From: William Breathitt Gray <vilhelm.gray@gmail.com> To: jic23@kernel.org Cc: kernel@pengutronix.de, linux-stm32@st-md-mailman.stormreply.com, a.fatoum@pengutronix.de, kamel.bouhara@bootlin.com, gwendal@chromium.org, alexandre.belloni@bootlin.com, david@lechnology.com, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, syednwaris@gmail.com, patrick.havelange@essensium.com, fabrice.gasnier@st.com, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, o.rempel@pengutronix.de, William Breathitt Gray <vilhelm.gray@gmail.com> Subject: [PATCH v9 01/33] docs: counter: Consolidate Counter sysfs attributes documentation Date: Tue, 9 Mar 2021 22:19:14 +0900 [thread overview] Message-ID: <45c91b52199539ad2bc14990f02499ee05f7ccc9.1615293276.git.vilhelm.gray@gmail.com> (raw) In-Reply-To: <cover.1615293276.git.vilhelm.gray@gmail.com> Duplicate ABIs are not valid, so let's consolidate these sysfs attributes into the main sysfs-bus-counter documentation file. Cc: Patrick Havelange <patrick.havelange@essensium.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> --- Documentation/ABI/testing/sysfs-bus-counter | 76 ++++++++++++++++++- .../ABI/testing/sysfs-bus-counter-104-quad-8 | 61 --------------- .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ---- MAINTAINERS | 4 +- 4 files changed, 75 insertions(+), 82 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter index 566bd99fe0a5..29f54484183f 100644 --- a/Documentation/ABI/testing/sysfs-bus-counter +++ b/Documentation/ABI/testing/sysfs-bus-counter @@ -57,6 +57,7 @@ Description: What: /sys/bus/counter/devices/counterX/countY/count_mode_available What: /sys/bus/counter/devices/counterX/countY/error_noise_available What: /sys/bus/counter/devices/counterX/countY/function_available +What: /sys/bus/counter/devices/counterX/countY/prescaler_available What: /sys/bus/counter/devices/counterX/countY/signalZ_action_available KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org @@ -154,6 +155,15 @@ Description: Count Y. If possible, this should match the name of the respective channel as it appears in the device datasheet. +What: /sys/bus/counter/devices/counterX/countY/prescaler +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Configure the prescaler value associated with Count Y. + On the FlexTimer, the counter clock source passes through a + prescaler (i.e. a counter). This acts like a clock + divider. + What: /sys/bus/counter/devices/counterX/countY/preset KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org @@ -215,11 +225,45 @@ Description: Read-only attribute that indicates the total number of Signals belonging to the Counter. -What: /sys/bus/counter/devices/counterX/signalY/signal +What: /sys/bus/counter/devices/counterX/signalY/cable_fault +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Read-only attribute that indicates whether a differential + encoder cable fault (not connected or loose wires) is detected + for the respective channel of Signal Y. Valid attribute values + are boolean. Detection must first be enabled via the + corresponding cable_fault_enable attribute. + +What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Whether detection of differential encoder cable faults for the + respective channel of Signal Y is enabled. Valid attribute + values are boolean. + +What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Filter clock factor for input Signal Y. This prescaler value + affects the inputs of both quadrature pair signals. + +What: /sys/bus/counter/devices/counterX/signalY/index_polarity KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org Description: - Signal data of Signal Y represented as a string. + Active level of index input Signal Y; irrelevant in + non-synchronous load mode. + +What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Discrete set of available values for the respective Signal Y + configuration are listed in this file. What: /sys/bus/counter/devices/counterX/signalY/name KernelVersion: 5.2 @@ -228,3 +272,31 @@ Description: Read-only attribute that indicates the device-specific name of Signal Y. If possible, this should match the name of the respective signal as it appears in the device datasheet. + +What: /sys/bus/counter/devices/counterX/signalY/signal +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Signal data of Signal Y represented as a string. + +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Configure the counter associated with Signal Y for + non-synchronous or synchronous load mode. Synchronous load mode + cannot be selected in non-quadrature (Pulse-Direction) clock + mode. + + non-synchronous: + A logic low level is the active level at this index + input. The index function (as enabled via preset_enable) + is performed directly on the active level of the index + input. + + synchronous: + Intended for interfacing with encoder Index output in + quadrature clock mode. The active level is configured + via index_polarity. The index function (as enabled via + preset_enable) is performed synchronously with the + quadrature clock on the active level of the index input. diff --git a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 deleted file mode 100644 index eac32180c40d..000000000000 --- a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 +++ /dev/null @@ -1,61 +0,0 @@ -What: /sys/bus/counter/devices/counterX/signalY/cable_fault -KernelVersion: 5.7 -Contact: linux-iio@vger.kernel.org -Description: - Read-only attribute that indicates whether a differential - encoder cable fault (not connected or loose wires) is detected - for the respective channel of Signal Y. Valid attribute values - are boolean. Detection must first be enabled via the - corresponding cable_fault_enable attribute. - -What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable -KernelVersion: 5.7 -Contact: linux-iio@vger.kernel.org -Description: - Whether detection of differential encoder cable faults for the - respective channel of Signal Y is enabled. Valid attribute - values are boolean. - -What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler -KernelVersion: 5.7 -Contact: linux-iio@vger.kernel.org -Description: - Filter clock factor for input Signal Y. This prescaler value - affects the inputs of both quadrature pair signals. - -What: /sys/bus/counter/devices/counterX/signalY/index_polarity -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Active level of index input Signal Y; irrelevant in - non-synchronous load mode. - -What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Discrete set of available values for the respective Signal Y - configuration are listed in this file. - -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Configure the counter associated with Signal Y for - non-synchronous or synchronous load mode. Synchronous load mode - cannot be selected in non-quadrature (Pulse-Direction) clock - mode. - - non-synchronous: - A logic low level is the active level at this index - input. The index function (as enabled via preset_enable) - is performed directly on the active level of the index - input. - - synchronous: - Intended for interfacing with encoder Index output in - quadrature clock mode. The active level is configured - via index_polarity. The index function (as enabled via - preset_enable) is performed synchronously with the - quadrature clock on the active level of the index input. diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec deleted file mode 100644 index 7d2e7b363467..000000000000 --- a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec +++ /dev/null @@ -1,16 +0,0 @@ -What: /sys/bus/counter/devices/counterX/countY/prescaler_available -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Discrete set of available values for the respective Count Y - configuration are listed in this file. Values are delimited by - newline characters. - -What: /sys/bus/counter/devices/counterX/countY/prescaler -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Configure the prescaler value associated with Count Y. - On the FlexTimer, the counter clock source passes through a - prescaler (i.e. a counter). This acts like a clock - divider. diff --git a/MAINTAINERS b/MAINTAINERS index 9a9bf18bba00..ddabf7bb5246 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -299,7 +299,6 @@ M: William Breathitt Gray <vilhelm.gray@gmail.com> M: Syed Nayyar Waris <syednwaris@gmail.com> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 F: drivers/counter/104-quad-8.c ACCES PCI-IDIO-16 GPIO DRIVER @@ -4578,7 +4577,7 @@ COUNTER SUBSYSTEM M: William Breathitt Gray <vilhelm.gray@gmail.com> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/ABI/testing/sysfs-bus-counter* +F: Documentation/ABI/testing/sysfs-bus-counter F: Documentation/driver-api/generic-counter.rst F: drivers/counter/ F: include/linux/counter.h @@ -6960,7 +6959,6 @@ FLEXTIMER FTM-QUADDEC DRIVER M: Patrick Havelange <patrick.havelange@essensium.com> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt F: drivers/counter/ftm-quaddec.c -- 2.30.1
WARNING: multiple messages have this Message-ID (diff)
From: William Breathitt Gray <vilhelm.gray@gmail.com> To: jic23@kernel.org Cc: kernel@pengutronix.de, linux-stm32@st-md-mailman.stormreply.com, a.fatoum@pengutronix.de, kamel.bouhara@bootlin.com, gwendal@chromium.org, alexandre.belloni@bootlin.com, david@lechnology.com, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, syednwaris@gmail.com, patrick.havelange@essensium.com, fabrice.gasnier@st.com, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, o.rempel@pengutronix.de, William Breathitt Gray <vilhelm.gray@gmail.com> Subject: [PATCH v9 01/33] docs: counter: Consolidate Counter sysfs attributes documentation Date: Tue, 9 Mar 2021 22:19:14 +0900 [thread overview] Message-ID: <45c91b52199539ad2bc14990f02499ee05f7ccc9.1615293276.git.vilhelm.gray@gmail.com> (raw) In-Reply-To: <cover.1615293276.git.vilhelm.gray@gmail.com> Duplicate ABIs are not valid, so let's consolidate these sysfs attributes into the main sysfs-bus-counter documentation file. Cc: Patrick Havelange <patrick.havelange@essensium.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> --- Documentation/ABI/testing/sysfs-bus-counter | 76 ++++++++++++++++++- .../ABI/testing/sysfs-bus-counter-104-quad-8 | 61 --------------- .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ---- MAINTAINERS | 4 +- 4 files changed, 75 insertions(+), 82 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter index 566bd99fe0a5..29f54484183f 100644 --- a/Documentation/ABI/testing/sysfs-bus-counter +++ b/Documentation/ABI/testing/sysfs-bus-counter @@ -57,6 +57,7 @@ Description: What: /sys/bus/counter/devices/counterX/countY/count_mode_available What: /sys/bus/counter/devices/counterX/countY/error_noise_available What: /sys/bus/counter/devices/counterX/countY/function_available +What: /sys/bus/counter/devices/counterX/countY/prescaler_available What: /sys/bus/counter/devices/counterX/countY/signalZ_action_available KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org @@ -154,6 +155,15 @@ Description: Count Y. If possible, this should match the name of the respective channel as it appears in the device datasheet. +What: /sys/bus/counter/devices/counterX/countY/prescaler +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Configure the prescaler value associated with Count Y. + On the FlexTimer, the counter clock source passes through a + prescaler (i.e. a counter). This acts like a clock + divider. + What: /sys/bus/counter/devices/counterX/countY/preset KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org @@ -215,11 +225,45 @@ Description: Read-only attribute