From: Simon Horman <horms+renesas@verge.net.au> To: linux-renesas-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Magnus Damm <magnus.damm@gmail.com>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, Simon Horman <horms+renesas@verge.net.au> Subject: [PATCH 09/11] arm64: dts: renesas: r8a7796: add usb3_phy node Date: Fri, 22 Dec 2017 11:29:20 +0100 [thread overview] Message-ID: <488153d9fb3aa3d5b2e3acac34191917b83dbcd9.1513936761.git.horms+renesas@verge.net.au> (raw) In-Reply-To: <cover.1513936760.git.horms+renesas@verge.net.au> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> This patch adds USB3.0 PHY node for r8a7796. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index a339047acdc7..c5192d513d7d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1403,6 +1403,19 @@ status = "disabled"; }; + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7796-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a7796", "renesas,rcar-gen3-xhci"; @@ -2021,4 +2034,17 @@ }; }; }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 09/11] arm64: dts: renesas: r8a7796: add usb3_phy node Date: Fri, 22 Dec 2017 11:29:20 +0100 [thread overview] Message-ID: <488153d9fb3aa3d5b2e3acac34191917b83dbcd9.1513936761.git.horms+renesas@verge.net.au> (raw) In-Reply-To: <cover.1513936760.git.horms+renesas@verge.net.au> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> This patch adds USB3.0 PHY node for r8a7796. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index a339047acdc7..c5192d513d7d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1403,6 +1403,19 @@ status = "disabled"; }; + usb3_phy0: usb-phy at e65ee000 { + compatible = "renesas,r8a7796-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + xhci0: usb at ee000000 { compatible = "renesas,xhci-r8a7796", "renesas,rcar-gen3-xhci"; @@ -2021,4 +2034,17 @@ }; }; }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; -- 2.11.0
next prev parent reply other threads:[~2017-12-22 10:29 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 01/11] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 02/11] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 03/11] arm64: dts: renesas: ulcb: " Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 04/11] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 05/11] arm64: dts: renesas: r8a7796: " Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 06/11] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 07/11] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 08/11] arm64: dts: renesas: r8a7795: add usb3_phy node Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` Simon Horman [this message] 2017-12-22 10:29 ` [PATCH 09/11] arm64: dts: renesas: r8a7796: " Simon Horman 2017-12-22 10:29 ` [PATCH 10/11] arm64: dts: renesas: salvator-common: enable usb3_phy0 node Simon Horman 2017-12-22 10:29 ` Simon Horman 2017-12-22 10:29 ` [PATCH 11/11] arm64: dts: renesas: salvator-common: enable usb3_peri0 Simon Horman 2017-12-22 10:29 ` Simon Horman 2018-01-05 6:39 ` [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Olof Johansson 2018-01-05 6:39 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=488153d9fb3aa3d5b2e3acac34191917b83dbcd9.1513936761.git.horms+renesas@verge.net.au \ --to=horms+renesas@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=yoshihiro.shimoda.uh@renesas.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.