From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Subject: [PATCH v2 02/10] soc: renesas: Identify R-Car H3e-2G and M3e-2G Date: Mon, 19 Jul 2021 17:38:33 +0200 [thread overview] Message-ID: <42b4578ab4739cb48ec3aed0a447fc40c34de1e5.1626708063.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1626708063.git.geert+renesas@glider.be> Add support for identifying the R-Car H3e-2G (R8A779M1) and R-Car M3e-2G (R8A779M3) SoCs. As these are different gradings of the already supported R-Car H3 ES3.0 (R8A77951) and M3-W+ (R8A77961) SoCs, support for them is enabled through the existing ARCH_R8A77951 and ARCH_R8A77961 configuration symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- v2: - Drop new fam_rcar_gen3e and soc_rcar_[hm]3e, just use the existing soc_rcar_{h3,m3_w}, - Add Reviewed-by. --- drivers/soc/renesas/Kconfig | 2 ++ drivers/soc/renesas/renesas-soc.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 71b44c31b012dd24..07e0ecd64319da63 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -208,6 +208,7 @@ config ARCH_R8A77951 help This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and later). + This includes different gradings like R-Car H3e-2G. config ARCH_R8A77965 bool "ARM64 Platform support for R-Car M3-N" @@ -229,6 +230,7 @@ config ARCH_R8A77961 select SYSC_R8A77961 help This enables support for the Renesas R-Car M3-W+ SoC. + This includes different gradings like R-Car M3e-2G. config ARCH_R8A77980 bool "ARM64 Platform support for R-Car V3H" diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c index 8310fce7714e9d21..dab9f5a0aad00233 100644 --- a/drivers/soc/renesas/renesas-soc.c +++ b/drivers/soc/renesas/renesas-soc.c @@ -284,11 +284,15 @@ static const struct of_device_id renesas_socs[] __initconst = { #if defined(CONFIG_ARCH_R8A77950) || defined(CONFIG_ARCH_R8A77951) { .compatible = "renesas,r8a7795", .data = &soc_rcar_h3 }, #endif +#ifdef CONFIG_ARCH_R8A77951 + { .compatible = "renesas,r8a779m1", .data = &soc_rcar_h3 }, +#endif #ifdef CONFIG_ARCH_R8A77960 { .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w }, #endif #ifdef CONFIG_ARCH_R8A77961 { .compatible = "renesas,r8a77961", .data = &soc_rcar_m3_w }, + { .compatible = "renesas,r8a779m3", .data = &soc_rcar_m3_w }, #endif #ifdef CONFIG_ARCH_R8A77965 { .compatible = "renesas,r8a77965", .data = &soc_rcar_m3_n }, -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Subject: [PATCH v2 02/10] soc: renesas: Identify R-Car H3e-2G and M3e-2G Date: Mon, 19 Jul 2021 17:38:33 +0200 [thread overview] Message-ID: <42b4578ab4739cb48ec3aed0a447fc40c34de1e5.1626708063.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1626708063.git.geert+renesas@glider.be> Add support for identifying the R-Car H3e-2G (R8A779M1) and R-Car M3e-2G (R8A779M3) SoCs. As these are different gradings of the already supported R-Car H3 ES3.0 (R8A77951) and M3-W+ (R8A77961) SoCs, support for them is enabled through the existing ARCH_R8A77951 and ARCH_R8A77961 configuration symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- v2: - Drop new fam_rcar_gen3e and soc_rcar_[hm]3e, just use the existing soc_rcar_{h3,m3_w}, - Add Reviewed-by. --- drivers/soc/renesas/Kconfig | 2 ++ drivers/soc/renesas/renesas-soc.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 71b44c31b012dd24..07e0ecd64319da63 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -208,6 +208,7 @@ config ARCH_R8A77951 help This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and later). + This includes different gradings like R-Car H3e-2G. config ARCH_R8A77965 bool "ARM64 Platform support for R-Car M3-N" @@ -229,6 +230,7 @@ config ARCH_R8A77961 select SYSC_R8A77961 help This enables support for the Renesas R-Car M3-W+ SoC. + This includes different gradings like R-Car M3e-2G. config ARCH_R8A77980 bool "ARM64 Platform support for R-Car V3H" diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c index 8310fce7714e9d21..dab9f5a0aad00233 100644 --- a/drivers/soc/renesas/renesas-soc.c +++ b/drivers/soc/renesas/renesas-soc.c @@ -284,11 +284,15 @@ static const struct of_device_id renesas_socs[] __initconst = { #if defined(CONFIG_ARCH_R8A77950) || defined(CONFIG_ARCH_R8A77951) { .compatible = "renesas,r8a7795", .data = &soc_rcar_h3 }, #endif +#ifdef CONFIG_ARCH_R8A77951 + { .compatible = "renesas,r8a779m1", .data = &soc_rcar_h3 }, +#endif #ifdef CONFIG_ARCH_R8A77960 { .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w }, #endif #ifdef CONFIG_ARCH_R8A77961 { .compatible = "renesas,r8a77961", .data = &soc_rcar_m3_w }, + { .compatible = "renesas,r8a779m3", .data = &soc_rcar_m3_w }, #endif #ifdef CONFIG_ARCH_R8A77965 { .compatible = "renesas,r8a77965", .data = &soc_rcar_m3_n }, -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-19 15:58 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-19 15:38 [PATCH v2 00/10] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 01/10] dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven [this message] 2021-07-19 15:38 ` [PATCH v2 02/10] soc: renesas: Identify R-Car H3e-2G and M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 03/10] arm64: dts: renesas: Add Renesas R8A779M1 SoC support Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 04/10] arm64: dts: renesas: Add Renesas R8A779M3 " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 05/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 06/10] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 07/10] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 08/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 09/10] arm64: dts: renesas: Add support for M3ULCB " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 10/10] arm64: dts: renesas: Add support for M3ULCB+Kingfisher " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=42b4578ab4739cb48ec3aed0a447fc40c34de1e5.1626708063.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=devicetree@vger.kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.