All of lore.kernel.org
 help / color / mirror / Atom feed
From: <marcelo.schmitt@analog.com>
To: <beniamin.bia@analog.com>, <paul.cercueil@analog.com>,
	<Michael.Hennerich@analog.com>, <lars@metafoo.de>,
	<jic23@kernel.org>, <marcelo.schmitt1@gmail.com>
Cc: Marcelo Schmitt <marcelo.schmitt@analog.com>,
	<linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 5/7] dt-bindings: iio: Add binding documentation for AD7091R-8
Date: Tue, 21 Nov 2023 18:36:04 -0300	[thread overview]
Message-ID: <566503a54feba35178c778a7929bced66ebd8870.1700595310.git.marcelo.schmitt1@gmail.com> (raw)
In-Reply-To: <cover.1700595310.git.marcelo.schmitt1@gmail.com>

From: Marcelo Schmitt <marcelo.schmitt@analog.com>

Add device tree binding documentation for AD7091R-8.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
---
 .../bindings/iio/adc/adi,ad7091r8.yaml        | 101 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
new file mode 100644
index 000000000000..f10b6727737f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r8.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7091R8 8-Channel 12-Bit ADC
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+  Analog Devices AD7091R-8 8-Channel 12-Bit ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091r2
+      - adi,ad7091r4
+      - adi,ad7091r8
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+  spi-max-frequency: true
+
+  adi,conversion-start-gpios:
+    description:
+      Device tree identifier of the CONVST pin.
+      This logic input is used to initiate conversions on the analog
+      input channels.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - adi,conversion-start-gpios
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: "adc.yaml"
+    type: object
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+    required:
+      - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # AD7091R-2 does not have ALERT/BUSY/GPO pin
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r4
+              - adi,ad7091r8
+    then:
+      properties:
+        interrupts: true
+    else:
+      properties:
+        interrupts: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+                compatible = "adi,ad7091r8";
+                reg = <0x0>;
+                spi-max-frequency = <45454545>;
+                vref-supply = <&adc_vref>;
+                adi,conversion-start-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+                reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+                interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+                interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 008f0e73bead..6e7c6c866396 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1132,6 +1132,7 @@ L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
 F:	drivers/iio/adc/drivers/iio/adc/ad7091r-base.c
 F:	drivers/iio/adc/drivers/iio/adc/ad7091r-base.h
 F:	drivers/iio/adc/drivers/iio/adc/ad7091r5.c
-- 
2.42.0


  parent reply	other threads:[~2023-11-21 21:36 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-21 21:33 [PATCH 0/7] Add support for AD7091R-2/-4/-8 marcelo.schmitt
2023-11-21 21:34 ` [PATCH 1/7] iio: adc: ad7091r-base: Set alert config and drvdata marcelo.schmitt
2023-11-21 21:35 ` [PATCH 2/7] MAINTAINERS: Add MAINTAINERS entry for AD7091R marcelo.schmitt
2023-11-21 21:35 ` [PATCH 3/7] iio: adc: ad7091r: Move defines to header file marcelo.schmitt
2023-11-22 12:40   ` kernel test robot
2023-11-21 21:35 ` [PATCH 4/7] iio: adc: ad7091r: Alloc IIO device before generic probe marcelo.schmitt
2023-11-21 21:36 ` marcelo.schmitt [this message]
2023-11-22  9:57   ` [PATCH 5/7] dt-bindings: iio: Add binding documentation for AD7091R-8 Krzysztof Kozlowski
2023-11-22 12:40   ` kernel test robot
2023-11-21 21:36 ` [PATCH 6/7] iio: adc: Add support " marcelo.schmitt
2023-11-22 10:01   ` Krzysztof Kozlowski
2023-11-23  6:30   ` Dan Carpenter
2023-11-21 21:36 ` [PATCH 7/7] iio: adc: ad7091r-base: Add debugfs reg access marcelo.schmitt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=566503a54feba35178c778a7929bced66ebd8870.1700595310.git.marcelo.schmitt1@gmail.com \
    --to=marcelo.schmitt@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=beniamin.bia@analog.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcelo.schmitt1@gmail.com \
    --cc=paul.cercueil@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.