All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: "MyungJoo Ham" <myungjoo.ham@samsung.com>,
	"Kyungmin Park" <kyungmin.park@samsung.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Angus Ainslie" <angus@akkea.ca>,
	"Martin Kepplinger" <martink@posteo.de>,
	"Matthias Kaehlcke" <mka@chromium.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	"Georgi Djakov" <georgi.djakov@linaro.org>,
	"Dong Aisheng" <aisheng.dong@nxp.com>,
	"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Silvano di Ninno" <silvano.dininno@nxp.com>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-imx@nxp.com,
	kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 4/5] PM / devfreq: Add dynamic scaling for imx8m ddr controller
Date: Thu, 14 Nov 2019 20:33:21 +0200	[thread overview]
Message-ID: <3b1341a9a0c0dcaae1f37aebff25b773db7429cf.1573756360.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1573756360.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1573756360.git.leonard.crestez@nxp.com>

Add driver for dynamic scaling the DDR Controller on imx8m chips. Actual
frequency switching is implemented inside TF-A, this driver wraps the
SMC calls and synchronizes the clk tree.

The DRAM clocks on imx8m have the following structure (abridged):

 +----------+       |\            +------+
 | dram_pll |-------|M| dram_core |      |
 +----------+       |U|---------->| D    |
                 /--|X|           |  D   |
   dram_alt_root |  |/            |   R  |
                 |                |    C |
            +---------+           |      |
            |FIX DIV/4|           |      |
            +---------+           |      |
  composite:     |                |      |
 +----------+    |                |      |
 | dram_alt |----/                |      |
 +----------+                     |      |
 | dram_apb |-------------------->|      |
 +----------+                     +------+

The dram_pll is used for higher rates and dram_alt is used for lower
rates. The dram_alt and dram_apb clocks are "imx composite" and their
parent can also be modified.

This driver will prepare/enable the new parents ahead of switching (so
that the expected roots are enabled) and afterwards it will call
clk_set_parent to ensure the parents in clock framework are up-to-date.

The driver relies on dram_pll dram_alt and dram_apb being marked with
CLK_GET_RATE_NOCACHE for rate updates.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/devfreq/Kconfig      |   9 +
 drivers/devfreq/Makefile     |   1 +
 drivers/devfreq/imx8m-ddrc.c | 465 +++++++++++++++++++++++++++++++++++
 3 files changed, 475 insertions(+)
 create mode 100644 drivers/devfreq/imx8m-ddrc.c

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 066e6c4efaa2..923a6132e741 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -89,10 +89,19 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  Each memory bus group could contain many memoby bus block. It reads
 	  PPMU counters of memory controllers by using DEVFREQ-event device
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX8M_DDRC_DEVFREQ
+	tristate "i.MX8M DDRC DEVFREQ Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select DEVFREQ_GOV_USERSPACE
+	help
+	  This adds the DEVFREQ driver for the i.MX8M DDR Controller. It allows
+	  adjusting DRAM frequency.
+
 config ARM_TEGRA_DEVFREQ
 	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
 	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
 		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
 		ARCH_TEGRA_210_SOC || \
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 338ae8440db6..3eb4d5e6635c 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -7,10 +7,11 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE)	+= governor_powersave.o
 obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
 obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ)	+= imx8m-ddrc.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o
 
