All of lore.kernel.org
 help / color / mirror / Atom feed
From: qu.huang@linux.dev
To: alexander.deucher@amd.com
Cc: christian.koenig@amd.com, Xinhui.Pan@amd.com, airlied@gmail.com,
	daniel@ffwll.ch, sumit.semwal@linaro.org,
	srinivasan.shanmugam@amd.com, Hawking.Zhang@amd.com,
	Harish.Kasiviswanathan@amd.com, amd-gfx@lists.freedesktop.org,
	Praful.Swarnakar@amd.com, le.ma@amd.com,
	victorchengchi.lu@amd.com, tom.stdenis@amd.com,
	suhui@nfschina.com, dan.carpenter@linaro.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	linux-media@vger.kernel.org, linaro-mm-sig@lists.linaro.org,
	qu.huang@linux.dev
Subject: [PATCH] drm/amdgpu: Fix a null pointer access when the smc_rreg  pointer is NULL
Date: Mon, 23 Oct 2023 12:56:37 +0000	[thread overview]
Message-ID: <4a687c592b0f1b04f4bbf684129f5ce02b2b6f7b@linux.dev> (raw)

In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log:

1. Navigate to the directory: /sys/kernel/debug/dri/0
2. Execute command: cat amdgpu_regs_smc
3. Exception Log::
[4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000
[4005007.702562] #PF: supervisor instruction fetch in kernel mode
[4005007.702567] #PF: error_code(0x0010) - not-present page
[4005007.702570] PGD 0 P4D 0
[4005007.702576] Oops: 0010 [#1] SMP NOPTI
[4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G           OE     5.15.0-43-generic #46-Ubunt       u
[4005007.702590] RIP: 0010:0x0
[4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.702622] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.702626] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0
[4005007.702633] Call Trace:
[4005007.702636]  <TASK>
[4005007.702640]  amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu]
[4005007.703002]  full_proxy_read+0x5c/0x80
[4005007.703011]  vfs_read+0x9f/0x1a0
[4005007.703019]  ksys_read+0x67/0xe0
[4005007.703023]  __x64_sys_read+0x19/0x20
[4005007.703028]  do_syscall_64+0x5c/0xc0
[4005007.703034]  ? do_user_addr_fault+0x1e3/0x670
[4005007.703040]  ? exit_to_user_mode_prepare+0x37/0xb0
[4005007.703047]  ? irqentry_exit_to_user_mode+0x9/0x20
[4005007.703052]  ? irqentry_exit+0x19/0x30
[4005007.703057]  ? exc_page_fault+0x89/0x160
[4005007.703062]  ? asm_exc_page_fault+0x8/0x30
[4005007.703068]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[4005007.703075] RIP: 0033:0x7f5e07672992
[4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f        1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e       c 28 48 89 54 24
[4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992
[4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003
[4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010
[4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000
[4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[4005007.703105]  </TASK>
[4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_       iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t       tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm       i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo       mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v       2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core        drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca
[4005007.703184] CR2: 0000000000000000
[4005007.703188] ---[ end trace ac65a538d240da39 ]---
[4005007.800865] RIP: 0010:0x0
[4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.800891] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.800895] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0

Signed-off-by: Qu Huang <qu.huang@linux.dev>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
index a4faea4..05405da 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
@@ -748,6 +748,9 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf,
 	ssize_t result = 0;
 	int r;

+	if (!adev->smc_rreg)
+		return -EPERM;
+
 	if (size & 0x3 || *pos & 0x3)
 		return -EINVAL;

@@ -804,6 +807,9 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user *
 	ssize_t result = 0;
 	int r;

+	if (!adev->smc_wreg)
+		return -EPERM;
+
 	if (size & 0x3 || *pos & 0x3)
 		return -EINVAL;

