All of lore.kernel.org
 help / color / mirror / Atom feed
From: viresh.kumar@linaro.org (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/8] CLK: SPEAr: Update clock rate table
Date: Sat, 10 Nov 2012 12:13:45 +0530	[thread overview]
Message-ID: <34c4b9a75f7ba96ad1f99de1409a4aaa1dc6afb9.1352529508.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1352529508.git.viresh.kumar@linaro.org>

From: Deepak Sikri <deepak.sikri@st.com>

This patch updates the existing rate tables with new frequencies.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/clk/spear/spear1310_clock.c | 14 ++++++
 drivers/clk/spear/spear1340_clock.c | 89 ++++++++++++++++++++++++++++---------
 drivers/clk/spear/spear3xx_clock.c  |  6 +++
 drivers/clk/spear/spear6xx_clock.c  |  1 +
 4 files changed, 89 insertions(+), 21 deletions(-)

diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
index b64d511..bc7f37e 100644
--- a/drivers/clk/spear/spear1310_clock.c
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -313,6 +313,20 @@ static struct aux_clk_masks i2s_sclk_masks = {
 /* i2s prs1 aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl i2s_prs1_rtbl[] = {
 	/* For parent clk = 49.152 MHz */
+	{.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */
+	{.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */
+	{.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */
+	{.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */
+
+	/*
+	 * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz
+	 * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz
+	 */
+	{.xscale = 1, .yscale = 3, .eq = 0},
+
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/
+
 	{.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */
 };
 
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
index 8f00533..d4de680 100644
--- a/drivers/clk/spear/spear1340_clock.c
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -190,6 +190,7 @@ static struct pll_rate_tbl pll4_rtbl[] = {
  * different values of vco1div2
  */
 static struct frac_rate_tbl amba_synth_rtbl[] = {
+	{.div = 0x073A8}, /* for vco1div2 = 600 MHz */
 	{.div = 0x06062}, /* for vco1div2 = 500 MHz */
 	{.div = 0x04D1B}, /* for vco1div2 = 400 MHz */
 	{.div = 0x04000}, /* for vco1div2 = 332 MHz */
@@ -220,6 +221,12 @@ static struct frac_rate_tbl amba_synth_rtbl[] = {
  * 500			400		200			0x02800
  * 500			500		250			0x02000
  * --------------------------------------------------------------------
+ * 600			200		100			0x06000
+ * 600			250		125			0x04CCE
+ * 600			332		166			0x039D5
+ * 600			400		200			0x03000
+ * 600			500		250			0x02666
+ * --------------------------------------------------------------------
  * 664			200		100			0x06a38
  * 664			250		125			0x054FD
  * 664			332		166			0x04000
@@ -238,28 +245,50 @@ static struct frac_rate_tbl sys_synth_rtbl[] = {
 	{.div = 0x08000},
 	{.div = 0x06a38},
 	{.div = 0x06666},
+	{.div = 0x06000},
 	{.div = 0x054FD},
 	{.div = 0x05000},
 	{.div = 0x04D18},
+	{.div = 0x04CCE},
 	{.div = 0x04000},
+	{.div = 0x039D5},
 	{.div = 0x0351E},
 	{.div = 0x03333},
 	{.div = 0x03031},
+	{.div = 0x03000},
 	{.div = 0x02A7E},
 	{.div = 0x02800},
 	{.div = 0x0268D},
+	{.div = 0x02666},
 	{.div = 0x02000},
 };
 
