From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] ARM: shmobile: defconfig: Refresh for v6.0-rc1 Date: Mon, 22 Aug 2022 11:51:49 +0200 [thread overview] Message-ID: <428755447c1abbc8f1f08a63e83353d23ab22dd6.1661154821.git.geert+renesas@glider.be> (raw) Refresh the defconfig for Renesas ARM systems: - Enable RZ/N1 A5PSW Ethernet switch support incl. dependencies (RZN1D-DB), - Move CONFIG_CAN_RCAR=y (moved in commit d7786af59860a113 ("net: Kconfig: move the CAN device menu to the "Device Drivers" section")), - Enable RZ/N1 Gigabit Ethernet MAC support (RZN1D-DB), - Enable RZ/N1 Pin control support (RZN1D-DB), - Enable RZ/N1 DMA support incl. dependencies (RZN1D-DB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index a29bebb3742ed386..ebdac79c10f5564e 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -32,8 +32,8 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y +CONFIG_NET_DSA=y CONFIG_CAN=y -CONFIG_CAN_RCAR=y CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_RCAR_GEN2=y @@ -52,11 +52,14 @@ CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y +CONFIG_NET_DSA_RZN1_A5PSW=y CONFIG_SH_ETH=y CONFIG_RAVB=y CONFIG_SMSC911X=y +CONFIG_STMMAC_ETH=y CONFIG_MICREL_PHY=y CONFIG_SMSC_PHY=y +CONFIG_CAN_RCAR=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set @@ -91,6 +94,7 @@ CONFIG_SPI_SH_MSIOF=y CONFIG_SPI_SH_HSPI=y CONFIG_PINCTRL_RZA1=y CONFIG_PINCTRL_RZA2=y +CONFIG_PINCTRL_RZN1=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_PCA953X=y @@ -180,6 +184,8 @@ CONFIG_RTC_DRV_DA9063=y CONFIG_RTC_DRV_SH=y CONFIG_RTC_DRV_RZN1=y CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_RZN1_DMAMUX=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=y CONFIG_STAGING=y -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] ARM: shmobile: defconfig: Refresh for v6.0-rc1 Date: Mon, 22 Aug 2022 11:51:49 +0200 [thread overview] Message-ID: <428755447c1abbc8f1f08a63e83353d23ab22dd6.1661154821.git.geert+renesas@glider.be> (raw) Refresh the defconfig for Renesas ARM systems: - Enable RZ/N1 A5PSW Ethernet switch support incl. dependencies (RZN1D-DB), - Move CONFIG_CAN_RCAR=y (moved in commit d7786af59860a113 ("net: Kconfig: move the CAN device menu to the "Device Drivers" section")), - Enable RZ/N1 Gigabit Ethernet MAC support (RZN1D-DB), - Enable RZ/N1 Pin control support (RZN1D-DB), - Enable RZ/N1 DMA support incl. dependencies (RZN1D-DB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index a29bebb3742ed386..ebdac79c10f5564e 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -32,8 +32,8 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y +CONFIG_NET_DSA=y CONFIG_CAN=y -CONFIG_CAN_RCAR=y CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_RCAR_GEN2=y @@ -52,11 +52,14 @@ CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y +CONFIG_NET_DSA_RZN1_A5PSW=y CONFIG_SH_ETH=y CONFIG_RAVB=y CONFIG_SMSC911X=y +CONFIG_STMMAC_ETH=y CONFIG_MICREL_PHY=y CONFIG_SMSC_PHY=y +CONFIG_CAN_RCAR=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set @@ -91,6 +94,7 @@ CONFIG_SPI_SH_MSIOF=y CONFIG_SPI_SH_HSPI=y CONFIG_PINCTRL_RZA1=y CONFIG_PINCTRL_RZA2=y +CONFIG_PINCTRL_RZN1=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_PCA953X=y @@ -180,6 +184,8 @@ CONFIG_RTC_DRV_DA9063=y CONFIG_RTC_DRV_SH=y CONFIG_RTC_DRV_RZN1=y CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_RZN1_DMAMUX=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=y CONFIG_STAGING=y -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-08-22 9:52 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-22 9:51 Geert Uytterhoeven [this message] 2022-08-22 9:51 ` [PATCH] ARM: shmobile: defconfig: Refresh for v6.0-rc1 Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=428755447c1abbc8f1f08a63e83353d23ab22dd6.1661154821.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.