 # DEVFREQ Event Drivers
diff --git a/drivers/devfreq/imx8m-ddrc.c b/drivers/devfreq/imx8m-ddrc.c
new file mode 100644
index 000000000000..fea169619c59
--- /dev/null
+++ b/drivers/devfreq/imx8m-ddrc.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/devfreq.h>
+#include <linux/pm_opp.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/arm-smccc.h>
+
+#define IMX_SIP_DDR_DVFS			0xc2000004
+
+/* Values starting from 0 switch to specific frequency */
+#define IMX_SIP_DDR_FREQ_SET_HIGH		0x00
+
+/* Deprecated after moving IRQ handling to ATF */
+#define IMX_SIP_DDR_DVFS_WAIT_CHANGE		0x0F
+
+/* Query available frequencies. */
+#define IMX_SIP_DDR_DVFS_GET_FREQ_COUNT		0x10
+#define IMX_SIP_DDR_DVFS_GET_FREQ_INFO		0x11
+
+/*
+ * This should be in a 1:1 mapping with devicetree OPPs but
+ * firmware provides additional info.
+ */
+struct imx8m_ddrc_freq {
+	unsigned long rate;
+	unsigned long smcarg;
+	int dram_core_parent_index;
+	int dram_alt_parent_index;
+	int dram_apb_parent_index;
+};
+
+/* Hardware limitation */
+#define IMX8M_DDRC_MAX_FREQ_COUNT 4
+
+/*
+ * i.MX8M DRAM Controller clocks have the following structure (abridged):
+ *
+ * +----------+       |\            +------+
+ * | dram_pll |-------|M| dram_core |      |
+ * +----------+       |U|---------->| D    |
+ *                 /--|X|           |  D   |
+ *   dram_alt_root |  |/            |   R  |
+ *                 |                |    C |
+ *            +---------+           |      |
+ *            |FIX DIV/4|           |      |
+ *            +---------+           |      |
+ *  composite:     |                |      |
+ * +----------+    |                |      |
+ * | dram_alt |----/                |      |
+ * +----------+                     |      |
+ * | dram_apb |-------------------->|      |
+ * +----------+                     +------+
+ *
+ * The dram_pll is used for higher rates and dram_alt is used for lower rates.
+ *
+ * Frequency switching is implemented in TF-A (via SMC call) and can change the
+ * configuration of the clocks, including mux parents. The dram_alt and
+ * dram_apb clocks are "imx composite" and their parent can change too.
+ *
+ * We need to prepare/enable the new mux parents head of switching and update
+ * their information afterwards.
+ */
+struct imx8m_ddrc {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+
+	/* For frequency switching: */
+	struct clk *dram_core;
+	struct clk *dram_pll;
+	struct clk *dram_alt;
+	struct clk *dram_apb;
+
+	int freq_count;
+	struct imx8m_ddrc_freq freq_table[IMX8M_DDRC_MAX_FREQ_COUNT];
+};
+
+static struct imx8m_ddrc_freq *imx8m_ddrc_find_freq(struct imx8m_ddrc *priv,
+						    unsigned long rate)
+{
+	struct imx8m_ddrc_freq *freq;
+	int i;
+
+	/*
+	 * Firmware reports values in MT/s, so we round-down from Hz
+	 * Rounding is extra generous to ensure a match.
+	 */
+	rate = DIV_ROUND_CLOSEST(rate, 250000);
+	for (i = 0; i < priv->freq_count; ++i) {
+		freq = &priv->freq_table[i];
+		if (freq->rate == rate ||
+				freq->rate + 1 == rate ||
+				freq->rate - 1 == rate)
+			return freq;
+	}
+
+	return NULL;
+}
+
+static void imx8m_ddrc_smc_set_freq(int target_freq)
+{
+	struct arm_smccc_res res;
+	u32 online_cpus = 0;
+	int cpu;
+
+	local_irq_disable();
+
+	for_each_online_cpu(cpu)
+		online_cpus |= (1 << (cpu * 8));
+
+	/* change the ddr freqency */
+	arm_smccc_smc(IMX_SIP_DDR_DVFS, target_freq, online_cpus,
+			0, 0, 0, 0, 0, &res);
+
+	local_irq_enable();
+}
+
+static struct clk *clk_get_parent_by_index(struct clk *clk, int index)
+{
+	struct clk_hw *hw;
+
+	hw = clk_hw_get_parent_by_index(__clk_get_hw(clk), index);
+
+	return hw ? hw->clk : NULL;
+}
+
+static int imx8m_ddrc_set_freq(struct device *dev, struct imx8m_ddrc_freq *freq)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct clk *new_dram_core_parent;
+	struct clk *new_dram_alt_parent;
+	struct clk *new_dram_apb_parent;
+	int ret;
+
+	/*
+	 * Fetch new parents
+	 *
+	 * new_dram_alt_parent and new_dram_apb_parent are optional but
+	 * new_dram_core_parent is not.
+	 */
+	new_dram_core_parent = clk_get_parent_by_index(
+			priv->dram_core, freq->dram_core_parent_index - 1);
+	if (!new_dram_core_parent) {
+		dev_err(dev, "failed to fetch new dram_core parent\n");
+		return -EINVAL;
+	}
+	if (freq->dram_alt_parent_index) {
+		new_dram_alt_parent = clk_get_parent_by_index(
+				priv->dram_alt,
+				freq->dram_alt_parent_index - 1);