that indicates the total number of Signals belonging to the Counter. -What: /sys/bus/counter/devices/counterX/signalY/signal +What: /sys/bus/counter/devices/counterX/signalY/cable_fault +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Read-only attribute that indicates whether a differential + encoder cable fault (not connected or loose wires) is detected + for the respective channel of Signal Y. Valid attribute values + are boolean. Detection must first be enabled via the + corresponding cable_fault_enable attribute. + +What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Whether detection of differential encoder cable faults for the + respective channel of Signal Y is enabled. Valid attribute + values are boolean. + +What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Filter clock factor for input Signal Y. This prescaler value + affects the inputs of both quadrature pair signals. + +What: /sys/bus/counter/devices/counterX/signalY/index_polarity KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org Description: - Signal data of Signal Y represented as a string. + Active level of index input Signal Y; irrelevant in + non-synchronous load mode. + +What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Discrete set of available values for the respective Signal Y + configuration are listed in this file. What: /sys/bus/counter/devices/counterX/signalY/name KernelVersion: 5.2 @@ -228,3 +272,31 @@ Description: Read-only attribute that indicates the device-specific name of Signal Y. If possible, this should match the name of the respective signal as it appears in the device datasheet. + +What: /sys/bus/counter/devices/counterX/signalY/signal +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Signal data of Signal Y represented as a string. + +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode +KernelVersion: 5.2 +Contact: linux-iio@vger.kernel.org +Description: + Configure the counter associated with Signal Y for + non-synchronous or synchronous load mode. Synchronous load mode + cannot be selected in non-quadrature (Pulse-Direction) clock + mode. + + non-synchronous: + A logic low level is the active level at this index + input. The index function (as enabled via preset_enable) + is performed directly on the active level of the index + input. + + synchronous: + Intended for interfacing with encoder Index output in + quadrature clock mode. The active level is configured + via index_polarity. The index function (as enabled via + preset_enable) is performed synchronously with the + quadrature clock on the active level of the index input. diff --git a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 deleted file mode 100644 index eac32180c40d..000000000000 --- a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 +++ /dev/null @@ -1,61 +0,0 @@ -What: /sys/bus/counter/devices/counterX/signalY/cable_fault -KernelVersion: 5.7 -Contact: linux-iio@vger.kernel.org -Description: - Read-only attribute that indicates whether a differential - encoder cable fault (not connected or loose wires) is detected - for the respective channel of Signal Y. Valid attribute values - are boolean. Detection must first be enabled via the - corresponding cable_fault_enable attribute. - -What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable -KernelVersion: 5.7 -Contact: linux-iio@vger.kernel.org -Description: - Whether detection of differential encoder cable faults for the - respective channel of Signal Y is enabled. Valid attribute - values are boolean. - -What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler -KernelVersion: 5.7 -Contact: linux-iio@vger.kernel.org -Description: - Filter clock factor for input Signal Y. This prescaler value - affects the inputs of both quadrature pair signals. - -What: /sys/bus/counter/devices/counterX/signalY/index_polarity -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Active level of index input Signal Y; irrelevant in - non-synchronous load mode. - -What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Discrete set of available values for the respective Signal Y - configuration are listed in this file. - -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Configure the counter associated with Signal Y for - non-synchronous or synchronous load mode. Synchronous load mode - cannot be selected in non-quadrature (Pulse-Direction) clock - mode. - - non-synchronous: - A logic low level is the active level at this index - input. The index function (as enabled via preset_enable) - is performed directly on the active level of the index - input. - - synchronous: - Intended for interfacing with encoder Index output in - quadrature clock mode. The active level is configured - via index_polarity. The index function (as enabled via - preset_enable) is performed synchronously with the - quadrature clock on the active level of the index input. diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec deleted file mode 100644 index 7d2e7b363467..000000000000 --- a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec +++ /dev/null @@ -1,16 +0,0 @@ -What: /sys/bus/counter/devices/counterX/countY/prescaler_available -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Discrete set of available values for the respective Count Y - configuration are listed in this file. Values are delimited by - newline characters. - -What: /sys/bus/counter/devices/counterX/countY/prescaler -KernelVersion: 5.2 -Contact: linux-iio@vger.kernel.org -Description: - Configure the prescaler value associated with Count Y. - On the FlexTimer, the counter clock source passes through a - prescaler (i.e. a counter). This acts like a clock - divider. diff --git a/MAINTAINERS b/MAINTAINERS index 9a9bf18bba00..ddabf7bb5246 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -299,7 +299,6 @@ M: William Breathitt Gray <vilhelm.gray@gmail.com> M: Syed Nayyar Waris <syednwaris@gmail.com> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 F: drivers/counter/104-quad-8.c ACCES PCI-IDIO-16 GPIO DRIVER @@ -4578,7 +4577,7 @@ COUNTER SUBSYSTEM M: William Breathitt Gray <vilhelm.gray@gmail.com> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/ABI/testing/sysfs-bus-counter* +F: Documentation/ABI/testing/sysfs-bus-counter F: Documentation/driver-api/generic-counter.rst F: drivers/counter/ F: include/linux/counter.h @@ -6960,7 +6959,6 @@ FLEXTIMER FTM-QUADDEC DRIVER M: Patrick Havelange <patrick.havelange@essensium.com> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt F: drivers/counter/ftm-quaddec.c -- 2.30.