All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: nbd@nbd.name
Cc: linux-wireless@vger.kernel.org, lorenzo.bianconi@redhat.com,
	luca.trombin@gmail.com, stf_xl@wp.pl
Subject: [PATCH 5.13] mt76: mt76x0e: fix device hang during suspend/resume
Date: Fri,  7 May 2021 18:50:19 +0200	[thread overview]
Message-ID: <4812f9611624b34053c1592fd9c175b67d4ffcb4.1620406022.git.lorenzo@kernel.org> (raw)

Similar to usb device, re-initialize mt76x0e device after resume in order
to fix mt7630e hang during suspend/resume

Reported-by: Luca Trombin <luca.trombin@gmail.com>
Fixes: c2a4d9fbabfb9 ("mt76x0: inital split between pci and usb")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt76x0/pci.c   | 81 ++++++++++++++++++-
 1 file changed, 77 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
index 5847f943e8da..b795e7245c07 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
@@ -87,7 +87,7 @@ static const struct ieee80211_ops mt76x0e_ops = {
 	.reconfig_complete = mt76x02_reconfig_complete,
 };
 
-static int mt76x0e_register_device(struct mt76x02_dev *dev)
+static int mt76x0e_init_hardware(struct mt76x02_dev *dev, bool resume)
 {
 	int err;
 
@@ -100,9 +100,11 @@ static int mt76x0e_register_device(struct mt76x02_dev *dev)
 	if (err < 0)
 		return err;
 
-	err = mt76x02_dma_init(dev);
-	if (err < 0)
-		return err;
+	if (!resume) {
+		err = mt76x02_dma_init(dev);
+		if (err < 0)
+			return err;
+	}
 
 	err = mt76x0_init_hardware(dev);
 	if (err < 0)
@@ -123,6 +125,17 @@ static int mt76x0e_register_device(struct mt76x02_dev *dev)
 	mt76_clear(dev, 0x110, BIT(9));
 	mt76_set(dev, MT_MAX_LEN_CFG, BIT(13));
 
+	return 0;
+}
+
+static int mt76x0e_register_device(struct mt76x02_dev *dev)
+{
+	int err;
+
+	err = mt76x0e_init_hardware(dev, false);
+	if (err < 0)
+		return err;
+
 	err = mt76x0_register_device(dev);
 	if (err < 0)
 		return err;
@@ -167,6 +180,8 @@ mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (ret)
 		return ret;
 
+	mt76_pci_disable_aspm(pdev);
+
 	mdev = mt76_alloc_device(&pdev->dev, sizeof(*dev), &mt76x0e_ops,
 				 &drv_ops);
 	if (!mdev)
@@ -220,6 +235,60 @@ mt76x0e_remove(struct pci_dev *pdev)
 	mt76_free_device(mdev);
 }
 
+#ifdef CONFIG_PM
+static int mt76x0e_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct mt76_dev *mdev = pci_get_drvdata(pdev);
+	struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
+	int i;
+
+	mt76_worker_disable(&mdev->tx_worker);
+	for (i = 0; i < ARRAY_SIZE(mdev->phy.q_tx); i++)
+		mt76_queue_tx_cleanup(dev, mdev->phy.q_tx[i], true);
+	for (i = 0; i < ARRAY_SIZE(mdev->q_mcu); i++)
+		mt76_queue_tx_cleanup(dev, mdev->q_mcu[i], true);
+	napi_disable(&mdev->tx_napi);
+
+	mt76_for_each_q_rx(mdev, i)
+		napi_disable(&mdev->napi[i]);
+
+	mt76x02_dma_disable(dev);
+	mt76x02_mcu_cleanup(dev);
+	mt76x0_chip_onoff(dev, false, false);
+
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), true);
+	pci_save_state(pdev);
+
+	return pci_set_power_state(pdev, pci_choose_state(pdev, state));
+}
+
+static int mt76x0e_resume(struct pci_dev *pdev)
+{
+	struct mt76_dev *mdev = pci_get_drvdata(pdev);
+	struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
+	int err, i;
+
+	err = pci_set_power_state(pdev, PCI_D0);
+	if (err)
+		return err;
+
+	pci_restore_state(pdev);
+
+	mt76_worker_enable(&mdev->tx_worker);
+
+	mt76_for_each_q_rx(mdev, i) {
+		mt76_queue_rx_reset(dev, i);
+		napi_enable(&mdev->napi[i]);
+		napi_schedule(&mdev->napi[i]);
+	}
+
+	napi_enable(&mdev->tx_napi);
+	napi_schedule(&mdev->tx_napi);
+
+	return mt76x0e_init_hardware(dev, true);
+}
+#endif /* CONFIG_PM */
+
 static const struct pci_device_id mt76x0e_device_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7610) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7630) },
@@ -237,6 +306,10 @@ static struct pci_driver mt76x0e_driver = {
 	.id_table	= mt76x0e_device_table,
 	.probe		= mt76x0e_probe,
 	.remove		= mt76x0e_remove,
+#ifdef CONFIG_PM
+	.suspend	= mt76x0e_suspend,
+	.resume		= mt76x0e_resume,
+#endif /* CONFIG_PM */
 };
 
 module_pci_driver(mt76x0e_driver);
-- 
2.30.2


             reply	other threads:[~2021-05-07 16:50 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-07 16:50 Lorenzo Bianconi [this message]
2021-05-15 11:47 ` [PATCH 5.13] mt76: mt76x0e: fix device hang during suspend/resume Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4812f9611624b34053c1592fd9c175b67d4ffcb4.1620406022.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=luca.trombin@gmail.com \
    --cc=nbd@nbd.name \
    --cc=stf_xl@wp.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.