 /* aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl aux_rtbl[] = {
-	/* For VCO1div2 = 500 MHz */
-	{.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
-	{.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
-	{.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
-	{.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
-	{.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+	/* 12.29MHz for vic1div2=600MHz and 10.24MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 122, .eq = 0},
+	/* 14.70MHz for vic1div2=600MHz and 12.29MHz for VCO1div2=500MHz */
+	{.xscale = 10, .yscale = 204, .eq = 0},
+	/* 48MHz for vic1div2=600MHz and 40 MHz for VCO1div2=500MHz */
+	{.xscale = 4, .yscale = 25, .eq = 0},
+	/* 57.14MHz for vic1div2=600MHz and 48 MHz for VCO1div2=500MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0},
+	/* 83.33MHz for vic1div2=600MHz and 69.44MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 18, .eq = 0},
+	/* 100MHz for vic1div2=600MHz and 83.33 MHz for VCO1div2=500MHz */
+	{.xscale = 2, .yscale = 6, .eq = 0},
+	/* 125MHz for vic1div2=600MHz and 104.1MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 12, .eq = 0},
+	/* 150MHz for vic1div2=600MHz and 125MHz for VCO1div2=500MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0},
+	/* 166MHz for vic1div2=600MHz and 138.88MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 18, .eq = 1},
+	/* 200MHz for vic1div2=600MHz and 166MHz for VCO1div2=500MHz */
+	{.xscale = 1, .yscale = 3, .eq = 1},
+	/* 250MHz for vic1div2=600MHz and 208.33MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 12, .eq = 1},
+	/* 300MHz for vic1div2=600MHz and 250MHz for VCO1div2=500MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1},
 };
 
 /* gmac rate configuration table, in ascending order of rates */
@@ -273,16 +302,23 @@ static struct aux_rate_tbl gmac_rtbl[] = {
 
 /* clcd rate configuration table, in ascending order of rates */
 static struct frac_rate_tbl clcd_rtbl[] = {
+	{.div = 0x18000}, /* 25 Mhz , for vc01div4 = 300 MHz*/
+	{.div = 0x1638E}, /* 27 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
 	{.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+	{.div = 0x0A584}, /* 58 Mhz , for vco1div4 = 300 MHz */
+	{.div = 0x093B1}, /* 65 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x081BA}, /* 74 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
 	{.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x058E3}, /* 108 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x040A5}, /* 148.5 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/
@@ -351,20 +387,31 @@ static struct aux_rate_tbl adc_rtbl[] = {
 
 /* General synth rate configuration table, in ascending order of rates */
 static struct frac_rate_tbl gen_rtbl[] = {
-	/* For vco1div4 = 250 MHz */
-	{.div = 0x1624E}, /* 22.5792 MHz */
-	{.div = 0x14585}, /* 24.576 MHz */
-	{.div = 0x14000}, /* 25 MHz */
-	{.div = 0x0B127}, /* 45.1584 MHz */
-	{.div = 0x0A000}, /* 50 MHz */
-	{.div = 0x061A8}, /* 81.92 MHz */
-	{.div = 0x05000}, /* 100 MHz */
-	{.div = 0x02800}, /* 200 MHz */
-	{.div = 0x02620}, /* 210 MHz */
-	{.div = 0x02460}, /* 220 MHz */
-	{.div = 0x022C0}, /* 230 MHz */
-	{.div = 0x02160}, /* 240 MHz */
-	{.div = 0x02000}, /* 250 MHz */
+	{.div = 0x1A92B}, /* 22.5792 MHz for vco1div4=300 MHz*/
+	{.div = 0x186A0}, /* 24.576 MHz for vco1div4=300 MHz*/
+	{.div = 0x18000}, /* 25 MHz for vco1div4=300 MHz*/
+	{.div = 0x1624E}, /* 22.5792 MHz for vco1div4=250 MHz*/
+	{.div = 0x14585}, /* 24.576 MHz for vco1div4=250 MHz*/
+	{.div = 0x14000}, /* 25 MHz for vco1div4=250 MHz*/
+	{.div = 0x0D495}, /* 45.1584 MHz for vco1div4=300 MHz*/
+	{.div = 0x0C000}, /* 50 MHz for vco1div4=300 MHz*/
+	{.div = 0x0B127}, /* 45.1584 MHz for vco1div4=250 MHz*/
+	{.div = 0x0A000}, /* 50 MHz for vco1div4=250 MHz*/
+	{.div = 0x07530}, /* 81.92 MHz for vco1div4=300 MHz*/
+	{.div = 0x061A8}, /* 81.92 MHz for vco1div4=250 MHz*/
+	{.div = 0x06000}, /* 100 MHz for vco1div4=300 MHz*/
+	{.div = 0x05000}, /* 100 MHz for vco1div4=250 MHz*/
+	{.div = 0x03000}, /* 200 MHz for vco1div4=300 MHz*/
+	{.div = 0x02DB6}, /* 210 MHz for vco1div4=300 MHz*/
+	{.div = 0x02BA2}, /* 220 MHz for vco1div4=300 MHz*/
+	{.div = 0x029BD}, /* 230 MHz for vco1div4=300 MHz*/
+	{.div = 0x02800}, /* 200 MHz for vco1div4=250 MHz*/
+	{.div = 0x02666}, /* 250 MHz for vco1div4=300 MHz*/
+	{.div = 0x02620}, /* 210 MHz for vco1div4=250 MHz*/
+	{.div = 0x02460}, /* 220 MHz for vco1div4=250 MHz*/
+	{.div = 0x022C0}, /* 230 MHz for vco1div4=250 MHz*/
+	{.div = 0x02160}, /* 240 MHz for vco1div4=250 MHz*/
+	{.div = 0x02000}, /* 250 MHz for vco1div4=250 MHz*/
 };
 
