(void)
{
- /*
- * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
- * meaning a xti value of 0Hz, so this machine will most likely
- * not work out of the box and needs a fixup.
- */
- s3c2440_init_clocks(0);
+ s3c2440_init_clocks(12000000);
samsung_timer_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 7e16b07..889f7d7 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -29,7 +29,6 @@
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
static void __init otom11_map_io(void)
{
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init otom11_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init otom11_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = otom11_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index b534b76..0170607 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
static void __init qt2410_map_io(void)
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
- s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init qt2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init qt2410_machine_init(void)
{
s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
.map_io = qt2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = qt2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index a773789..c961e50 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
static void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2410_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
.map_io = smdk2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = smdk2410_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 7fad8f0..3d6afe7 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
static void __init tct_hammer_map_io(void)
{
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init tct_hammer_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.map_io = tct_hammer_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = tct_hammer_init,
- .init_time = samsung_timer_init,
+ .init_time = tct_hammer_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 02d3437..27c9a37 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -42,7 +42,6 @@
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
@@ -337,11 +336,16 @@ static void __init vr1000_map_io(void)
pm_power_off = vr1000_power_off;
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init vr1000_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init vr1000_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -362,6 +366,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = vr1000_init_time,
.restart = s3c2410_restart,
MACHINE_END
--
1.9.0
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2.1 8/9] ARM: S3C24XX: convert s3c2410 to common clock framework
Date: Wed, 23 Apr 2014 22:10:08 +0200 [thread overview]
Message-ID: <2037210.tO4Hgz3lY0@phil> (raw)
In-Reply-To: <4280912.3VlkXOGniY@phil>
Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.
As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
adapted to apply against v3.16-next/clk-s3c24xx
arch/arm/mach-s3c24xx/Kconfig | 4 ++--
arch/arm/mach-s3c24xx/common.c | 2 --
arch/arm/mach-s3c24xx/mach-amlm5900.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-bast.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-h1940.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-n30.c | 12 ++++++++----
arch/arm/mach-s3c24xx/mach-nexcoder.c | 7 +------
arch/arm/mach-s3c24xx/mach-otom.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-qt2410.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-smdk2410.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-tct_hammer.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-vr1000.c | 10 +++++++---
12 files changed, 67 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 96d1e54..57ebb13 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -37,10 +37,10 @@ comment "S3C24XX SoCs"
config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index def8627..a7b1269 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -74,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32410000,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410
@@ -83,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32410002,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410a_init,
.name = name_s3c2410a
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 284ea1f..0e175e0 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init amlm5900_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
#ifdef CONFIG_FB_S3C2410
static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
.width = 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
.map_io = amlm5900_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
- .init_time = samsung_timer_init,
+ .init_time = amlm5900_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 13e078c..ab075a6 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -50,7 +50,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
@@ -581,11 +580,16 @@ static void __init bast_map_io(void)
s3c_hwmon_set_platdata(&bast_hwmon_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init bast_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init bast_init(void)
{
register_syscore_ops(&bast_pm_syscore_ops);
@@ -613,6 +617,6 @@ MACHINE_START(BAST, "Simtec-BAST")
.map_io = bast_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = bast_init,
- .init_time = samsung_timer_init,
+ .init_time = bast_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index de08321..0c93068 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -56,7 +56,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
+static void __init h1940_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* H1940 and RX3715 need to reserve this for suspend */
static void __init h1940_reserve(void)
{
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
.reserve = h1940_reserve,
.init_irq = s3c2410_init_irq,
.init_machine = h1940_init,
- .init_time = samsung_timer_init,
+ .init_time = h1940_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 997684f..49e0393 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -45,7 +45,6 @@
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
{
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
n30_hwinit();
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init n30_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* GPB3 is the line that controls the pull-up for the USB D+ line */
static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index e2fbe17..eb7fb74 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -142,12 +142,7 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init_time(void)
{
- /*
- * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
- * meaning a xti value of 0Hz, so this machine will most likely
- * not work out of the box and needs a fixup.
