All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	Kevin Hilman <khilman@baylibre.com>, SoC Team <soc@kernel.org>,
	arm-soc <arm@kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Subject: [GIT PULL] STM32 DT changes for v5.6 #1
Date: Thu, 9 Jan 2020 13:51:53 +0100	[thread overview]
Message-ID: <39df1dee-3c9f-cd35-bc55-a71223e07100@st.com> (raw)

Hi Arnd, Olof and Kevin,

Please consider this first round of STM32 DT updates for v5.6.
Main changes concern stm32mp15 MPU soc including new devicetree files 
split, SDMMC2&3 support, DKX USB support.

Regards
Alex

The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

   Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

   git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git 
tags/stm32-dt-for-v5.6-1

for you to fetch changes up to f8849332aeda1c3a28a0d1bfcaff90e089d0ebcf:

   ARM: dts: stm32: Add power-supply for RGB panel on stm32429i-eval 
(2020-01-09 12:29:28 +0100)

----------------------------------------------------------------
STM32 DT updates for v5.6, round 1

Highlights:
----------

MPU part:
  -Add PWM support on DK2 board.
  -Add counter support to STM32 timers.
  -Add support of SDMMC 2&3 instances based on "arm,pl18x". SDMMC2 is
   connected to eMMC on ED1 board. SDMMC3 is connected to the GPIO
   extension connector on EV1 & DKx boards.
  -Add ADC support on ED1 board.
  -Update devicetree files split to better fit to STM32MP15 SOC & boards
   diversity.
  -Fix issues seen during YAML validation.
  -Enable Ethernet (MAC) TX clock gating during low-power mode.
  -Enable USB OTG HS support on DKx boards.
  -Enable USB Host EHCI on DKx boards.

MCU part:
  -Fix issues seen during YAML validation.

----------------------------------------------------------------
Alexandre Torgue (6):
       ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx 
SOCs family
       ARM: dts: stm32: Update stm32mp157 pinctrl files
       ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and 
STM32MP153
       ARM: dts: stm32: Manage security diversity for STM32M15x SOCs
       ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity
       ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity

Amelie Delaunay (4):
       ARM: dts: stm32: enable USBPHYC on stm32mp15 DKx boards
       ARM: dts: stm32: enable USB Host (USBH) EHCI controller on 
stm32mp15 DKx
       ARM: dts: stm32: enable USB OTG HS on stm32mp15 DKx boards
       ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1

Arnaud Pouliquen (1):
       ARM: dts: stm32: update mlahb node according to the bindings on 
stm32mp15

Benjamin Gaignard (12):
       ARM: dts: stm32: remove unused rng interrupt on stm32f429
       ARM: dts: stm32: remove "@" and "_" from stm32f4 pinmux groups
       ARM: dts: stm32: remove "@" and "_" from stm32f7 pinmux groups
       ARM: dts: stm32: remove useless clock-names from RTC node on 
stm32f429
       ARM: dts: stm32: remove useless clock-names from RTC node on 
stm32f746
       ARM: dts: stm32: fix dma controller node name on stm32f746
       ARM: dts: stm32: fix dma controller node name on stm32f743
       ARM: dts: stm32: fix dma controller node name on stm32mp157c
       ARM: dts: stm32: change nvmem node name on stm32f429
       ARM: dts: stm32: change nvmem node name on stm32mp1
       ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco
       ARM: dts: stm32: Add power-supply for RGB panel on stm32429i-eval

Christophe Roullier (3):
       ARM: dts: stm32: remove syscfg clock on stm32mp15 ethernet
       ARM: dts: stm32: adjust slew rate for Ethernet on stm32mp15
       ARM: dts: stm32: Enable MAC TX clock gating during TX low-power 
mode on stm32mp15

Fabrice Gasnier (7):
       ARM: dts: stm32: add pwm sleep pin muxing for stm32mp157c-ev1
       ARM: dts: stm32: add pwm pin muxing for stm32mp157a-dk1
       ARM: dts: stm32: add pwm sleep pins to stm32mp157c-ev1
       ARM: dts: stm32: add support for PWM on stm32mp157a-dk1
       ARM: dts: stm32: add timers counter support on stm32mp157c
       ARM: dts: stm32: add ADC pins used for stm32mp157c-ed1
       ARM: dts: stm32: add ADC support to stm32mp157c-ed1

Yann Gautier (4):
       ARM: dts: stm32: update slew-rate properties for sdmmc1 on stm32mp157
       ARM: dts: stm32: add sdmmc2 & 3 nodes for STM32MP157 SoC
       ARM: dts: stm32: enable sdmmc2 node for stm32mp157c-ed1 board
       ARM: dts: stm32: add sdmmc3 node for STM32MP1 boards

  arch/arm/boot/dts/stm32429i-eval.dts               |    8 +
  arch/arm/boot/dts/stm32f4-pinctrl.dtsi             |   28 +-
  arch/arm/boot/dts/stm32f429.dtsi                   |    4 +-
  arch/arm/boot/dts/stm32f469-disco.dts              |    8 +
  arch/arm/boot/dts/stm32f7-pinctrl.dtsi             |   22 +-
  arch/arm/boot/dts/stm32f746.dtsi                   |    5 +-
  arch/arm/boot/dts/stm32h743.dtsi                   |    6 +-
  arch/arm/boot/dts/stm32mp15-pinctrl.dtsi           | 1092 
++++++++++++++++++++
  .../boot/dts/{stm32mp157c.dtsi => stm32mp151.dtsi} |  301 ++++--
  arch/arm/boot/dts/stm32mp153.dtsi                  |   45 +
  arch/arm/boot/dts/stm32mp157-pinctrl.dtsi          |  953 
-----------------
  arch/arm/boot/dts/stm32mp157.dtsi                  |   31 +
  arch/arm/boot/dts/stm32mp157a-avenger96.dts        |    5 +-
  arch/arm/boot/dts/stm32mp157a-dk1.dts              |  498 +--------
  arch/arm/boot/dts/stm32mp157c-dk2.dts              |   15 +-
  arch/arm/boot/dts/stm32mp157c-ed1.dts              |   38 +-
  arch/arm/boot/dts/stm32mp157c-ev1.dts              |   22 +-
  arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi       |   90 --
  arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi       |   62 --
  arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi       |   78 --
  arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi       |   62 --
  arch/arm/boot/dts/stm32mp15xc.dtsi                 |   18 +
  arch/arm/boot/dts/stm32mp15xx-dkx.dtsi             |  625 +++++++++++
  arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi       |   85 ++
  arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi       |   57 +
  arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi       |   73 ++
  arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi       |   57 +
  27 files changed, 2435 insertions(+), 1853 deletions(-)
  create mode 100644 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
  rename arch/arm/boot/dts/{stm32mp157c.dtsi => stm32mp151.dtsi} (87%)
  create mode 100644 arch/arm/boot/dts/stm32mp153.dtsi
  delete mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
  create mode 100644 arch/arm/boot/dts/stm32mp157.dtsi
  delete mode 100644 arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
  delete mode 100644 arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
  delete mode 100644 arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
  delete mode 100644 arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
  create mode 100644 arch/arm/boot/dts/stm32mp15xc.dtsi
  create mode 100644 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
  create mode 100644 arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
  create mode 100644 arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
  create mode 100644 arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
  create mode 100644 arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

                 reply	other threads:[~2020-01-09 12:52 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=39df1dee-3c9f-cd35-bc55-a71223e07100@st.com \
    --to=alexandre.torgue@st.com \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=khilman@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=olof@lixom.net \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.