 /* clock parents */
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
index 1cc034b..ea6543e 100644
--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -107,6 +107,12 @@ static struct pll_rate_tbl pll_rtbl[] = {
 /* aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl aux_rtbl[] = {
 	/* For PLL1 = 332 MHz */
+	{.xscale = 1, .yscale = 81, .eq = 0}, /* 2.049 MHz */
+	{.xscale = 1, .yscale = 59, .eq = 0}, /* 2.822 MHz */
+	{.xscale = 2, .yscale = 81, .eq = 0}, /* 4.098 MHz */
+	{.xscale = 3, .yscale = 89, .eq = 0}, /* 5.644 MHz */
+	{.xscale = 4, .yscale = 81, .eq = 0}, /* 8.197 MHz */
+	{.xscale = 4, .yscale = 59, .eq = 0}, /* 11.254 MHz */
 	{.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
 	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
 	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
index e8d2b31..8a81770 100644
--- a/drivers/clk/spear/spear6xx_clock.c
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -92,6 +92,7 @@ static struct pll_rate_tbl pll_rtbl[] = {
 /* aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl aux_rtbl[] = {
 	/* For PLL1 = 332 MHz */
+	{.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
 	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
 	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
 	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-- 
1.7.12.rc2.18.g61b472e

  parent reply	other threads:[~2012-11-10  6:43 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-10  6:43 [PATCH 0/8] CLK: SPEAr: Fixes & updates Viresh Kumar
2012-11-10  6:43 ` [PATCH 1/8] CLK: SPEAr: Fix dev_id & con_id for multiple clocks Viresh Kumar
2012-11-10  6:43 ` [PATCH 2/8] CLK: SPEAr13xx: Fix mux clock names Viresh Kumar
2012-11-10  6:43 ` [PATCH 3/8] CLK: SPEAr13xx: fix parent names of multiple clocks Viresh Kumar
2012-11-10  6:43 ` [PATCH 4/8] CLK: SPEAr: Set CLK_SET_RATE_PARENT for few clocks Viresh Kumar
2012-11-10  6:43 ` [PATCH 5/8] CLK: SPEAr: Add missing clocks Viresh Kumar
2012-11-10  6:43 ` Viresh Kumar [this message]
2012-11-10  6:43 ` [PATCH 7/8] CLK: SPEAr: Correct index scanning done for clock synths Viresh Kumar
2012-11-10  6:43 ` [PATCH 8/8] CLK: SPEAr: Remove unused dummy apb_pclk Viresh Kumar
2012-11-20  7:34 ` [PATCH 0/8] CLK: SPEAr: Fixes & updates Viresh Kumar
2012-11-21 20:21   ` Mike Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=34c4b9a75f7ba96ad1f99de1409a4aaa1dc6afb9.1352529508.git.viresh.kumar@linaro.org \
    --to=viresh.kumar@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.