From: Ryder Lee <ryder.lee@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Ryder Lee <ryder.lee@mediatek.com>
Subject: [PATCH 2/4] arm: dts: mt7623: update pio, usb and crypto nodes
Date: Sun, 20 Aug 2017 17:46:00 +0800 [thread overview]
Message-ID: <51f8e8bc439dbb09dc1cd4ae0a518cc0993e6db0.1503222289.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <9c4a8be621ac76594fad303d5d49ed32bd530605.1503222289.git.ryder.lee@mediatek.com>
This patch updates pio, usb and crypto nodes to make them be
consistent with the binding documents.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 52 ++++++++++++++++++++++---------------------
1 file changed, 27 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 381843e..9ec3767 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -226,21 +226,6 @@
#reset-cells = <1>;
};
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt7623-pinctrl",
- "mediatek,mt2701-pinctrl";
- reg = <0 0x1000b000 0 0x1000>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- pins-are-numbered;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gic>;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- };
-
syscfg_pctl_a: syscfg@10005000 {
compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
@@ -274,6 +259,20 @@
clock-names = "system-clk", "rtc-clk";
};
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt7623-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -680,7 +679,7 @@
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
status = "disabled";
@@ -690,8 +689,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -699,12 +696,16 @@
u2port0: usb-phy@1a1c4800 {
reg = <0 0x1a1c4800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy@1a1c4900 {
reg = <0 0x1a1c4900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -719,7 +720,7 @@
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
status = "disabled";
@@ -729,8 +730,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -738,12 +737,16 @@
u2port1: usb-phy@1a244800 {
reg = <0 0x1a244800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port1: usb-phy@1a244900 {
reg = <0 0x1a244900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -784,16 +787,15 @@
};
crypto: crypto@1b240000 {
- compatible = "mediatek,mt7623-crypto";
+ compatible = "mediatek,eip97-crypto";
reg = <0 0x1b240000 0 0x20000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <ðsys CLK_ETHSYS_CRYPTO>;
- clock-names = "ethif","cryp";
+ clocks = <ðsys CLK_ETHSYS_CRYPTO>;
+ clock-names = "cryp";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Ryder Lee <ryder.lee@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Ryder Lee <ryder.lee@mediatek.com>
Subject: [PATCH 2/4] arm: dts: mt7623: update pio, usb and crypto nodes
Date: Sun, 20 Aug 2017 17:46:00 +0800 [thread overview]
Message-ID: <51f8e8bc439dbb09dc1cd4ae0a518cc0993e6db0.1503222289.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <9c4a8be621ac76594fad303d5d49ed32bd530605.1503222289.git.ryder.lee@mediatek.com>
This patch updates pio, usb and crypto nodes to make them be
consistent with the binding documents.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 52 ++++++++++++++++++++++---------------------
1 file changed, 27 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 381843e..9ec3767 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -226,21 +226,6 @@
#reset-cells = <1>;
};
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt7623-pinctrl",
- "mediatek,mt2701-pinctrl";
- reg = <0 0x1000b000 0 0x1000>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- pins-are-numbered;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gic>;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- };
-
syscfg_pctl_a: syscfg@10005000 {
compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
@@ -274,6 +259,20 @@
clock-names = "system-clk", "rtc-clk";
};
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt7623-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -680,7 +679,7 @@
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
status = "disabled";
@@ -690,8 +689,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -699,12 +696,16 @@
u2port0: usb-phy@1a1c4800 {
reg = <0 0x1a1c4800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy@1a1c4900 {
reg = <0 0x1a1c4900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -719,7 +720,7 @@