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-09 13:20 UTC|newest] Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-09 13:19 [PATCH v9 00/33] Introduce the Counter character device interface William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray [this message] 2021-03-09 13:19 ` [PATCH v9 01/33] docs: counter: Consolidate Counter sysfs attributes documentation William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 02/33] docs: counter: Fix spelling William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 03/33] counter: 104-quad-8: Remove pointless comment William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 04/33] counter: 104-quad-8: Return error when invalid mode during ceiling_write William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 05/33] counter: 104-quad-8: Annotate hardware config module parameter William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 06/33] counter: 104-quad-8: Add const qualifiers for quad8_preset_register_set William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 07/33] counter: 104-quad-8: Add const qualifier for functions_list array William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 08/33] counter: interrupt-cnt: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 09/33] counter: microchip-tcb-capture: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 10/33] counter: stm32-lptimer-cnt: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 11/33] counter: stm32-timer-cnt: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 12/33] counter: 104-quad-8: Add const qualifier for actions_list array William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 13/33] counter: ftm-quaddec: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 14/33] counter: interrupt-cnt: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 15/33] counter: microchip-tcb-capture: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 16/33] counter: stm32-lptimer-cnt: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 17/33] counter: stm32-timer-cnt: " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 18/33] counter: Return error code on invalid modes William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 19/33] counter: Standardize to ERANGE for limit exceeded errors William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 20/33] counter: Rename counter_signal_value to counter_signal_level William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 21/33] counter: Rename counter_count_function to counter_function William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 22/33] counter: Internalize sysfs interface code William Breathitt Gray 2021-03-12 15:02 ` [Linux-stm32] " Fabrice Gasnier 2021-03-14 7:56 ` William Breathitt Gray 2021-03-14 7:56 ` William Breathitt Gray 2021-03-14 9:08 ` William Breathitt Gray 2021-03-14 9:08 ` William Breathitt Gray 2021-03-18 9:21 ` Fabrice Gasnier 2021-03-18 9:21 ` Fabrice Gasnier 2021-03-18 10:10 ` Fabrice Gasnier 2021-03-18 10:10 ` Fabrice Gasnier 2021-03-18 14:22 ` William Breathitt Gray 2021-03-18 14:22 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 23/33] counter: Update counter.h comments to reflect sysfs internalization William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 24/33] docs: counter: Update " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 25/33] counter: Move counter enums to uapi header William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 26/33] counter: Add character device interface William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 27/33] docs: counter: Document " William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 28/33] tools/counter: Create Counter tools William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 29/33] counter: Implement signalZ_action_component_id sysfs attribute William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 30/33] counter: Implement *_component_id sysfs attributes William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 31/33] counter: Implement events_queue_size sysfs attribute William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 32/33] counter: 104-quad-8: Replace mutex with spinlock William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray 2021-03-09 13:19 ` [PATCH v9 33/33] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8 William Breathitt Gray 2021-03-09 13:19 ` William Breathitt Gray
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=45c91b52199539ad2bc14990f02499ee05f7ccc9.1615293276.git.vilhelm.gray@gmail.com \ --to=vilhelm.gray@gmail.com \ --cc=a.fatoum@pengutronix.de \ --cc=alexandre.belloni@bootlin.com \ --cc=alexandre.torgue@st.com \ --cc=david@lechnology.com \ --cc=fabrice.gasnier@st.com \ --cc=gwendal@chromium.org \ --cc=jic23@kernel.org \ --cc=kamel.bouhara@bootlin.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-iio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=o.rempel@pengutronix.de \ --cc=patrick.havelange@essensium.com \ --cc=syednwaris@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.