[PATCH V3 1/4] opp: Rename regulator_enabled and use it as status of all resources

[Viresh Kumar <viresh.kumar@linaro.org>]

Expand the scope of the regulator_enabled flag and use it to track
status of all the resources. This will be used for other stuff in the
next patch.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/opp/core.c | 19 +++++++++----------
 drivers/opp/opp.h  |  4 ++--
 2 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 9668ea04cc80..6f43ef4945b7 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -703,12 +703,10 @@ static int _generic_set_opp_regulator(struct opp_table *opp_table,
 	 * Enable the regulator after setting its voltages, otherwise it breaks
 	 * some boot-enabled regulators.
 	 */
-	if (unlikely(!opp_table->regulator_enabled)) {
+	if (unlikely(!opp_table->enabled)) {
 		ret = regulator_enable(reg);
 		if (ret < 0)
 			dev_warn(dev, "Failed to enable regulator: %d", ret);
-		else
-			opp_table->regulator_enabled = true;
 	}
 
 	return 0;
@@ -909,12 +907,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		if (ret)
 			goto put_opp_table;
 
-		if (opp_table->regulator_enabled) {
+		if (opp_table->regulators)
 			regulator_disable(opp_table->regulators[0]);
-			opp_table->regulator_enabled = false;
-		}
 
 		ret = _set_required_opps(dev, opp_table, NULL);
+
+		opp_table->enabled = false;
 		goto put_opp_table;
 	}
 
@@ -1001,8 +999,11 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 			dev_err(dev, "Failed to set required opps: %d\n", ret);
 	}
 
-	if (!ret)
+	if (!ret) {
 		ret = _set_opp_bw(opp_table, opp, dev, false);
+		if (!ret)
+			opp_table->enabled = true;
+	}
 
 put_opp:
 	dev_pm_opp_put(opp);
@@ -1796,11 +1797,9 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 	/* Make sure there are no concurrent readers while updating opp_table */
 	WARN_ON(!list_empty(&opp_table->opp_list));
 
-	if (opp_table->regulator_enabled) {
+	if (opp_table->enabled) {
 		for (i = opp_table->regulator_count - 1; i >= 0; i--)
 			regulator_disable(opp_table->regulators[i]);
-
-		opp_table->regulator_enabled = false;
 	}
 
 	for (i = opp_table->regulator_count - 1; i >= 0; i--)
diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
index e51646ff279e..0c3de3f6db5c 100644
--- a/drivers/opp/opp.h
+++ b/drivers/opp/opp.h
@@ -147,11 +147,11 @@ enum opp_table_access {
  * @clk: Device's clock handle
  * @regulators: Supply regulators
  * @regulator_count: Number of power supply regulators. Its value can be -1
- * @regulator_enabled: Set to true if regulators were previously enabled.
  * (uninitialized), 0 (no opp-microvolt property) or > 0 (has opp-microvolt
  * property).
  * @paths: Interconnect path handles
  * @path_count: Number of interconnect paths
+ * @enabled: Set to true if the device's resources are enabled/configured.
  * @genpd_performance_state: Device's power domain support performance state.
  * @is_genpd: Marks if the OPP table belongs to a genpd.
  * @set_opp: Platform specific set_opp callback
@@ -195,9 +195,9 @@ struct opp_table {
 	struct clk *clk;
 	struct regulator **regulators;
 	int regulator_count;
-	bool regulator_enabled;
 	struct icc_path **paths;
 	unsigned int path_count;
+	bool enabled;
 	bool genpd_performance_state;
 	bool is_genpd;
 
-- 
2.25.0.rc1.19.g042ed3e048af