From: Geert Uytterhoeven <geert+renesas@glider.be> To: "Magnus Damm" <magnus.damm@gmail.com>, "Niklas Söderlund" <niklas.soderlund@ragnatech.se> Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com>, Simon Horman <horms+renesas@verge.net.au>, Yoshihiro Kaneko <ykaneko0929@gmail.com>, Dien Pham <dien.pham.ry@renesas.com>, Biju Das <biju.das.jz@bp.renesas.com>, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] arm64: dts: renesas: Fix thermal-sensors on single-zone sensors Date: Wed, 15 Jun 2022 16:04:26 +0200 [thread overview] Message-ID: <28b812fdd1fc3698311fac984ab8b91d3d655c1c.1655301684.git.geert+renesas@glider.be> (raw) "make dtbs_check": arch/arm64/boot/dts/renesas/r8a774c0-cat874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[74], [0]] is too long arch/arm64/boot/dts/renesas/r8a774c0-ek874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[79], [0]] is too long arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[82], [0]] is too long arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[87], [0]] is too long arch/arm64/boot/dts/renesas/r8a77990-ebisu.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[105], [0]] is too long From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml Indeed, the thermal sensors on R-Car E3 and RZ/G2E support only a single zone, hence #thermal-sensor-cells = <0>. Fix this by dropping the bogus zero cell from the thermal sensor specifiers. Fixes: 8fa7d18f9ee2dc20 ("arm64: dts: renesas: r8a77990: Create thermal zone to support IPA") Fixes: 8438bfda9d768157 ("arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in renesas-devel for v5.20. arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 90588bbff7e0b8e8..c563d26a7a71cc33 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1952,7 +1952,7 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 4c7c7feed7026778..565e9d85946e6f7f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -2129,7 +2129,7 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: "Magnus Damm" <magnus.damm@gmail.com>, "Niklas Söderlund" <niklas.soderlund@ragnatech.se> Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com>, Simon Horman <horms+renesas@verge.net.au>, Yoshihiro Kaneko <ykaneko0929@gmail.com>, Dien Pham <dien.pham.ry@renesas.com>, Biju Das <biju.das.jz@bp.renesas.com>, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] arm64: dts: renesas: Fix thermal-sensors on single-zone sensors Date: Wed, 15 Jun 2022 16:04:26 +0200 [thread overview] Message-ID: <28b812fdd1fc3698311fac984ab8b91d3d655c1c.1655301684.git.geert+renesas@glider.be> (raw) "make dtbs_check": arch/arm64/boot/dts/renesas/r8a774c0-cat874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[74], [0]] is too long arch/arm64/boot/dts/renesas/r8a774c0-ek874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[79], [0]] is too long arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[82], [0]] is too long arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[87], [0]] is too long arch/arm64/boot/dts/renesas/r8a77990-ebisu.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[105], [0]] is too long From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml Indeed, the thermal sensors on R-Car E3 and RZ/G2E support only a single zone, hence #thermal-sensor-cells = <0>. Fix this by dropping the bogus zero cell from the thermal sensor specifiers. Fixes: 8fa7d18f9ee2dc20 ("arm64: dts: renesas: r8a77990: Create thermal zone to support IPA") Fixes: 8438bfda9d768157 ("arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in renesas-devel for v5.20. arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 90588bbff7e0b8e8..c563d26a7a71cc33 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1952,7 +1952,7 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 4c7c7feed7026778..565e9d85946e6f7f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -2129,7 +2129,7 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-06-15 14:04 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-15 14:04 Geert Uytterhoeven [this message] 2022-06-15 14:04 ` [PATCH] arm64: dts: renesas: Fix thermal-sensors on single-zone sensors Geert Uytterhoeven 2022-06-16 8:59 ` Niklas Söderlund 2022-06-16 8:59 ` Niklas Söderlund
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=28b812fdd1fc3698311fac984ab8b91d3d655c1c.1655301684.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=biju.das.jz@bp.renesas.com \ --cc=dien.pham.ry@renesas.com \ --cc=horms+renesas@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=niklas.soderlund@ragnatech.se \ --cc=takeshi.kihara.df@renesas.com \ --cc=ykaneko0929@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.