+		if (!new_dram_alt_parent) {
+			dev_err(dev, "failed to fetch new dram_alt parent\n");
+			return -EINVAL;
+		}
+	} else
+		new_dram_alt_parent = NULL;
+
+	if (freq->dram_apb_parent_index) {
+		new_dram_apb_parent = clk_get_parent_by_index(
+				priv->dram_apb,
+				freq->dram_apb_parent_index - 1);
+		if (!new_dram_apb_parent) {
+			dev_err(dev, "failed to fetch new dram_apb parent\n");
+			return -EINVAL;
+		}
+	} else
+		new_dram_apb_parent = NULL;
+
+	/* increase reference counts and ensure clks are ON before switch */
+	ret = clk_prepare_enable(new_dram_core_parent);
+	if (ret) {
+		dev_err(dev, "failed to enable new dram_core parent: %d\n",
+			ret);
+		goto out;
+	}
+	ret = clk_prepare_enable(new_dram_alt_parent);
+	if (ret) {
+		dev_err(dev, "failed to enable new dram_alt parent: %d\n",
+			ret);
+		goto out_disable_core_parent;
+	}
+	ret = clk_prepare_enable(new_dram_apb_parent);
+	if (ret) {
+		dev_err(dev, "failed to enable new dram_apb parent: %d\n",
+			ret);
+		goto out_disable_alt_parent;
+	}
+
+	imx8m_ddrc_smc_set_freq(freq->smcarg);
+
+	/* update parents in clk tree after switch. */
+	ret = clk_set_parent(priv->dram_core, new_dram_core_parent);
+	if (ret)
+		dev_warn(dev, "failed to set dram_core parent: %d\n", ret);
+	if (new_dram_alt_parent) {
+		ret = clk_set_parent(priv->dram_alt, new_dram_alt_parent);
+		if (ret)
+			dev_warn(dev, "failed to set dram_alt parent: %d\n",
+				 ret);
+	}
+	if (new_dram_apb_parent) {
+		ret = clk_set_parent(priv->dram_apb, new_dram_apb_parent);
+		if (ret)
+			dev_warn(dev, "failed to set dram_apb parent: %d\n",
+				 ret);
+	}
+
+	/*
+	 * Explicitly refresh dram PLL rate.
+	 *
+	 * Even if it's marked with CLK_GET_RATE_NOCACHE the rate will not be
+	 * automatically refreshed when clk_get_rate is called on children.
+	 */
+	clk_get_rate(priv->dram_pll);
+
+	/*
+	 * clk_set_parent transfer the reference count from old parent.
+	 * now we drop extra reference counts used during the switch
+	 */
+	clk_disable_unprepare(new_dram_apb_parent);
+out_disable_alt_parent:
+	clk_disable_unprepare(new_dram_alt_parent);
+out_disable_core_parent:
+	clk_disable_unprepare(new_dram_core_parent);
+out:
+	return ret;
+}
+
+static int imx8m_ddrc_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct imx8m_ddrc_freq *freq_info;
+	struct dev_pm_opp *new_opp;
+	unsigned long old_freq, new_freq;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	dev_pm_opp_put(new_opp);
+
+	old_freq = clk_get_rate(priv->dram_core);
+	if (*freq == old_freq)
+		return 0;
+
+	freq_info = imx8m_ddrc_find_freq(priv, *freq);
+	if (!freq_info)
+		return -EINVAL;
+
+	/*
+	 * Read back the clk rate to verify switch was correct and so that
+	 * we can report it on all error paths.
+	 */
+	ret = imx8m_ddrc_set_freq(dev, freq_info);
+
+	new_freq = clk_get_rate(priv->dram_core);
+	if (ret)
+		dev_err(dev, "ddrc failed freq switch to %lu from %lu: error %d. now at %lu\n",
+			old_freq, *freq, ret, new_freq);
+	else if (*freq != new_freq)
+		dev_err(dev, "ddrc failed freq update to %lu from %lu, now at %lu\n",
+			old_freq, *freq, new_freq);
+	else
+		dev_dbg(dev, "ddrc freq set to %lu (was %lu)\n",
+			*freq, old_freq);
+
+	return ret;
+}
+
+static int imx8m_ddrc_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->dram_core);
+
+	return 0;
+}
+
+static int imx8m_ddrc_get_dev_status(struct device *dev,
+				     struct devfreq_dev_status *stat)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->dram_core);
+
+	return 0;
+}
+
+static int imx8m_ddrc_init_freq_info(struct device *dev)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct arm_smccc_res res;
+	int index;
+
+	/* An error here means DDR DVFS API not supported by firmware */
+	arm_smccc_smc(IMX_SIP_DDR_DVFS, IMX_SIP_DDR_DVFS_GET_FREQ_COUNT,
+			0, 0, 0, 0, 0, 0, &res);
+	priv->freq_count = res.a0;
+	if (priv->freq_count <= 0 ||
+			priv->freq_count > IMX8M_DDRC_MAX_FREQ_COUNT)
+		return -ENODEV;
+
+	for (index = 0; index < priv->freq_count; ++index) {
+		struct imx8m_ddrc_freq *freq = &priv->freq_table[index];
+
+		arm_smccc_smc(IMX_SIP_DDR_DVFS, IMX_SIP_DDR_DVFS_GET_FREQ_INFO,
+			      index, 0, 0, 0, 0, 0, &res);
+		/* Result should be strictly positive */
+		if ((long)res.a0 <= 0)
+			return -ENODEV;
+
+		freq->rate = res.a0;
+		freq->smcarg = index;
+		freq->dram_core_parent_index = res.a1;
+		freq->dram_alt_parent_index = res.a2;
