All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: Dmitry Osipenko <digetx@gmail.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Vladimir Zapolskiy <vz@mleia.com>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/7] regulator: push allocation in regulator_ena_gpio_request() out of lock
Date: Wed, 12 Aug 2020 03:31:34 +0200	[thread overview]
Message-ID: <41fe6a9670335721b48e8f5195038c3d67a3bf92.1597195321.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1597195321.git.mirq-linux@rere.qmqm.pl>

Move another allocation out of regulator_list_mutex-protected region, as
reclaim might want to take the same lock.

WARNING: possible circular locking dependency detected
5.7.13+ #534 Not tainted
------------------------------------------------------
kswapd0/383 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0

but task is already holding lock:
c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (fs_reclaim){+.+.}-{0:0}:
       fs_reclaim_acquire.part.11+0x40/0x50
       fs_reclaim_acquire+0x24/0x28
       kmem_cache_alloc_trace+0x40/0x1e8
       regulator_register+0x384/0x1630
       devm_regulator_register+0x50/0x84
       reg_fixed_voltage_probe+0x248/0x35c
[...]
other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               lock(regulator_list_mutex);
                               lock(fs_reclaim);
  lock(regulator_list_mutex);

 *** DEADLOCK ***
[...]
2 locks held by kswapd0/383:
 #0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
 #1: cb70e5e0 (hctx->srcu){....}-{0:0}, at: hctx_lock+0x60/0xb8
[...]

Fixes: 541d052d7215 ("regulator: core: Only support passing enable GPIO descriptors")
[this commit only changes context]
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
[this is when the regulator_list_mutex was introduced in reclaim locking path]

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
 drivers/regulator/core.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 510d234f6c46..3dd4d4914075 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2203,10 +2203,13 @@ EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias);
 static int regulator_ena_gpio_request(struct regulator_dev *rdev,
 				const struct regulator_config *config)
 {
-	struct regulator_enable_gpio *pin;
+	struct regulator_enable_gpio *pin, *new_pin;
 	struct gpio_desc *gpiod;
 
 	gpiod = config->ena_gpiod;
+	new_pin = kzalloc(sizeof(*new_pin), GFP_KERNEL);
+
+	mutex_lock(&regulator_list_mutex);
 
 	list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
 		if (pin->gpiod == gpiod) {
@@ -2215,9 +2218,13 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
 		}
 	}
 
-	pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
-	if (pin == NULL)
+	if (new_pin == NULL) {
+		mutex_unlock(&regulator_list_mutex);
 		return -ENOMEM;
+	}
+
+	pin = new_pin;
+	new_pin = NULL;
 
 	pin->gpiod = gpiod;
 	list_add(&pin->list, &regulator_ena_gpio_list);
@@ -2225,6 +2232,10 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
 update_ena_gpio_to_rdev:
 	pin->request_count++;
 	rdev->ena_pin = pin;
+
+	mutex_unlock(&regulator_list_mutex);
+	kfree(new_pin);
+
 	return 0;
 }
 
@@ -5179,9 +5190,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	}
 
 	if (config->ena_gpiod) {
-		mutex_lock(&regulator_list_mutex);
 		ret = regulator_ena_gpio_request(rdev, config);
-		mutex_unlock(&regulator_list_mutex);
 		if (ret != 0) {
 			rdev_err(rdev, "Failed to request enable GPIO: %d\n",
 				 ret);
-- 
2.20.1


  parent reply	other threads:[~2020-08-12  1:31 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-12  1:31 [PATCH v2 0/7] regulator: fix deadlock vs memory reclaim Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 1/7] regulator: push allocation in regulator_init_coupling() outside of lock Michał Mirosław
2020-08-12  1:31 ` Michał Mirosław [this message]
2020-08-18  0:25   ` [PATCH v2 2/7] regulator: push allocation in regulator_ena_gpio_request() out " Dmitry Osipenko
2020-08-12  1:31 ` [PATCH v2 3/7] regulator: push allocations in create_regulator() outside " Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 5/7] regulator: plug of_node leak in regulator_register()'s error path Michał Mirosław
2020-08-12  6:29   ` Vladimir Zapolskiy
2020-08-12 14:09     ` Michał Mirosław
2020-08-13  8:29       ` Vladimir Zapolskiy
2020-08-12  1:31 ` [PATCH v2 4/7] regulator: push allocation in set_consumer_device_supply() out of lock Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 6/7] regulator: cleanup regulator_ena_gpio_free() Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 7/7] regulator: remove superfluous lock in regulator_resolve_coupling() Michał Mirosław

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41fe6a9670335721b48e8f5195038c3d67a3bf92.1597195321.git.mirq-linux@rere.qmqm.pl \
    --to=mirq-linux@rere.qmqm.pl \
    --cc=broonie@kernel.org \
    --cc=digetx@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vz@mleia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.