From: Markus Elfring <Markus.Elfring@web.de>
To: linuxppc-dev@lists.ozlabs.org,
Andrew Morton <akpm@linux-foundation.org>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Christophe Leroy <christophe.leroy@c-s.fr>,
Michael Ellerman <mpe@ellerman.id.au>,
Mike Rapoport <rppt@linux.ibm.com>,
Paul Mackerras <paulus@samba.org>
Cc: LKML <linux-kernel@vger.kernel.org>, kernel-janitors@vger.kernel.org
Subject: [PATCH] powerpc/setup: Adjust six seq_printf() calls in show_cpuinfo()
Date: Tue, 2 Jul 2019 14:56:46 +0200 [thread overview]
Message-ID: <5b62379e-a35f-4f56-f1b5-6350f76007e7@web.de> (raw)
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Tue, 2 Jul 2019 14:41:42 +0200
A bit of information should be put into a sequence.
Thus improve the execution speed for this data output by better usage
of corresponding functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
arch/powerpc/kernel/setup-common.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1f8db666468d..a381723b11bd 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -239,18 +239,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
maj = (pvr >> 8) & 0xFF;
min = pvr & 0xFF;
- seq_printf(m, "processor\t: %lu\n", cpu_id);
- seq_printf(m, "cpu\t\t: ");
+ seq_printf(m, "processor\t: %lu\ncpu\t\t: ", cpu_id);
if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name)
- seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+ seq_puts(m, cur_cpu_spec->cpu_name);
else
seq_printf(m, "unknown (%08x)", pvr);
if (cpu_has_feature(CPU_FTR_ALTIVEC))
- seq_printf(m, ", altivec supported");
+ seq_puts(m, ", altivec supported");
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
#ifdef CONFIG_TAU
if (cpu_has_feature(CPU_FTR_TAU)) {
@@ -332,7 +331,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "bogomips\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100);
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
/* If this is the last cpu, print the summary */
if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Markus Elfring <Markus.Elfring@web.de>
To: linuxppc-dev@lists.ozlabs.org,
Andrew Morton <akpm@linux-foundation.org>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Christophe Leroy <christophe.leroy@c-s.fr>,
Michael Ellerman <mpe@ellerman.id.au>,
Mike Rapoport <rppt@linux.ibm.com>,
Paul Mackerras <paulus@samba.org>
Cc: kernel-janitors@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] powerpc/setup: Adjust six seq_printf() calls in show_cpuinfo()
Date: Tue, 02 Jul 2019 12:56:46 +0000 [thread overview]
Message-ID: <5b62379e-a35f-4f56-f1b5-6350f76007e7@web.de> (raw)
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Tue, 2 Jul 2019 14:41:42 +0200
A bit of information should be put into a sequence.
Thus improve the execution speed for this data output by better usage
of corresponding functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
arch/powerpc/kernel/setup-common.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1f8db666468d..a381723b11bd 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -239,18 +239,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
maj = (pvr >> 8) & 0xFF;
min = pvr & 0xFF;
- seq_printf(m, "processor\t: %lu\n", cpu_id);
- seq_printf(m, "cpu\t\t: ");
+ seq_printf(m, "processor\t: %lu\ncpu\t\t: ", cpu_id);
if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name)
- seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+ seq_puts(m, cur_cpu_spec->cpu_name);
else
seq_printf(m, "unknown (%08x)", pvr);
if (cpu_has_feature(CPU_FTR_ALTIVEC))
- seq_printf(m, ", altivec supported");
+ seq_puts(m, ", altivec supported");
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
#ifdef CONFIG_TAU
if (cpu_has_feature(CPU_FTR_TAU)) {
@@ -332,7 +331,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "bogomips\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100);
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
/* If this is the last cpu, print the summary */
if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Markus Elfring <Markus.Elfring@web.de>
To: linuxppc-dev@lists.ozlabs.org,
Andrew Morton <akpm@linux-foundation.org>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Christophe Leroy <christophe.leroy@c-s.fr>,
Michael Ellerman <mpe@ellerman.id.au>,
Mike Rapoport <rppt@linux.ibm.com>,
Paul Mackerras <paulus@samba.org>
Cc: kernel-janitors@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] powerpc/setup: Adjust six seq_printf() calls in show_cpuinfo()
Date: Tue, 2 Jul 2019 14:56:46 +0200 [thread overview]
Message-ID: <5b62379e-a35f-4f56-f1b5-6350f76007e7@web.de> (raw)
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Tue, 2 Jul 2019 14:41:42 +0200
A bit of information should be put into a sequence.
Thus improve the execution speed for this data output by better usage
of corresponding functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
arch/powerpc/kernel/setup-common.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1f8db666468d..a381723b11bd 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -239,18 +239,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
maj = (pvr >> 8) & 0xFF;
min = pvr & 0xFF;
- seq_printf(m, "processor\t: %lu\n", cpu_id);
- seq_printf(m, "cpu\t\t: ");
+ seq_printf(m, "processor\t: %lu\ncpu\t\t: ", cpu_id);
if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name)
- seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+ seq_puts(m, cur_cpu_spec->cpu_name);
else
seq_printf(m, "unknown (%08x)", pvr);
if (cpu_has_feature(CPU_FTR_ALTIVEC))
- seq_printf(m, ", altivec supported");
+ seq_puts(m, ", altivec supported");
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
#ifdef CONFIG_TAU
if (cpu_has_feature(CPU_FTR_TAU)) {
@@ -332,7 +331,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "bogomips\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100);
- seq_printf(m, "\n");
+ seq_putc(m, '\n');
/* If this is the last cpu, print the summary */
if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
--
2.22.0
next reply other threads:[~2019-07-02 12:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-02 12:56 Markus Elfring [this message]
2019-07-02 12:56 ` [PATCH] powerpc/setup: Adjust six seq_printf() calls in show_cpuinfo() Markus Elfring
2019-07-02 12:56 ` Markus Elfring
2021-02-03 11:40 ` Michael Ellerman
2021-02-03 11:40 ` Michael Ellerman
2021-02-03 11:40 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5b62379e-a35f-4f56-f1b5-6350f76007e7@web.de \
--to=markus.elfring@web.de \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=christophe.leroy@c-s.fr \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=rppt@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.