+		freq->dram_apb_parent_index = res.a3;
+
+		/* dram_core has 2 options: dram_pll or dram_alt_root */
+		if (freq->dram_core_parent_index != 1 &&
+				freq->dram_core_parent_index != 2)
+			return -ENODEV;
+		/* dram_apb and dram_alt have exactly 8 possible parents */
+		if (freq->dram_alt_parent_index > 8 ||
+				freq->dram_apb_parent_index > 8)
+			return -ENODEV;
+		/* dram_core from alt requires explicit dram_alt parent */
+		if (freq->dram_core_parent_index == 2 &&
+				freq->dram_alt_parent_index == 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int imx8m_ddrc_check_opps(struct device *dev)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct imx8m_ddrc_freq *freq_info;
+	struct dev_pm_opp *opp;
+	unsigned long freq;
+	int i, opp_count;
+
+	/* Enumerate DT OPPs and disable those not supported by firmware */
+	opp_count = dev_pm_opp_get_opp_count(dev);
+	if (opp_count < 0)
+		return opp_count;
+	for (i = 0, freq = 0; i < opp_count; ++i, ++freq) {
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+		if (IS_ERR(opp)) {
+			dev_err(dev, "Failed enumerating OPPs: %ld\n",
+				PTR_ERR(opp));
+			return PTR_ERR(opp);
+		}
+		dev_pm_opp_put(opp);
+
+		freq_info = imx8m_ddrc_find_freq(priv, freq);
+		if (!freq_info) {
+			dev_info(dev, "Disable unsupported OPP %luHz %luMT/s\n",
+					freq, DIV_ROUND_CLOSEST(freq, 250000));
+			dev_pm_opp_disable(dev, freq);
+		}
+	}
+
+	return 0;
+}
+
+static void imx8m_ddrc_exit(struct device *dev)
+{
+	dev_pm_opp_of_remove_table(dev);
+}
+
+static int imx8m_ddrc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx8m_ddrc *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = imx8m_ddrc_init_freq_info(dev);
+	if (ret) {
+		dev_err(dev, "failed to init firmware freq info: %d\n", ret);
+		return ret;
+	}
+
+	priv->dram_core = devm_clk_get(dev, "core");
+	priv->dram_pll = devm_clk_get(dev, "pll");
+	priv->dram_alt = devm_clk_get(dev, "alt");
+	priv->dram_apb = devm_clk_get(dev, "apb");
+	if (IS_ERR(priv->dram_core) ||
+		IS_ERR(priv->dram_pll) ||
+		IS_ERR(priv->dram_alt) ||
+		IS_ERR(priv->dram_apb)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to fetch clocks: %d\n", ret);
+		return ret;
+	}
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	ret = imx8m_ddrc_check_opps(dev);
+	if (ret < 0)
+		goto err;
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx8m_ddrc_target;
+	priv->profile.get_dev_status = imx8m_ddrc_get_dev_status;
+	priv->profile.exit = imx8m_ddrc_exit;
+	priv->profile.get_cur_freq = imx8m_ddrc_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->dram_core);
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, NULL);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx8m_ddrc_of_match[] = {
+	{ .compatible = "fsl,imx8m-ddrc", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8m_ddrc_of_match);
+
+static struct platform_driver imx8m_ddrc_platdrv = {
+	.probe		= imx8m_ddrc_probe,
+	.driver = {
+		.name	= "imx8m-ddrc-devfreq",
+		.of_match_table = of_match_ptr(imx8m_ddrc_of_match),
+	},
+};
+module_platform_driver(imx8m_ddrc_platdrv);
+
+MODULE_DESCRIPTION("i.MX8M DDR Controller frequency driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Jacky Bai" <ping.bai@nxp.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Angus Ainslie" <angus@akkea.ca>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	"Matthias Kaehlcke" <mka@chromium.org>,
	"Abel Vesa" <abel.vesa@nxp.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	linux-clk@vger.kernel.org,
	"MyungJoo Ham" <myungjoo.ham@samsung.com>,
	linux-imx@nxp.com, devicetree@vger.kernel.org,
	linux-pm@vger.kernel.org, "Martin Kepplinger" <martink@posteo.de>,
	"Silvano di Ninno" <silvano.dininno@nxp.com>,
	linux-arm-kernel@lists.infradead.org,
	"Dong Aisheng" <aisheng.dong@nxp.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	"Kyungmin Park" <kyungmin.park@samsung.com>,
	kernel@pengutronix.de, "Fabio Estevam" <fabio.estevam@nxp.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Georgi Djakov" <georgi.djakov@linaro.org>
Subject: [PATCH v6 4/5] PM / devfreq: Add dynamic scaling for imx8m ddr controller
Date: Thu, 14 Nov 2019 20:33:21 +0200	[thread overview]
Message-ID: <3b1341a9a0c0dcaae1f37aebff25b773db7429cf.1573756360.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1573756360.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1573756360.git.leonard.crestez@nxp.com>

