All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michel Dänzer" <michel@daenzer.net>
To: Julian Margetson <runaway@candw.ms>
Cc: Alex Deucher <alexander.deucher@amd.com>,
	Maling list - DRI developers <dri-devel@lists.freedesktop.org>
Subject: Re: [Powerpc] Sam460ex Canyonlands issue -Kernel 4.4.6-rc1
Date: Thu, 31 Mar 2016 15:50:41 +0900	[thread overview]
Message-ID: <56FCC8C1.7030706@daenzer.net> (raw)
In-Reply-To: <56FBAC12.7080303@candw.ms>

[-- Attachment #1: Type: text/plain, Size: 2091 bytes --]

On 30.03.2016 19:36, Julian Margetson wrote:
> On 3/29/2016 11:49 PM, Michel Dänzer wrote:
>> On 29.03.2016 18:55, Julian Margetson wrote:
>>> On 3/28/2016 11:15 PM, Michel Dänzer wrote:
>>>> On 29.03.2016 08:47, Julian Margetson wrote:
>>>>> Seeing the following when booting kernel 4.6-rc1 on Acube Sam460ex
>>>>> Canyonlands board.
>>>>> This loops for a few times then the kernel boots.
>>>>> No problem with the 4.6-rc1 with an A-eon Tabor Freescale e500v2
>>>>> board.
>>>>>
>>>>> Regards
>>>>>
>>>>> Julian
>>>>>
>>>>>
>>>>>    [    2.197839] ------------[ cut here ]------------
>>>>>    [    2.197850] WARNING: CPU: 0 PID: 1 at
>>>>> drivers/gpu/drm/drm_irq.c:1368 drm_vblank_off+0x2c/0x1e0
>>>> That's
>>>>
>>>>      if (WARN_ON(pipe >= dev->num_crtcs))
>>>>
>>>> My best guess is that drm_vblank_off is called before drm_vblank_init,
>>>> so dev->num_crtcs is still 0.
>>>>
>>>>
>>>> Please provide the full dmesg output corresponding to the problem.
>>>>
>>>>
>>> Attached
>> [...]
>>
>>> [drm] radeon: irq initialized.
>>> [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed
>>> (scratch(0x850C)=0xCAFEDEAD)
>>> radeon 0001:81:00.0: disabling GPU acceleration
>> Okay, so the problem is that acceleration fails to initialize, in which
>> case the driver calls drm_vblank_cleanup.
>>
>> I can see two basic options for a solution: Either don't call
>> radeon_irq_kms_fini/drm_vblank_cleanup if acceleration fails to
>> initialize, or check if acceleration is enabled before calling
>> drm_vblank_on/off. Any preferences?
>>
>>
> Thanks
> 
> No preferences .

Does the attached patch fix the problem?


> I would be interested in a fix for the acceleration problem if possible .

Beware that while the kernel side of this might be relatively easy to
fix, making the userspace radeonsi driver work on big endian hosts would
likely require substantial effort.


-- 
Earthling Michel Dänzer               |               http://www.amd.com
Libre software enthusiast             |             Mesa and X developer

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: radeon-guard-vblank-on-off.diff --]
[-- Type: text/x-patch; name="radeon-guard-vblank-on-off.diff", Size: 1958 bytes --]

diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index cf61e08..b80b08f 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -275,13 +275,15 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode)
 		if (ASIC_IS_DCE3(rdev) && !ASIC_IS_DCE6(rdev))
 			atombios_enable_crtc_memreq(crtc, ATOM_ENABLE);
 		atombios_blank_crtc(crtc, ATOM_DISABLE);
-		drm_vblank_on(dev, radeon_crtc->crtc_id);
+		if (dev->num_crtcs > radeon_crtc->crtc_id)
+			drm_vblank_on(dev, radeon_crtc->crtc_id);
 		radeon_crtc_load_lut(crtc);
 		break;
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
-		drm_vblank_off(dev, radeon_crtc->crtc_id);
+		if (dev->num_crtcs > radeon_crtc->crtc_id)
+			drm_vblank_off(dev, radeon_crtc->crtc_id);
 		if (radeon_crtc->enabled)
 			atombios_blank_crtc(crtc, ATOM_ENABLE);
 		if (ASIC_IS_DCE3(rdev) && !ASIC_IS_DCE6(rdev))
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 24152df..478d409 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -331,13 +331,15 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
 									 RADEON_CRTC_DISP_REQ_EN_B));
 			WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl));
 		}
-		drm_vblank_on(dev, radeon_crtc->crtc_id);
+		if (dev->num_crtcs > radeon_crtc->crtc_id)
+			drm_vblank_on(dev, radeon_crtc->crtc_id);
 		radeon_crtc_load_lut(crtc);
 		break;
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
-		drm_vblank_off(dev, radeon_crtc->crtc_id);
+		if (dev->num_crtcs > radeon_crtc->crtc_id)
+			drm_vblank_off(dev, radeon_crtc->crtc_id);
 		if (radeon_crtc->crtc_id)
 			WREG32_P(RADEON_CRTC2_GEN_CNTL, mask, ~(RADEON_CRTC2_EN | mask));
 		else {

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2016-03-31  6:50 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-28 23:47 [Powerpc] Sam460ex Canyonlands issue -Kernel 4.4.6-rc1 Julian Margetson
2016-03-29  3:15 ` Michel Dänzer
2016-03-29  9:55   ` Julian Margetson
2016-03-30  3:49     ` Michel Dänzer
2016-03-30 10:36       ` Julian Margetson
2016-03-31  6:50         ` Michel Dänzer [this message]
2016-03-31 10:00           ` Julian Margetson
2016-04-01  8:31             ` Michel Dänzer
2016-04-01 10:33               ` Julian Margetson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56FCC8C1.7030706@daenzer.net \
    --to=michel@daenzer.net \
    --cc=alexander.deucher@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=runaway@candw.ms \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.