From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com> To: Grant Likely <grant.likely@secretlab.ca> Cc: spi-devel-general@lists.sourceforge.net, SH-Linux <linux-sh@vger.kernel.org> Subject: [PATCH] spi: spi-rspi: fix build error for the latest shdma driver Date: Thu, 02 Aug 2012 08:17:33 +0000 [thread overview] Message-ID: <501A379D.6060009@renesas.com> (raw) Because the latest shdma driver changed, it caused build error in the spi-rspi driver. This patch fixed the build error. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/spi/spi-rspi.c | 56 +++++++++++++++++++++++++++++------------------ 1 files changed, 34 insertions(+), 22 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 4894bde..30faf6d 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -147,8 +147,6 @@ struct rspi_data { unsigned char spsr; /* for dmaengine */ - struct sh_dmae_slave dma_tx; - struct sh_dmae_slave dma_rx; struct dma_chan *chan_tx; struct dma_chan *chan_rx; int irq; @@ -663,20 +661,16 @@ static irqreturn_t rspi_irq(int irq, void *_sr) return ret; } -static bool rspi_filter(struct dma_chan *chan, void *filter_param) -{ - chan->private = filter_param; - return true; -} - -static void __devinit rspi_request_dma(struct rspi_data *rspi, - struct platform_device *pdev) +static int __devinit rspi_request_dma(struct rspi_data *rspi, + struct platform_device *pdev) { struct rspi_plat_data *rspi_pd = pdev->dev.platform_data; dma_cap_mask_t mask; + struct dma_slave_config cfg; + int ret; if (!rspi_pd) - return; + return 0; /* The driver assumes no error. */ rspi->dma_width_16bit = rspi_pd->dma_width_16bit; @@ -684,21 +678,35 @@ static void __devinit rspi_request_dma(struct rspi_data *rspi, if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_rx.slave_id = rspi_pd->dma_rx_id; - rspi->chan_rx = dma_request_channel(mask, rspi_filter, - &rspi->dma_rx); - if (rspi->chan_rx) - dev_info(&pdev->dev, "Use DMA when rx.\n"); + rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_rx_id); + if (rspi->chan_rx) { + cfg.slave_id = rspi_pd->dma_rx_id; + cfg.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(rspi->chan_rx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when rx.\n"); + else + return ret; + } } if (rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_tx.slave_id = rspi_pd->dma_tx_id; - rspi->chan_tx = dma_request_channel(mask, rspi_filter, - &rspi->dma_tx); - if (rspi->chan_tx) - dev_info(&pdev->dev, "Use DMA when tx\n"); + rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_tx_id); + if (rspi->chan_tx) { + cfg.slave_id = rspi_pd->dma_tx_id; + cfg.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(rspi->chan_tx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when tx\n"); + else + return ret; + } } + + return 0; } static void __devexit rspi_release_dma(struct rspi_data *rspi) @@ -788,7 +796,11 @@ static int __devinit rspi_probe(struct platform_device *pdev) } rspi->irq = irq; - rspi_request_dma(rspi, pdev); + ret = rspi_request_dma(rspi, pdev); + if (ret < 0) { + dev_err(&pdev->dev, "rspi_request_dma failed.\n"); + goto error4; + } ret = spi_register_master(master); if (ret < 0) { -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com> To: Grant Likely <grant.likely@secretlab.ca> Cc: spi-devel-general@lists.sourceforge.net, SH-Linux <linux-sh@vger.kernel.org> Subject: [PATCH] spi: spi-rspi: fix build error for the latest shdma driver Date: Thu, 02 Aug 2012 17:17:33 +0900 [thread overview] Message-ID: <501A379D.6060009@renesas.com> (raw) Because the latest shdma driver changed, it caused build error in the spi-rspi driver. This patch fixed the build error. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/spi/spi-rspi.c | 56 +++++++++++++++++++++++++++++------------------ 1 files changed, 34 insertions(+), 22 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 4894bde..30faf6d 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -147,8 +147,6 @@ struct rspi_data { unsigned char spsr; /* for dmaengine */ - struct sh_dmae_slave dma_tx; - struct sh_dmae_slave dma_rx; struct dma_chan *chan_tx; struct dma_chan *chan_rx; int irq; @@ -663,20 +661,16 @@ static irqreturn_t rspi_irq(int irq, void *_sr) return ret; } -static bool rspi_filter(struct dma_chan *chan, void *filter_param) -{ - chan->private = filter_param; - return true; -} - -static void __devinit rspi_request_dma(struct rspi_data *rspi, - struct platform_device *pdev) +static int __devinit rspi_request_dma(struct rspi_data *rspi, + struct platform_device *pdev) { struct rspi_plat_data *rspi_pd = pdev->dev.platform_data; dma_cap_mask_t mask; + struct dma_slave_config cfg; + int ret; if (!rspi_pd) - return; + return 0; /* The driver assumes no error. */ rspi->dma_width_16bit = rspi_pd->dma_width_16bit; @@ -684,21 +678,35 @@ static void __devinit rspi_request_dma(struct rspi_data *rspi, if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_rx.slave_id = rspi_pd->dma_rx_id; - rspi->chan_rx = dma_request_channel(mask, rspi_filter, - &rspi->dma_rx); - if (rspi->chan_rx) - dev_info(&pdev->dev, "Use DMA when rx.\n"); + rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_rx_id); + if (rspi->chan_rx) { + cfg.slave_id = rspi_pd->dma_rx_id; + cfg.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(rspi->chan_rx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when rx.\n"); + else + return ret; + } } if (rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_tx.slave_id = rspi_pd->dma_tx_id; - rspi->chan_tx = dma_request_channel(mask, rspi_filter, - &rspi->dma_tx); - if (rspi->chan_tx) - dev_info(&pdev->dev, "Use DMA when tx\n"); + rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_tx_id); + if (rspi->chan_tx) { + cfg.slave_id = rspi_pd->dma_tx_id; + cfg.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(rspi->chan_tx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when tx\n"); + else + return ret; + } } + + return 0; } static void __devexit rspi_release_dma(struct rspi_data *rspi) @@ -788,7 +796,11 @@ static int __devinit rspi_probe(struct platform_device *pdev) } rspi->irq = irq; - rspi_request_dma(rspi, pdev); + ret = rspi_request_dma(rspi, pdev); + if (ret < 0) { + dev_err(&pdev->dev, "rspi_request_dma failed.\n"); + goto error4; + } ret = spi_register_master(master); if (ret < 0) { -- 1.7.1
next reply other threads:[~2012-08-02 8:17 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-08-02 8:17 Shimoda, Yoshihiro [this message] 2012-08-02 8:17 ` [PATCH] spi: spi-rspi: fix build error for the latest shdma driver Shimoda, Yoshihiro 2012-08-27 8:28 ` Simon Horman 2012-08-27 8:28 ` Simon Horman [not found] ` <20120827082801.GB29274-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> 2012-08-27 8:56 ` Shimoda, Yoshihiro 2012-08-27 8:56 ` Shimoda, Yoshihiro 2012-10-05 11:43 ` Mark Brown 2012-10-05 11:43 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=501A379D.6060009@renesas.com \ --to=yoshihiro.shimoda.uh@renesas.com \ --cc=grant.likely@secretlab.ca \ --cc=linux-sh@vger.kernel.org \ --cc=spi-devel-general@lists.sourceforge.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.