Add driver for dynamic scaling the DDR Controller on imx8m chips. Actual
frequency switching is implemented inside TF-A, this driver wraps the
SMC calls and synchronizes the clk tree.

The DRAM clocks on imx8m have the following structure (abridged):

 +----------+       |\            +------+
 | dram_pll |-------|M| dram_core |      |
 +----------+       |U|---------->| D    |
                 /--|X|           |  D   |
   dram_alt_root |  |/            |   R  |
                 |                |    C |
            +---------+           |      |
            |FIX DIV/4|           |      |
            +---------+           |      |
  composite:     |                |      |
 +----------+    |                |      |
 | dram_alt |----/                |      |
 +----------+                     |      |
 | dram_apb |-------------------->|      |
 +----------+                     +------+

The dram_pll is used for higher rates and dram_alt is used for lower
rates. The dram_alt and dram_apb clocks are "imx composite" and their
parent can also be modified.

This driver will prepare/enable the new parents ahead of switching (so
that the expected roots are enabled) and afterwards it will call
clk_set_parent to ensure the parents in clock framework are up-to-date.

The driver relies on dram_pll dram_alt and dram_apb being marked with
CLK_GET_RATE_NOCACHE for rate updates.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/devfreq/Kconfig      |   9 +
 drivers/devfreq/Makefile     |   1 +
 drivers/devfreq/imx8m-ddrc.c | 465 +++++++++++++++++++++++++++++++++++
 3 files changed, 475 insertions(+)
 create mode 100644 drivers/devfreq/imx8m-ddrc.c

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 066e6c4efaa2..923a6132e741 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -89,10 +89,19 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  Each memory bus group could contain many memoby bus block. It reads
 	  PPMU counters of memory controllers by using DEVFREQ-event device
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX8M_DDRC_DEVFREQ
+	tristate "i.MX8M DDRC DEVFREQ Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select DEVFREQ_GOV_USERSPACE
+	help
+	  This adds the DEVFREQ driver for the i.MX8M DDR Controller. It allows
+	  adjusting DRAM frequency.
+
 config ARM_TEGRA_DEVFREQ
 	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
 	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
 		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
 		ARCH_TEGRA_210_SOC || \
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 338ae8440db6..3eb4d5e6635c 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -7,10 +7,11 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE)	+= governor_powersave.o
 obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
 obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ)	+= imx8m-ddrc.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o
 
