All of lore.kernel.org
 help / color / mirror / Atom feed
From: matija.glavinic-pecotic.ext@nokia.com (Matija Glavinic Pecotic)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM Fix A15 798181 errata initialization
Date: Thu, 19 May 2016 19:41:28 +0200	[thread overview]
Message-ID: <573DFAC8.2070805@nokia.com> (raw)

Current errata initialization doesn't take properly revision and REVIDR
into account. Depending on the core revision, revidr bits should not be
taken into account. Errata misleadingly declares r3p3 to be error-free,
but this is not the case. Include rp3p3 in errata initialization.

Here are possible fixes defined in revidr register for r2 and r3 [1,2]:

r0p0-r2p1: No fixes applied

r2p2,r2p3:

REVIDR[4]: 798181 Moving a virtual page that is being accessed by
	   an active process can lead to unexpected behavior
REVIDR[9]: Not defined

r2p4,r3p0,r3p1,r3p2:

REVIDR[4]: 798181 Moving a virtual page that is being accessed by
	   an active process can lead to unexpected behavior
REVIDR[9]: 798181 Moving a virtual page that is being accessed by
	   an active process can lead to unexpected behavior
	   - This is an update to a previously released ECO.

r3p3:

REVIDR[4]: Reserved
REVIDR[9]: 798181 Moving a virtual page that is being accessed by
	   an active process can lead to unexpected behavior
	   - This is an update to a previously released ECO.

And here is proposed handling from the same document:

* In r3p2 and earlier versions with REVIDR[4]= 0,the full workaround is
  required.
* In r3p2 and earlier versions with REVIDR[4]=1, REVIDR[9]=0, only the
  portion of the workaround up to the end of step 6 is required.
* In r3p2 and earlier versions with REVIDR[4]=1, REVIDR[9]=1, no
  workaround is required.
* In r3p3, if REVIDR[9]=0, only the portion of the workaround up
  to the end of step 6 is required.
* In r3p3, if REVIDR[9]=1, no workaround is required.

These imply following:

REVIDR[9] set -> No WA
REVIDR[4] set, REVIDR[9] cleared -> Partial WA
Both cleared -> Full WA

Where certain bits should and should not be taken into account
depending on whether they are defined for the revision.

Although not explicitly mentioned in the errata note, REVIDR[9] set,
with REVIDR[4] cleared is valid combination which requires no WA. This
is confirmed by ARM support and errata will be updated.

[1] ARM CortexTM-A15 MPCore - NEON
    Product revision r3
    Software Developers Errata Notice
    ARM-EPM-028093 v20.0 Released

[2] ARM CortexTM-A15 MPCore - NEON
    Product Revision r2
    Software Developers Errata Notice
    ARM-EPM-028090 v19.3 Released

Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
Changes in v2: Explicitly comment versions, fixes and handling

 arch/arm/kernel/smp_tlb.c | 44 ++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 40 insertions(+), 4 deletions(-)

diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index 2e72be4..22313cb 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -93,17 +93,53 @@ void erratum_a15_798181_init(void)
 	unsigned int revidr = read_cpuid(CPUID_REVIDR);
 
 	/* Brahma-B15 r0p0..r0p2 affected
-	 * Cortex-A15 r0p0..r3p2 w/o ECO fix affected */
-	if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2)
+	 * Cortex-A15 r0p0..r3p3 w/o ECO fix affected
+	 * Fixes applied to A15 with respect to the revision and revidr are:
+	 *
+	 * r0p0-r2p1: No fixes applied
+	 * r2p2,r2p3:
+	 *	REVIDR[4]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *	REVIDR[9]: Not defined
+	 * r2p4,r3p0,r3p1,r3p2:
+	 *	REVIDR[4]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *	REVIDR[9]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *		   - This is an update to a previously released ECO.
+	 * r3p3:
+	 *	REVIDR[4]: Reserved
+	 *	REVIDR[9]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *		   - This is an update to a previously released ECO.
+	 *
+	 * Handling:
+	 *	REVIDR[9] set -> No WA
+	 *	REVIDR[4] set, REVIDR[9] cleared -> Partial WA
+	 *	Both cleared -> Full WA
+	 */
+	if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2) {
 		erratum_a15_798181_handler = erratum_a15_798181_broadcast;
-	else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr <= 0x413fc0f2 &&
-		 (revidr & 0x210) != 0x210) {
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x412fc0f2) {
+		erratum_a15_798181_handler = erratum_a15_798181_broadcast;
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x412fc0f4) {
 		if (revidr & 0x10)
 			erratum_a15_798181_handler =
 				erratum_a15_798181_partial;
 		else
 			erratum_a15_798181_handler =
 				erratum_a15_798181_broadcast;
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x413fc0f3) {
+		if ((revidr & 0x210) == 0)
+			erratum_a15_798181_handler =
+				erratum_a15_798181_broadcast;
+		else if (revidr & 0x10)
+			erratum_a15_798181_handler =
+				erratum_a15_798181_partial;
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x414fc0f0) {
+		if ((revidr & 0x200) == 0)
+			erratum_a15_798181_handler =
+				erratum_a15_798181_partial;
 	}
 }
 #endif
-- 
2.1.4

                 reply	other threads:[~2016-05-19 17:41 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=573DFAC8.2070805@nokia.com \
    --to=matija.glavinic-pecotic.ext@nokia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.