All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Pfaff <tpfaff@pcs.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: <linux-kernel@vger.kernel.org>, <linux-rt-users@vger.kernel.org>,
	Marc Zyngier <maz@kernel.org>
Subject: [PATCH v3] irq/core: synchronize irq_thread startup
Date: Mon, 2 May 2022 13:28:29 +0200	[thread overview]
Message-ID: <552fe7b4-9224-b183-bb87-a8f36d335690@pcs.com> (raw)

From: Thomas Pfaff <tpfaff@pcs.com>

While running
"while /bin/true; do setserial /dev/ttyS0 uart none;
setserial /dev/ttyS0 uart 16550A; done"
on a kernel with threaded irqs, setserial is hung after some calls.

setserial opens the device, this will install an irq handler if the uart is
not none, followed by TIOCGSERIAL and TIOCSSERIAL ioctls.
Then the device is closed. On close, synchronize_irq() is called by
serial_core.

If the close comes too fast, the irq_thread does not really start,
it is terminated immediately without going into irq_thread().
But an interrupt might already been handled by
irq_default_primary_handler(), going to __irq_wake_thread() and
incrementing threads_active.
If this happens, synchronize_irq() will hang forever, because the
irq_thread is already dead, and threads_active will never be decremented.

The fix is to make sure that the irq_thread is really started
during __setup_irq().

Signed-off-by: Thomas Pfaff <tpfaff@pcs.com>
---
v2-v3:
  - initialize wait_for_threads waitqueue early
  - be more precise about flag and function names
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 99cbdf55a8bd..f09c60393e55 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -29,12 +29,14 @@ extern struct irqaction chained_action;
  * IRQTF_WARNED    - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
  * IRQTF_AFFINITY  - irq thread is requested to adjust affinity
  * IRQTF_FORCED_THREAD  - irq action is force threaded
+ * IRQTF_READY     - signals that irq thread is ready
  */
 enum {
 	IRQTF_RUNTHREAD,
 	IRQTF_WARNED,
 	IRQTF_AFFINITY,
 	IRQTF_FORCED_THREAD,
+	IRQTF_READY,
 };
 
 /*
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 939d21cd55c3..02f3b5bf5145 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -407,6 +407,7 @@ static struct irq_desc *alloc_desc(int irq, int node, unsigned int flags,
 	lockdep_set_class(&desc->lock, &irq_desc_lock_class);
 	mutex_init(&desc->request_mutex);
 	init_rcu_head(&desc->rcu);
+	init_waitqueue_head(&desc->wait_for_threads);
 
 	desc_set_defaults(irq, desc, node, affinity, owner);
 	irqd_set(&desc->irq_data, flags);
@@ -575,6 +576,7 @@ int __init early_irq_init(void)
 		raw_spin_lock_init(&desc[i].lock);
 		lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
 		mutex_init(&desc[i].request_mutex);
+		init_waitqueue_head(&desc->wait_for_threads);
 		desc_set_defaults(i, &desc[i], node, NULL, NULL);
 	}
 	return arch_early_irq_init();
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index f1d5a94c6c9f..4dca48506d38 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1263,6 +1263,31 @@ static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
 	raw_spin_unlock_irq(&desc->lock);
 }
 
+/*
+ * Internal function to notify that irq_thread is ready
+ */
+static void irq_thread_set_ready(struct irq_desc *desc,
+				 struct irqaction *action)
+{
+	set_bit(IRQTF_READY, &action->thread_flags);
+	wake_up(&desc->wait_for_threads);
+}
+
+/*
+ * Internal function to wake up irq_thread
+ * and wait until it is ready
+ */
+static void wake_up_and_wait_for_irq_thread_ready(struct irq_desc *desc,
+						  struct irqaction *action)
+{
+	if (!action || !action->thread)
+		return;
+
+	wake_up_process(action->thread);
+	wait_event(desc->wait_for_threads,
+		   test_bit(IRQTF_READY, &action->thread_flags));
+}
+
 /*
  * Interrupt handler thread
  */
@@ -1287,6 +1312,8 @@ static int irq_thread(void *data)
 
 	irq_thread_check_affinity(desc, action);
 
+	irq_thread_set_ready(desc, action);
+
 	while (!irq_wait_for_interrupt(action)) {
 		irqreturn_t action_ret;
 
@@ -1698,8 +1725,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 	}
 
 	if (!shared) {
-		init_waitqueue_head(&desc->wait_for_threads);
-
 		/* Setup the type (level, edge polarity) if configured: */
 		if (new->flags & IRQF_TRIGGER_MASK) {
 			ret = __irq_set_trigger(desc,
@@ -1795,14 +1820,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 
 	irq_setup_timings(desc, new);
 
-	/*
-	 * Strictly no need to wake it up, but hung_task complains
-	 * when no hard interrupt wakes the thread up.
-	 */
-	if (new->thread)
-		wake_up_process(new->thread);
-	if (new->secondary)
-		wake_up_process(new->secondary->thread);
+	wake_up_and_wait_for_irq_thread_ready(desc, new);
+	wake_up_and_wait_for_irq_thread_ready(desc, new->secondary);
 
 	register_irq_proc(irq, desc);
 	new->dir = NULL;



             reply	other threads:[~2022-05-02 11:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-02 11:28 Thomas Pfaff [this message]
2022-05-02 11:48 ` [PATCH v3] irq/core: synchronize irq_thread startup Marc Zyngier
2022-05-02 14:28 ` Thomas Gleixner
2022-05-02 15:34   ` Thomas Pfaff
2022-05-02 19:00     ` Thomas Gleixner
2022-05-10  8:43   ` Thomas Pfaff
2022-05-10 11:34     ` Thomas Gleixner
2022-05-10 11:37       ` Thomas Gleixner
2022-05-10 12:58         ` Thomas Pfaff
2022-05-02 19:21 ` [tip: irq/urgent] genirq: Synchronize interrupt thread startup tip-bot2 for Thomas Pfaff
     [not found] ` <20220502160106.4587-1-hdanton@sina.com>
2022-05-02 19:24   ` [PATCH v3] irq/core: synchronize irq_thread startup Thomas Gleixner
     [not found]   ` <20220503004209.4670-1-hdanton@sina.com>
2022-05-03  7:38     ` Thomas Gleixner
2022-05-05 10:01 ` [tip: irq/urgent] genirq: Synchronize interrupt thread startup tip-bot2 for Thomas Pfaff

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=552fe7b4-9224-b183-bb87-a8f36d335690@pcs.com \
    --to=tpfaff@pcs.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.