 # DEVFREQ Event Drivers
diff --git a/drivers/devfreq/imx8m-ddrc.c b/drivers/devfreq/imx8m-ddrc.c
new file mode 100644
index 000000000000..fea169619c59
--- /dev/null
+++ b/drivers/devfreq/imx8m-ddrc.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/devfreq.h>
+#include <linux/pm_opp.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/arm-smccc.h>
+
+#define IMX_SIP_DDR_DVFS			0xc2000004
+
+/* Values starting from 0 switch to specific frequency */
+#define IMX_SIP_DDR_FREQ_SET_HIGH		0x00
+
+/* Deprecated after moving IRQ handling to ATF */
+#define IMX_SIP_DDR_DVFS_WAIT_CHANGE		0x0F
+
+/* Query available frequencies. */
+#define IMX_SIP_DDR_DVFS_GET_FREQ_COUNT		0x10
+#define IMX_SIP_DDR_DVFS_GET_FREQ_INFO		0x11
+
+/*
+ * This should be in a 1:1 mapping with devicetree OPPs but
+ * firmware provides additional info.
+ */
+struct imx8m_ddrc_freq {
+	unsigned long rate;
+	unsigned long smcarg;
+	int dram_core_parent_index;
+	int dram_alt_parent_index;
+	int dram_apb_parent_index;
+};
+
+/* Hardware limitation */
+#define IMX8M_DDRC_MAX_FREQ_COUNT 4
+
+/*
+ * i.MX8M DRAM Controller clocks have the following structure (abridged):
+ *
+ * +----------+       |\            +------+
+ * | dram_pll |-------|M| dram_core |      |
+ * +----------+       |U|---------->| D    |
+ *                 /--|X|           |  D   |
+ *   dram_alt_root |  |/            |   R  |
+ *                 |                |    C |
+ *            +---------+           |      |
+ *            |FIX DIV/4|           |      |
+ *            +---------+           |      |
+ *  composite:     |                |      |
+ * +----------+    |                |      |
+ * | dram_alt |----/                |      |
+ * +----------+                     |      |
+ * | dram_apb |-------------------->|      |
+ * +----------+                     +------+
+ *
+ * The dram_pll is used for higher rates and dram_alt is used for lower rates.
+ *
+ * Frequency switching is implemented in TF-A (via SMC call) and can change the
+ * configuration of the clocks, including mux parents. The dram_alt and
+ * dram_apb clocks are "imx composite" and their parent can change too.
+ *
+ * We need to prepare/enable the new mux parents head of switching and update
+ * their information afterwards.
+ */
+struct imx8m_ddrc {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+
+	/* For frequency switching: */
+	struct clk *dram_core;
+	struct clk *dram_pll;
+	struct clk *dram_alt;
+	struct clk *dram_apb;
+
+	int freq_count;
+	struct imx8m_ddrc_freq freq_table[IMX8M_DDRC_MAX_FREQ_COUNT];
+};
+
+static struct imx8m_ddrc_freq *imx8m_ddrc_find_freq(struct imx8m_ddrc *priv,
+						    unsigned long rate)
+{
+	struct imx8m_ddrc_freq *freq;
+	int i;
+
+	/*
+	 * Firmware reports values in MT/s, so we round-down from Hz
+	 * Rounding is extra generous to ensure a match.
+	 */
+	rate = DIV_ROUND_CLOSEST(rate, 250000);
+	for (i = 0; i < priv->freq_count; ++i) {
+		freq = &priv->freq_table[i];
+		if (freq->rate == rate ||
+				freq->rate + 1 == rate ||
+				freq->rate - 1 == rate)
+			return freq;
+	}
+
+	return NULL;
+}
+
+static void imx8m_ddrc_smc_set_freq(int target_freq)
+{
+	struct arm_smccc_res res;
+	u32 online_cpus = 0;
+	int cpu;
+
+	local_irq_disable();
+
+	for_each_online_cpu(cpu)
+		online_cpus |= (1 << (cpu * 8));
+
+	/* change the ddr freqency */
+	arm_smccc_smc(IMX_SIP_DDR_DVFS, target_freq, online_cpus,
+			0, 0, 0, 0, 0, &res);
+
+	local_irq_enable();
+}
+
+static struct clk *clk_get_parent_by_index(struct clk *clk, int index)
+{
+	struct clk_hw *hw;
+
+	hw = clk_hw_get_parent_by_index(__clk_get_hw(clk), index);
+
+	return hw ? hw->clk : NULL;
+}
+
+static int imx8m_ddrc_set_freq(struct device *dev, struct imx8m_ddrc_freq *freq)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct clk *new_dram_core_parent;
+	struct clk *new_dram_alt_parent;
+	struct clk *new_dram_apb_parent;
+	int ret;
+
+	/*
+	 * Fetch new parents
+	 *
+	 * new_dram_alt_parent and new_dram_apb_parent are optional but
+	 * new_dram_core_parent is not.
+	 */
+	new_dram_core_parent = clk_get_parent_by_index(
+			priv->dram_core, freq->dram_core_parent_index - 1);
+	if (!new_dram_core_parent) {
+		dev_err(dev, "failed to fetch new dram_core parent\n");
+		return -EINVAL;
+	}
+	if (freq->dram_alt_parent_index) {
+		new_dram_alt_parent = clk_get_parent_by_index(
+				priv->dram_alt,
+				freq->dram_alt_parent_index - 1);
+		if (!new_dram_alt_parent) {
+			dev_err(dev, "failed to fetch new dram_alt parent\n");
+			return -EINVAL;
+		}
+	} else
+		new_dram_alt_parent = NULL;
+
+	if (freq->dram_apb_parent_index) {
+		new_dram_apb_parent = clk_get_parent_by_index(
