All of lore.kernel.org
 help / color / mirror / Atom feed
From: Perry Yuan <perry.yuan@amd.com>
To: <rafael.j.wysocki@intel.com>, <Mario.Limonciello@amd.com>,
	<viresh.kumar@linaro.org>, <Ray.Huang@amd.com>,
	<gautham.shenoy@amd.com>, <Borislav.Petkov@amd.com>
Cc: <Alexander.Deucher@amd.com>, <Xinmei.Huang@amd.com>,
	<Xiaojian.Du@amd.com>, <Li.Meng@amd.com>,
	<linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 1/6] cpufreq: amd-pstate: initialize new core precision boost state
Date: Sun, 4 Feb 2024 20:12:52 +0800	[thread overview]
Message-ID: <51d8381943c3cfa7841775b02a414355f6baa20c.1707047943.git.perry.yuan@amd.com> (raw)
In-Reply-To: <cover.1707047943.git.perry.yuan@amd.com>

From: Perry Yuan <Perry.Yuan@amd.com>

Add gloal global_params to represent current CPU Performance Boost(cpb)
state for cpu frequency scaling, both active and passive modes all can
support CPU cores frequency boosting control which is based on the BIOS
setting, while BIOS turn on the "Core Performance Boost", it will
allow OS control each core highest perf limitation from OS side.

If core performance boost is disabled while a core is in a boosted P-state,
the core transitions to the highest performance non-boosted P-state,
that is the same as the nominal frequency limit.

Reported-by: Artem S. Tashkinov" <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
---
 drivers/cpufreq/amd-pstate.c | 61 +++++++++++++++++-------------------
 1 file changed, 28 insertions(+), 33 deletions(-)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 9a1e194d5cf8..921324ab9580 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -65,6 +65,19 @@ static struct cpufreq_driver amd_pstate_epp_driver;
 static int cppc_state = AMD_PSTATE_UNDEFINED;
 static bool cppc_enabled;
 
+/**
+ * struct global_params - Global parameters, mostly tunable via sysfs.
+ * @cpb_boost:		Whether or not to use boost CPU P-states.
+ * @cpb_supported:	Whether or not CPU boost P-states are available
+ *			based on the MSR_K7_HWCR bit[25] state
+ */
+struct global_params {
+	bool cpb_boost;
+	bool cpb_supported;
+};
+
+static struct global_params global;
+
 /*
  * AMD Energy Preference Performance (EPP)
  * The EPP is used in the CCLK DPM controller to drive
@@ -632,43 +645,21 @@ static int amd_get_lowest_nonlinear_freq(struct amd_cpudata *cpudata)
 	return lowest_nonlinear_freq * 1000;
 }
 
-static int amd_pstate_set_boost(struct cpufreq_policy *policy, int state)
+static int amd_pstate_boost_init(struct amd_cpudata *cpudata)
 {
-	struct amd_cpudata *cpudata = policy->driver_data;
+	u64 boost_val;
 	int ret;
 
-	if (!cpudata->boost_supported) {
-		pr_err("Boost mode is not supported by this processor or SBIOS\n");
-		return -EINVAL;
-	}
-
-	if (state)
-		policy->cpuinfo.max_freq = cpudata->max_freq;
-	else
-		policy->cpuinfo.max_freq = cpudata->nominal_freq;
-
-	policy->max = policy->cpuinfo.max_freq;
-
-	ret = freq_qos_update_request(&cpudata->req[1],
-				      policy->cpuinfo.max_freq);
-	if (ret < 0)
+	ret = rdmsrl_on_cpu(cpudata->cpu, MSR_K7_HWCR, &boost_val);
+	if (ret) {
+		pr_err_once("failed to read initial CPU boost state!\n");
 		return ret;
+	}
 
-	return 0;
-}
-
-static void amd_pstate_boost_init(struct amd_cpudata *cpudata)
-{
-	u32 highest_perf, nominal_perf;
-
-	highest_perf = READ_ONCE(cpudata->highest_perf);
-	nominal_perf = READ_ONCE(cpudata->nominal_perf);
-
-	if (highest_perf <= nominal_perf)
-		return;
+	global.cpb_supported = !((boost_val >> 25) & 0x1);
+	global.cpb_boost = global.cpb_supported;
 
-	cpudata->boost_supported = true;
-	current_pstate_driver->boost_enabled = true;
+	return ret;
 }
 
 static void amd_perf_ctl_reset(unsigned int cpu)
@@ -701,6 +692,9 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
 	if (ret)
 		goto free_cpudata1;
 
+	/* initialize cpu cores boot state */
+	amd_pstate_boost_init(cpudata);
+
 	min_freq = amd_get_min_freq(cpudata);
 	max_freq = amd_get_max_freq(cpudata);
 	nominal_freq = amd_get_nominal_freq(cpudata);
@@ -750,7 +744,6 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
 
 	policy->driver_data = cpudata;
 
-	amd_pstate_boost_init(cpudata);
 	if (!current_pstate_driver->adjust_perf)
 		current_pstate_driver->adjust_perf = amd_pstate_adjust_perf;
 
@@ -1118,6 +1111,9 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 	if (ret)
 		goto free_cpudata1;
 
+	/* initialize cpu cores boot state */
+	amd_pstate_boost_init(cpudata);
+
 	min_freq = amd_get_min_freq(cpudata);
 	max_freq = amd_get_max_freq(cpudata);
 	nominal_freq = amd_get_nominal_freq(cpudata);
@@ -1168,7 +1164,6 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 			return ret;
 		WRITE_ONCE(cpudata->cppc_cap1_cached, value);
 	}
-	amd_pstate_boost_init(cpudata);
 
 	return 0;
 
-- 
2.34.1


  reply	other threads:[~2024-02-04 12:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-04 12:12 [PATCH v2 0/6] AMD Pstate Driver Core Performance Boost Perry Yuan
2024-02-04 12:12 ` Perry Yuan [this message]
2024-02-04 12:12 ` [PATCH v2 2/6] cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost control Perry Yuan
2024-02-04 12:12 ` [PATCH v2 3/6] cpufreq: amd-pstate: fix max_perf calculation for amd_get_max_freq() Perry Yuan
2024-02-04 12:12 ` [PATCH v2 4/6] cpufreq: amd-pstate: fix the MSR highest perf will be reset issue while cpb boost off Perry Yuan
2024-02-04 12:12 ` [PATCH v2 5/6] Documentation: cpufreq: amd-pstate: introduce the new cpu boost control method Perry Yuan
2024-02-04 12:12 ` [PATCH v2 6/6] cpufreq: amd-pstate: remove legacy set_boost callback for passive mode Perry Yuan
2024-02-04 14:57   ` Oleksandr Natalenko
2024-02-05 16:28     ` Mario Limonciello

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51d8381943c3cfa7841775b02a414355f6baa20c.1707047943.git.perry.yuan@amd.com \
    --to=perry.yuan@amd.com \
    --cc=Alexander.Deucher@amd.com \
    --cc=Borislav.Petkov@amd.com \
    --cc=Li.Meng@amd.com \
    --cc=Mario.Limonciello@amd.com \
    --cc=Ray.Huang@amd.com \
    --cc=Xiaojian.Du@amd.com \
    --cc=Xinmei.Huang@amd.com \
    --cc=gautham.shenoy@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.