All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alistair Francis <alistair.francis@xilinx.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, crosthwaitepeter@gmail.com,
	alistair.francis@xilinx.com
Subject: [Qemu-devel] [PATCH v7 4/6] xilinx_spips: Separate the state struct into a header
Date: Fri, 15 Jan 2016 14:38:17 -0800	[thread overview]
Message-ID: <51a3612152940983ac9cdfa189cdcbdd6f1eaf03.1452896266.git.alistair.francis@xilinx.com> (raw)
In-Reply-To: <cover.1452896266.git.alistair.francis@xilinx.com>

Separate out the XilinxSPIPS struct into a separate header
file.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
 hw/ssi/xilinx_spips.c         | 46 +++------------------------
 include/hw/ssi/xilinx_spips.h | 72 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+), 42 deletions(-)
 create mode 100644 include/hw/ssi/xilinx_spips.h

diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index e9471ff..c2a8dda 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -29,6 +29,7 @@
 #include "qemu/fifo8.h"
 #include "hw/ssi/ssi.h"
 #include "qemu/bitops.h"
+#include "hw/ssi/xilinx_spips.h"
 
 #ifndef XILINX_SPIPS_ERR_DEBUG
 #define XILINX_SPIPS_ERR_DEBUG 0
@@ -103,8 +104,6 @@
 
 #define R_MOD_ID            (0xFC / 4)
 
-#define R_MAX (R_MOD_ID+1)
-
 /* size of TXRX FIFOs */
 #define RXFF_A          32
 #define TXFF_A          32
@@ -135,30 +134,6 @@ typedef enum {
 } FlashCMD;
 
 typedef struct {
-    SysBusDevice parent_obj;
-
-    MemoryRegion iomem;
-    MemoryRegion mmlqspi;
-
-    qemu_irq irq;
-    int irqline;
-
-    uint8_t num_cs;
-    uint8_t num_busses;
-
-    uint8_t snoop_state;
-    qemu_irq *cs_lines;
-    SSIBus **spi;
-
-    Fifo8 rx_fifo;
-    Fifo8 tx_fifo;
-
-    uint8_t num_txrx_bytes;
-
-    uint32_t regs[R_MAX];
-} XilinxSPIPS;
-
-typedef struct {
     XilinxSPIPS parent_obj;
 
     uint8_t lqspi_buf[LQSPI_CACHE_SIZE];
@@ -174,19 +149,6 @@ typedef struct XilinxSPIPSClass {
     uint32_t tx_fifo_size;
 } XilinxSPIPSClass;
 
-#define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
-#define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
-
-#define XILINX_SPIPS(obj) \
-     OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_CLASS(klass) \
-     OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_GET_CLASS(obj) \
-     OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
-
-#define XILINX_QSPIPS(obj) \
-     OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
-
 static inline int num_effective_busses(XilinxSPIPS *s)
 {
     return (s->regs[R_LQSPI_CFG] & LQSPI_CFG_SEP_BUS &&
@@ -257,7 +219,7 @@ static void xilinx_spips_reset(DeviceState *d)
     XilinxSPIPS *s = XILINX_SPIPS(d);
 
     int i;
-    for (i = 0; i < R_MAX; i++) {
+    for (i = 0; i < XLNX_SPIPS_R_MAX; i++) {
         s->regs[i] = 0;
     }
 
@@ -664,7 +626,7 @@ static void xilinx_spips_realize(DeviceState *dev, Error **errp)
     }
 
     memory_region_init_io(&s->iomem, OBJECT(s), xsc->reg_ops, s,
-                          "spi", R_MAX*4);
+                          "spi", XLNX_SPIPS_R_MAX * 4);
     sysbus_init_mmio(sbd, &s->iomem);
 
     s->irqline = -1;
@@ -708,7 +670,7 @@ static const VMStateDescription vmstate_xilinx_spips = {
     .fields = (VMStateField[]) {
         VMSTATE_FIFO8(tx_fifo, XilinxSPIPS),
         VMSTATE_FIFO8(rx_fifo, XilinxSPIPS),
-        VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, R_MAX),
+        VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, XLNX_SPIPS_R_MAX),
         VMSTATE_UINT8(snoop_state, XilinxSPIPS),
         VMSTATE_END_OF_LIST()
     }
diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
new file mode 100644
index 0000000..dbb9eef
--- /dev/null
+++ b/include/hw/ssi/xilinx_spips.h
@@ -0,0 +1,72 @@
+/*
+ * Header file for the Xilinx Zynq SPI controller
+ *
+ * Copyright (C) 2015 Xilinx Inc
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef XLNX_SPIPS_H
+#define XLNX_SPIPS_H
+
+#include "hw/ssi/ssi.h"
+#include "qemu/fifo8.h"
+
+typedef struct XilinxSPIPS XilinxSPIPS;
+
+#define XLNX_SPIPS_R_MAX        (0x100 / 4)
+
+struct XilinxSPIPS {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    MemoryRegion mmlqspi;
+
+    qemu_irq irq;
+    int irqline;
+
+    uint8_t num_cs;
+    uint8_t num_busses;
+
+    uint8_t snoop_state;
+    qemu_irq *cs_lines;
+    SSIBus **spi;
+
+    Fifo8 rx_fifo;
+    Fifo8 tx_fifo;
+
+    uint8_t num_txrx_bytes;
+
+    uint32_t regs[XLNX_SPIPS_R_MAX];
+};
+
+#define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
+#define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
+
+#define XILINX_SPIPS(obj) \
+     OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
+#define XILINX_SPIPS_CLASS(klass) \
+     OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
+#define XILINX_SPIPS_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
+
+#define XILINX_QSPIPS(obj) \
+     OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
+
+#endif /* XLNX_SPIPS_H */
-- 
2.5.0

  parent reply	other threads:[~2016-01-15 22:40 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-15 22:38 [Qemu-devel] [PATCH v7 0/6] Connect the SPI devices to Xilinx's ZynqMP Alistair Francis
2016-01-15 22:38 ` [Qemu-devel] [PATCH v7 1/6] qdev: get_child_bus(): Use QOM lookup if available Alistair Francis
2016-01-15 22:47   ` Peter Crosthwaite
2016-01-16  0:00     ` Alistair Francis
2016-01-15 22:38 ` [Qemu-devel] [PATCH v7 2/6] m25p80.c: Add sst25wf080 SPI flash device Alistair Francis
2016-01-15 22:38 ` [Qemu-devel] [PATCH v7 3/6] ssi: Move ssi.h into a separate directory Alistair Francis
2016-01-15 22:38 ` Alistair Francis [this message]
2016-01-15 22:38 ` [Qemu-devel] [PATCH v7 6/6] xlnx-ep108: Connect the SPI Flash Alistair Francis
2016-01-18 11:27   ` Peter Maydell
2016-01-18 16:49     ` Alistair Francis
     [not found] ` <17c4670f77e262588befd4ff0f3bab3b89156214.1452896266.git.alistair.francis@xilinx.com>
2016-01-18 11:18   ` [Qemu-devel] [PATCH v7 5/6] xlnx-zynqmp: Connect the SPI devices Peter Maydell
2016-01-18 11:31 ` [Qemu-devel] [PATCH v7 0/6] Connect the SPI devices to Xilinx's ZynqMP Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51a3612152940983ac9cdfa189cdcbdd6f1eaf03.1452896266.git.alistair.francis@xilinx.com \
    --to=alistair.francis@xilinx.com \
    --cc=crosthwaitepeter@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.