+				priv->dram_apb,
+				freq->dram_apb_parent_index - 1);
+		if (!new_dram_apb_parent) {
+			dev_err(dev, "failed to fetch new dram_apb parent\n");
+			return -EINVAL;
+		}
+	} else
+		new_dram_apb_parent = NULL;
+
+	/* increase reference counts and ensure clks are ON before switch */
+	ret = clk_prepare_enable(new_dram_core_parent);
+	if (ret) {
+		dev_err(dev, "failed to enable new dram_core parent: %d\n",
+			ret);
+		goto out;
+	}
+	ret = clk_prepare_enable(new_dram_alt_parent);
+	if (ret) {
+		dev_err(dev, "failed to enable new dram_alt parent: %d\n",
+			ret);
+		goto out_disable_core_parent;
+	}
+	ret = clk_prepare_enable(new_dram_apb_parent);
+	if (ret) {
+		dev_err(dev, "failed to enable new dram_apb parent: %d\n",
+			ret);
+		goto out_disable_alt_parent;
+	}
+
+	imx8m_ddrc_smc_set_freq(freq->smcarg);
+
+	/* update parents in clk tree after switch. */
+	ret = clk_set_parent(priv->dram_core, new_dram_core_parent);
+	if (ret)
+		dev_warn(dev, "failed to set dram_core parent: %d\n", ret);
+	if (new_dram_alt_parent) {
+		ret = clk_set_parent(priv->dram_alt, new_dram_alt_parent);
+		if (ret)
+			dev_warn(dev, "failed to set dram_alt parent: %d\n",
+				 ret);
+	}
+	if (new_dram_apb_parent) {
+		ret = clk_set_parent(priv->dram_apb, new_dram_apb_parent);
+		if (ret)
+			dev_warn(dev, "failed to set dram_apb parent: %d\n",
+				 ret);
+	}
+
+	/*
+	 * Explicitly refresh dram PLL rate.
+	 *
+	 * Even if it's marked with CLK_GET_RATE_NOCACHE the rate will not be
+	 * automatically refreshed when clk_get_rate is called on children.
+	 */
+	clk_get_rate(priv->dram_pll);
+
+	/*
+	 * clk_set_parent transfer the reference count from old parent.
+	 * now we drop extra reference counts used during the switch
+	 */
+	clk_disable_unprepare(new_dram_apb_parent);
+out_disable_alt_parent:
+	clk_disable_unprepare(new_dram_alt_parent);
+out_disable_core_parent:
+	clk_disable_unprepare(new_dram_core_parent);
+out:
+	return ret;
+}
+
+static int imx8m_ddrc_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct imx8m_ddrc_freq *freq_info;
+	struct dev_pm_opp *new_opp;
+	unsigned long old_freq, new_freq;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	dev_pm_opp_put(new_opp);
+
+	old_freq = clk_get_rate(priv->dram_core);
+	if (*freq == old_freq)
+		return 0;
+
+	freq_info = imx8m_ddrc_find_freq(priv, *freq);
+	if (!freq_info)
+		return -EINVAL;
+
+	/*
+	 * Read back the clk rate to verify switch was correct and so that
+	 * we can report it on all error paths.
+	 */
+	ret = imx8m_ddrc_set_freq(dev, freq_info);
+
+	new_freq = clk_get_rate(priv->dram_core);
+	if (ret)
+		dev_err(dev, "ddrc failed freq switch to %lu from %lu: error %d. now at %lu\n",
+			old_freq, *freq, ret, new_freq);
+	else if (*freq != new_freq)
+		dev_err(dev, "ddrc failed freq update to %lu from %lu, now at %lu\n",
+			old_freq, *freq, new_freq);
+	else
+		dev_dbg(dev, "ddrc freq set to %lu (was %lu)\n",
+			*freq, old_freq);
+
+	return ret;
+}
+
+static int imx8m_ddrc_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->dram_core);
+
+	return 0;
+}
+
+static int imx8m_ddrc_get_dev_status(struct device *dev,
+				     struct devfreq_dev_status *stat)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->dram_core);
+
+	return 0;
+}
+
+static int imx8m_ddrc_init_freq_info(struct device *dev)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct arm_smccc_res res;
+	int index;
+
+	/* An error here means DDR DVFS API not supported by firmware */
+	arm_smccc_smc(IMX_SIP_DDR_DVFS, IMX_SIP_DDR_DVFS_GET_FREQ_COUNT,
+			0, 0, 0, 0, 0, 0, &res);
+	priv->freq_count = res.a0;
+	if (priv->freq_count <= 0 ||
+			priv->freq_count > IMX8M_DDRC_MAX_FREQ_COUNT)
+		return -ENODEV;
+
+	for (index = 0; index < priv->freq_count; ++index) {
+		struct imx8m_ddrc_freq *freq = &priv->freq_table[index];
+
+		arm_smccc_smc(IMX_SIP_DDR_DVFS, IMX_SIP_DDR_DVFS_GET_FREQ_INFO,
+			      index, 0, 0, 0, 0, 0, &res);
+		/* Result should be strictly positive */
+		if ((long)res.a0 <= 0)
+			return -ENODEV;
+
+		freq->rate = res.a0;
+		freq->smcarg = index;
+		freq->dram_core_parent_index = res.a1;
+		freq->dram_alt_parent_index = res.a2;
+		freq->dram_apb_parent_index = res.a3;
+
+		/* dram_core has 2 options: dram_pll or dram_alt_root */
+		if (freq->dram_core_parent_index != 1 &&
+				freq->dram_core_parent_index != 2)
+			return -ENODEV;
+		/* dram_apb and dram_alt have exactly 8 possible parents */
+		if (freq->dram_alt_parent_index > 8 ||
+				freq->dram_apb_parent_index > 8)
+			return -ENODEV;
+		/* dram_core from alt requires explicit dram_alt parent */
+		if (freq->dram_core_parent_index == 2 &&