--
1.8.3.1

WARNING: multiple messages have this Message-ID (diff)
From: qu.huang@linux.dev
To: alexander.deucher@amd.com
Cc: tom.stdenis@amd.com, Praful.Swarnakar@amd.com,
	srinivasan.shanmugam@amd.com, suhui@nfschina.com,
	qu.huang@linux.dev, Xinhui.Pan@amd.com,
	Harish.Kasiviswanathan@amd.com, linux-kernel@vger.kernel.org,
	amd-gfx@lists.freedesktop.org, sumit.semwal@linaro.org,
	linaro-mm-sig@lists.linaro.org, le.ma@amd.com,
	linux-media@vger.kernel.org, dri-devel@lists.freedesktop.org,
	victorchengchi.lu@amd.com, christian.koenig@amd.com,
	dan.carpenter@linaro.org, Hawking.Zhang@amd.com
Subject: [PATCH] drm/amdgpu: Fix a null pointer access when the smc_rreg  pointer is NULL
Date: Mon, 23 Oct 2023 12:56:37 +0000	[thread overview]
Message-ID: <4a687c592b0f1b04f4bbf684129f5ce02b2b6f7b@linux.dev> (raw)

In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log:

1. Navigate to the directory: /sys/kernel/debug/dri/0
2. Execute command: cat amdgpu_regs_smc
3. Exception Log::
[4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000
[4005007.702562] #PF: supervisor instruction fetch in kernel mode
[4005007.702567] #PF: error_code(0x0010) - not-present page
[4005007.702570] PGD 0 P4D 0
[4005007.702576] Oops: 0010 [#1] SMP NOPTI
[4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G           OE     5.15.0-43-generic #46-Ubunt       u
[4005007.702590] RIP: 0010:0x0
[4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.702622] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.702626] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0
[4005007.702633] Call Trace:
[4005007.702636]  <TASK>
[4005007.702640]  amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu]
[4005007.703002]  full_proxy_read+0x5c/0x80
[4005007.703011]  vfs_read+0x9f/0x1a0
[4005007.703019]  ksys_read+0x67/0xe0
[4005007.703023]  __x64_sys_read+0x19/0x20
[4005007.703028]  do_syscall_64+0x5c/0xc0
[4005007.703034]  ? do_user_addr_fault+0x1e3/0x670
[4005007.703040]  ? exit_to_user_mode_prepare+0x37/0xb0
[4005007.703047]  ? irqentry_exit_to_user_mode+0x9/0x20
[4005007.703052]  ? irqentry_exit+0x19/0x30
[4005007.703057]  ? exc_page_fault+0x89/0x160
[4005007.703062]  ? asm_exc_page_fault+0x8/0x30
[4005007.703068]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[4005007.703075] RIP: 0033:0x7f5e07672992
[4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f        1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e       c 28 48 89 54 24
[4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992
[4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003
[4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010
[4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000
[4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[4005007.703105]  </TASK>
[4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_       iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t       tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm       i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo       mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v       2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core        drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca
[4005007.703184] CR2: 0000000000000000
[4005007.703188] ---[ end trace ac65a538d240da39 ]---
[4005007.800865] RIP: 0010:0x0
[4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.800891] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.800895] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0

Signed-off-by: Qu Huang <qu.huang@linux.dev>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
index a4faea4..05405da 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
@@ -748,6 +748,9 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf,
 	ssize_t result = 0;
 	int r;

+	if (!adev->smc_rreg)
+		return -EPERM;
+
 	if (size & 0x3 || *pos & 0x3)
 		return -EINVAL;

@@ -804,6 +807,9 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user *
 	ssize_t result = 0;
 	int r;

+	if (!adev->smc_wreg)
+		return -EPERM;
+
 	if (size & 0x3 || *pos & 0x3)
 		return -EINVAL;

--
1.8.3.1

WARNING: multiple messages have this Message-ID (diff)
From: qu.huang@linux.dev
To: alexander.deucher@amd.com
Cc: tom.stdenis@amd.com, Praful.Swarnakar@amd.com,
	srinivasan.shanmugam@amd.com, suhui@nfschina.com,
	qu.huang@linux.dev, Xinhui.Pan@amd.com,
	Harish.Kasiviswanathan@amd.com, linux-kernel@vger.kernel.org,
	amd-gfx@lists.freedesktop.org, sumit.semwal@linaro.org,
	linaro-mm-sig@lists.linaro.org, le.ma@amd.com,
	linux-media@vger.kernel.org, dri-devel@lists.freedesktop.org,
	daniel@ffwll.ch, victorchengchi.lu@amd.com, airlied@gmail.com,
	christian.koenig@amd.com, dan.carpenter@linaro.org,
	Hawking.Zhang@amd.com
Subject: [PATCH] drm/amdgpu: Fix a null pointer access when the smc_rreg  pointer is NULL
Date: Mon, 23 Oct 2023 12:56:37 +0000	[thread overview]
Message-ID: <4a687c592b0f1b04f4bbf684129f5ce02b2b6f7b@linux.dev> (raw)