- */
- s3c2440_init_clocks(0);
+ s3c2440_init_clocks(12000000);
samsung_timer_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 7e16b07..889f7d7 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -29,7 +29,6 @@
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
static void __init otom11_map_io(void)
{
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init otom11_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init otom11_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = otom11_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index b534b76..0170607 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
static void __init qt2410_map_io(void)
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
- s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init qt2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init qt2410_machine_init(void)
{
s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
.map_io = qt2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = qt2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index a773789..c961e50 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
static void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2410_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
.map_io = smdk2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = smdk2410_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 7fad8f0..3d6afe7 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
static void __init tct_hammer_map_io(void)
{
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init tct_hammer_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.map_io = tct_hammer_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = tct_hammer_init,
- .init_time = samsung_timer_init,
+ .init_time = tct_hammer_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 02d3437..27c9a37 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -42,7 +42,6 @@
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
@@ -337,11 +336,16 @@ static void __init vr1000_map_io(void)
pm_power_off = vr1000_power_off;
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init vr1000_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init vr1000_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -362,6 +366,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = vr1000_init_time,
.restart = s3c2410_restart,
MACHINE_END
--
1.9.0
next prev parent reply other threads:[~2014-04-23 20:08 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-23 19:32 [PATCH v2 0/9] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework Heiko Stübner
2014-04-23 19:32 ` Heiko Stübner
2014-04-23 19:34 ` [PATCH v2 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf Heiko Stübner
2014-04-23 19:34 ` Heiko Stübner
2014-04-23 20:42 ` Sergei Shtylyov
2014-04-23 20:42 ` Sergei Shtylyov
2014-04-23 20:55 ` Tomasz Figa
2014-04-23 20:55 ` Tomasz Figa
2014-04-23 21:11 ` Heiko Stübner
2014-04-23 21:11 ` Heiko Stübner
2014-05-06 4:27 ` Kukjin Kim
2014-05-06 4:27 ` Kukjin Kim
2014-05-06 15:07 ` Tomasz Figa
2014-05-06 15:07 ` Tomasz Figa
2014-05-08 17:36 ` Tomasz Figa
2014-05-08 17:36 ` Tomasz Figa
2014-04-23 21:02 ` Sergei Shtylyov
2014-04-23 21:02 ` Sergei Shtylyov
2014-04-23 22:08 ` [PATCH v2.1 " Heiko Stübner
2014-04-23 22:08 ` Heiko Stübner
2014-04-23 19:34 ` [PATCH v2 2/9] clk: samsung: add clock driver for external clock outputs Heiko Stübner
2014-04-23 19:34 ` Heiko Stübner
2014-04-23 19:35 ` [PATCH v2 3/9] ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled Heiko Stübner
2014-04-23 19:35 ` Heiko Stübner
2014-04-23 20:09 ` [PATCH v2.1 " Heiko Stübner
2014-04-23 20:09 ` Heiko Stübner
2014-05-09 16:49 ` Paul Bolle
2014-05-09 16:49 ` Paul Bolle
2014-05-09 17:53 ` Tomasz Figa
2014-05-09 17:53 ` Tomasz Figa
2014-05-09 23:07 ` Heiko Stübner
2014-05-09 23:07 ` Heiko Stübner
2014-05-09 23:11 ` Tomasz Figa
2014-05-09 23:11 ` Tomasz Figa
2014-05-09 23:33 ` Heiko Stübner
2014-05-09 23:33 ` Heiko Stübner
2014-05-12 22:47 ` Kukjin Kim
2014-05-12 22:47 ` Kukjin Kim
2014-05-12 22:57 ` Heiko Stübner
2014-05-12 22:57 ` Heiko Stübner
2014-05-09 22:57 ` Heiko Stübner
2014-05-09 22:57 ` Heiko Stübner
2014-04-23 19:36 ` [PATCH v2 4/9] dt-bindings: add documentation for s3c2410 clock controller Heiko Stübner
2014-04-23 19:36 ` Heiko Stübner
2014-05-06 15:19 ` [ATTN] " Tomasz Figa
2014-05-06 15:19 ` Tomasz Figa
2014-04-23 19:36 ` [PATCH v2 5/9] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442 Heiko Stübner
2014-04-23 19:36 ` Heiko Stübner
2014-04-23 19:37 ` [PATCH v2 6/9] ARM: S3C24XX: add platform code for conversion to the common clock framework Heiko Stübner
2014-04-23 19:37 ` Heiko Stübner
2014-04-23 19:37 ` [PATCH v2 7/9] ARM: S3C24XX: convert s3c2440 and s3c2442 to " Heiko Stübner
2014-04-23 19:37 ` Heiko Stübner
2014-04-23 19:38 ` [PATCH v2 8/9] ARM: S3C24XX: convert s3c2410 " Heiko Stübner
2014-04-23 19:38 ` Heiko Stübner
2014-04-23 20:10 ` Heiko Stübner [this message]
2014-04-23 20:10 ` [PATCH v2.1 " Heiko Stübner
2014-04-23 19:38 ` [PATCH v2 9/9] ARM: S3C24XX: remove legacy clock code Heiko Stübner
2014-04-23 19:38 ` Heiko Stübner
2014-04-23 20:11 ` [PATCH v2.1 " Heiko Stübner
2014-04-23 20:11 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2037210.tO4Hgz3lY0@phil \
--to=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.