+				freq->dram_alt_parent_index == 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int imx8m_ddrc_check_opps(struct device *dev)
+{
+	struct imx8m_ddrc *priv = dev_get_drvdata(dev);
+	struct imx8m_ddrc_freq *freq_info;
+	struct dev_pm_opp *opp;
+	unsigned long freq;
+	int i, opp_count;
+
+	/* Enumerate DT OPPs and disable those not supported by firmware */
+	opp_count = dev_pm_opp_get_opp_count(dev);
+	if (opp_count < 0)
+		return opp_count;
+	for (i = 0, freq = 0; i < opp_count; ++i, ++freq) {
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+		if (IS_ERR(opp)) {
+			dev_err(dev, "Failed enumerating OPPs: %ld\n",
+				PTR_ERR(opp));
+			return PTR_ERR(opp);
+		}
+		dev_pm_opp_put(opp);
+
+		freq_info = imx8m_ddrc_find_freq(priv, freq);
+		if (!freq_info) {
+			dev_info(dev, "Disable unsupported OPP %luHz %luMT/s\n",
+					freq, DIV_ROUND_CLOSEST(freq, 250000));
+			dev_pm_opp_disable(dev, freq);
+		}
+	}
+
+	return 0;
+}
+
+static void imx8m_ddrc_exit(struct device *dev)
+{
+	dev_pm_opp_of_remove_table(dev);
+}
+
+static int imx8m_ddrc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx8m_ddrc *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = imx8m_ddrc_init_freq_info(dev);
+	if (ret) {
+		dev_err(dev, "failed to init firmware freq info: %d\n", ret);
+		return ret;
+	}
+
+	priv->dram_core = devm_clk_get(dev, "core");
+	priv->dram_pll = devm_clk_get(dev, "pll");
+	priv->dram_alt = devm_clk_get(dev, "alt");
+	priv->dram_apb = devm_clk_get(dev, "apb");
+	if (IS_ERR(priv->dram_core) ||
+		IS_ERR(priv->dram_pll) ||
+		IS_ERR(priv->dram_alt) ||
+		IS_ERR(priv->dram_apb)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to fetch clocks: %d\n", ret);
+		return ret;
+	}
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	ret = imx8m_ddrc_check_opps(dev);
+	if (ret < 0)
+		goto err;
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx8m_ddrc_target;
+	priv->profile.get_dev_status = imx8m_ddrc_get_dev_status;
+	priv->profile.exit = imx8m_ddrc_exit;
+	priv->profile.get_cur_freq = imx8m_ddrc_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->dram_core);
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, NULL);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx8m_ddrc_of_match[] = {
+	{ .compatible = "fsl,imx8m-ddrc", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8m_ddrc_of_match);
+
+static struct platform_driver imx8m_ddrc_platdrv = {
+	.probe		= imx8m_ddrc_probe,
+	.driver = {
+		.name	= "imx8m-ddrc-devfreq",
+		.of_match_table = of_match_ptr(imx8m_ddrc_of_match),
+	},
+};
+module_platform_driver(imx8m_ddrc_platdrv);
+
+MODULE_DESCRIPTION("i.MX8M DDR Controller frequency driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-11-14 18:33 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-14 18:33 [PATCH v6 0/5] PM / devfreq: Add dynamic scaling for imx8m ddr controller Leonard Crestez
2019-11-14 18:33 ` Leonard Crestez
2019-11-14 18:33 ` [PATCH v6 1/5] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks Leonard Crestez
2019-11-14 18:33   ` Leonard Crestez
2019-11-14 18:33 ` [PATCH v6 2/5] clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE Leonard Crestez
2019-11-14 18:33   ` Leonard Crestez
2019-11-14 18:33 ` [PATCH v6 3/5] dt-bindings: memory: Add bindings for imx8m ddr controller Leonard Crestez
2019-11-14 18:33   ` Leonard Crestez
2019-11-15  5:23   ` Chanwoo Choi
2019-11-15  5:23     ` Chanwoo Choi
2019-11-21 21:00   ` Rob Herring
2019-11-21 21:00     ` Rob Herring
2019-11-14 18:33 ` Leonard Crestez [this message]
2019-11-14 18:33   ` [PATCH v6 4/5] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-11-15  1:31   ` Chanwoo Choi
2019-11-15  1:31     ` Chanwoo Choi
2019-11-18 14:37     ` Leonard Crestez
2019-11-18 14:37       ` Leonard Crestez
2019-11-22  1:47       ` Chanwoo Choi
2019-11-22  1:47         ` Chanwoo Choi
2019-11-14 18:33 ` [PATCH v6 5/5] arm64: dts: imx8m: Add ddr controller nodes Leonard Crestez
2019-11-14 18:33   ` Leonard Crestez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3b1341a9a0c0dcaae1f37aebff25b773db7429cf.1573756360.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=a.swigon@partner.samsung.com \
    --cc=abailon@baylibre.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=angus@akkea.ca \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=georgi.djakov@linaro.org \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=martink@posteo.de \
    --cc=mka@chromium.org \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=ping.bai@nxp.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=silvano.dininno@nxp.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.