In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log:

1. Navigate to the directory: /sys/kernel/debug/dri/0
2. Execute command: cat amdgpu_regs_smc
3. Exception Log::
[4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000
[4005007.702562] #PF: supervisor instruction fetch in kernel mode
[4005007.702567] #PF: error_code(0x0010) - not-present page
[4005007.702570] PGD 0 P4D 0
[4005007.702576] Oops: 0010 [#1] SMP NOPTI
[4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G           OE     5.15.0-43-generic #46-Ubunt       u
[4005007.702590] RIP: 0010:0x0
[4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.702622] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.702626] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0
[4005007.702633] Call Trace:
[4005007.702636]  <TASK>
[4005007.702640]  amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu]
[4005007.703002]  full_proxy_read+0x5c/0x80
[4005007.703011]  vfs_read+0x9f/0x1a0
[4005007.703019]  ksys_read+0x67/0xe0
[4005007.703023]  __x64_sys_read+0x19/0x20
[4005007.703028]  do_syscall_64+0x5c/0xc0
[4005007.703034]  ? do_user_addr_fault+0x1e3/0x670
[4005007.703040]  ? exit_to_user_mode_prepare+0x37/0xb0
[4005007.703047]  ? irqentry_exit_to_user_mode+0x9/0x20
[4005007.703052]  ? irqentry_exit+0x19/0x30
[4005007.703057]  ? exc_page_fault+0x89/0x160
[4005007.703062]  ? asm_exc_page_fault+0x8/0x30
[4005007.703068]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[4005007.703075] RIP: 0033:0x7f5e07672992
[4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f        1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e       c 28 48 89 54 24
[4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992
[4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003
[4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010
[4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000
[4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[4005007.703105]  </TASK>
[4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_       iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t       tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm       i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo       mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v       2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core        drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca
[4005007.703184] CR2: 0000000000000000
[4005007.703188] ---[ end trace ac65a538d240da39 ]---
[4005007.800865] RIP: 0010:0x0
[4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.800891] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.800895] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0

Signed-off-by: Qu Huang <qu.huang@linux.dev>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
index a4faea4..05405da 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
@@ -748,6 +748,9 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf,
 	ssize_t result = 0;
 	int r;

+	if (!adev->smc_rreg)
+		return -EPERM;
+
 	if (size & 0x3 || *pos & 0x3)
 		return -EINVAL;

@@ -804,6 +807,9 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user *
 	ssize_t result = 0;
 	int r;

+	if (!adev->smc_wreg)
+		return -EPERM;
+
 	if (size & 0x3 || *pos & 0x3)
 		return -EINVAL;

--
1.8.3.1

             reply	other threads:[~2023-10-23 13:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-23 12:56 qu.huang [this message]
2023-10-23 12:56 ` [PATCH] drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL qu.huang
2023-10-23 12:56 ` qu.huang
2023-10-23 20:27 ` Alex Deucher
2023-10-23 20:27   ` Alex Deucher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4a687c592b0f1b04f4bbf684129f5ce02b2b6f7b@linux.dev \
    --to=qu.huang@linux.dev \
    --cc=Harish.Kasiviswanathan@amd.com \
    --cc=Hawking.Zhang@amd.com \
    --cc=Praful.Swarnakar@amd.com \
    --cc=Xinhui.Pan@amd.com \
    --cc=airlied@gmail.com \
    --cc=alexander.deucher@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=christian.koenig@amd.com \
    --cc=dan.carpenter@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=le.ma@amd.com \
    --cc=linaro-mm-sig@lists.linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=srinivasan.shanmugam@amd.com \
    --cc=suhui@nfschina.com \
    --cc=sumit.semwal@linaro.org \
    --cc=tom.stdenis@amd.com \
    --cc=victorchengchi.lu@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.