All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Nayak, Rajendra" <rnayak@ti.com>
To: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: [PATCH 08/10] OMAP3: SR: Remove redundunt defines
Date: Fri, 3 Apr 2009 21:39:18 +0530	[thread overview]
Message-ID: <5A47E75E594F054BAF48C5E4FC4B92AB02FB102C24@dbde02.ent.ti.com> (raw)

From: Rajendra Nayak <rnayak@ti.com>

This patch removes the local defines (PRCM_VDD1/2) in smartreflex
driver and uses the already existing global definitions (VDD1_OPP/VDD2_OPP)
from omap34xx.h file.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
---
 arch/arm/mach-omap2/resource34xx.c |    6 +++---
 arch/arm/mach-omap2/smartreflex.c  |    8 ++++----
 arch/arm/mach-omap2/smartreflex.h  |    3 ---
 3 files changed, 7 insertions(+), 10 deletions(-)

Index: linux-omap-pm/arch/arm/mach-omap2/resource34xx.c
===================================================================
--- linux-omap-pm.orig/arch/arm/mach-omap2/resource34xx.c
+++ linux-omap-pm/arch/arm/mach-omap2/resource34xx.c
@@ -218,7 +218,7 @@ int resource_set_opp_level(int res, u32 
 		/* Send pre notification to CPUFreq */
 		cpufreq_notify_transition(&freqs_notify, CPUFREQ_PRECHANGE);
 #endif
-		t_opp = ID_VDD(PRCM_VDD1) |
+		t_opp = ID_VDD(VDD1_OPP) |
 			ID_OPP_NO(mpu_opps[target_level].opp_id);
 		if (resp->curr_level > target_level) {
 			/* Scale Frequency and then voltage */
@@ -245,7 +245,7 @@ int resource_set_opp_level(int res, u32 
 			return 0;
 		l3_freq = get_freq(l3_opps + MAX_VDD2_OPP,
 					target_level);
-		t_opp = ID_VDD(PRCM_VDD2) |
+		t_opp = ID_VDD(VDD2_OPP) |
 			ID_OPP_NO(l3_opps[target_level].opp_id);
 		if (resp->curr_level > target_level) {
 			/* Scale Frequency and then voltage */
@@ -266,7 +266,7 @@ int resource_set_opp_level(int res, u32 
 			if (ret) {
 #ifdef CONFIG_OMAP_SMARTREFLEX
 				/* Setting clock failed, revert voltage */
-				t_opp = ID_VDD(PRCM_VDD2) |
+				t_opp = ID_VDD(VDD2_OPP) |
 					ID_OPP_NO(l3_opps[resp->curr_level].
 							opp_id);
 				sr_voltagescale_vcbypass(t_opp,
Index: linux-omap-pm/arch/arm/mach-omap2/smartreflex.c
===================================================================
--- linux-omap-pm.orig/arch/arm/mach-omap2/smartreflex.c
+++ linux-omap-pm/arch/arm/mach-omap2/smartreflex.c
@@ -676,7 +676,7 @@ int sr_voltagescale_vcbypass(u32 target_
 	vdd = get_vdd(target_opp);
 	target_opp_no = get_opp_no(target_opp);
 
-	if (vdd == PRCM_VDD1) {
+	if (vdd == VDD1_OPP) {
 		sr_status = sr_stop_vddautocomap(SR1);
 
 		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
@@ -685,7 +685,7 @@ int sr_voltagescale_vcbypass(u32 target_
 					OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
 		reg_addr = R_VDD1_SR_CONTROL;
 
-	} else if (vdd == PRCM_VDD2) {
+	} else if (vdd == VDD2_OPP) {
 		sr_status = sr_stop_vddautocomap(SR2);
 
 		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
@@ -724,9 +724,9 @@ int sr_voltagescale_vcbypass(u32 target_
 	udelay(T2_SMPS_UPDATE_DELAY);
 
 	if (sr_status) {
-		if (vdd == PRCM_VDD1)
+		if (vdd == VDD1_OPP)
 			sr_start_vddautocomap(SR1, target_opp_no);
-		else if (vdd == PRCM_VDD2)
+		else if (vdd == VDD2_OPP)
 			sr_start_vddautocomap(SR2, target_opp_no);
 	}
 
Index: linux-omap-pm/arch/arm/mach-omap2/smartreflex.h
===================================================================
--- linux-omap-pm.orig/arch/arm/mach-omap2/smartreflex.h
+++ linux-omap-pm/arch/arm/mach-omap2/smartreflex.h
@@ -171,9 +171,6 @@
 /* R_DCDC_GLOBAL_CFG register, SMARTREFLEX_ENABLE values */
 #define DCDC_GLOBAL_CFG_ENABLE_SRFLX	0x08
 
-/* VDDs*/
-#define PRCM_VDD1	1
-#define PRCM_VDD2	2
 #define PRCM_MAX_SYSC_REGS 30
 
 /*

                 reply	other threads:[~2009-04-03 16:09 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5A47E75E594F054BAF48C5E4FC4B92AB02FB102C24@dbde02.ent.ti.com \
    --to=rnayak@ti.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.