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
status = "disabled";
@@ -729,8 +730,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -738,12 +737,16 @@
u2port1: usb-phy@1a244800 {
reg = <0 0x1a244800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port1: usb-phy@1a244900 {
reg = <0 0x1a244900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -784,16 +787,15 @@
};
crypto: crypto@1b240000 {
- compatible = "mediatek,mt7623-crypto";
+ compatible = "mediatek,eip97-crypto";
reg = <0 0x1b240000 0 0x20000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <ðsys CLK_ETHSYS_CRYPTO>;
- clock-names = "ethif","cryp";
+ clocks = <ðsys CLK_ETHSYS_CRYPTO>;
+ clock-names = "cryp";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ryder.lee@mediatek.com (Ryder Lee)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] arm: dts: mt7623: update pio, usb and crypto nodes
Date: Sun, 20 Aug 2017 17:46:00 +0800 [thread overview]
Message-ID: <51f8e8bc439dbb09dc1cd4ae0a518cc0993e6db0.1503222289.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <9c4a8be621ac76594fad303d5d49ed32bd530605.1503222289.git.ryder.lee@mediatek.com>
This patch updates pio, usb and crypto nodes to make them be
consistent with the binding documents.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 52 ++++++++++++++++++++++---------------------
1 file changed, 27 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 381843e..9ec3767 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -226,21 +226,6 @@
#reset-cells = <1>;
};
- pio: pinctrl at 10005000 {
- compatible = "mediatek,mt7623-pinctrl",
- "mediatek,mt2701-pinctrl";
- reg = <0 0x1000b000 0 0x1000>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- pins-are-numbered;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gic>;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- };
-
syscfg_pctl_a: syscfg at 10005000 {
compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
@@ -274,6 +259,20 @@
clock-names = "system-clk", "rtc-clk";
};
+ pio: pinctrl at 1000b000 {
+ compatible = "mediatek,mt7623-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pwrap: pwrap at 1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -680,7 +679,7 @@
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
status = "disabled";
@@ -690,8 +689,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -699,12 +696,16 @@
u2port0: usb-phy at 1a1c4800 {
reg = <0 0x1a1c4800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy at 1a1c4900 {
reg = <0 0x1a1c4900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -719,7 +720,7 @@
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
status = "disabled";
@@ -729,8 +730,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -738,12 +737,16 @@
u2port1: usb-phy at 1a244800 {
reg = <0 0x1a244800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port1: usb-phy at 1a244900 {
reg = <0 0x1a244900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -784,16 +787,15 @@
};
crypto: crypto at 1b240000 {
- compatible = "mediatek,mt7623-crypto";
+ compatible = "mediatek,eip97-crypto";
reg = <0 0x1b240000 0 0x20000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <ðsys CLK_ETHSYS_CRYPTO>;
- clock-names = "ethif","cryp";
+ clocks = <ðsys CLK_ETHSYS_CRYPTO>;
+ clock-names = "cryp";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
--
1.9.1
next prev parent reply other threads:[~2017-08-20 9:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-20 9:45 [PATCH 1/4] arm: dts: mediatek: update audio node for mt2701 and mt7623 Ryder Lee
2017-08-20 9:45 ` Ryder Lee
2017-08-20 9:45 ` Ryder Lee
2017-08-20 9:46 ` Ryder Lee [this message]
2017-08-20 9:46 ` [PATCH 2/4] arm: dts: mt7623: update pio, usb and crypto nodes Ryder Lee
2017-08-20 9:46 ` Ryder Lee
2017-08-20 9:46 ` [PATCH 3/4] arm: dts: mt7623: add display related nodes Ryder Lee
2017-08-20 9:46 ` Ryder Lee
2017-08-20 9:46 ` Ryder Lee
2017-08-31 7:12 ` Linus Walleij
2017-08-31 7:12 ` Linus Walleij
2017-08-31 7:12 ` Linus Walleij
2017-08-20 9:46 ` [PATCH 4/4] arm: dts: mt7623: add PCIe " Ryder Lee
2017-08-20 9:46 ` Ryder Lee
2017-08-20 9:46 ` Ryder Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51f8e8bc439dbb09dc1cd4ae0a518cc0993e6db0.1503222289.git.ryder.lee@mediatek.com \
--to=ryder.lee@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.