From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/5] ARM: zynq: Fix leds subnode name for zc702/zybo-z7 Date: Thu, 26 Nov 2020 14:25:02 +0100 [thread overview] Message-ID: <607a66783b129294364abf09a6fc8abd241ff4ee.1606397101.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1606397101.git.michal.simek@xilinx.com> Fix the leds subnode names to match (^led-[0-9a-f]$|led). Similar change has been also done by commit 9a19a39ee48b ("arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1"). The patch is fixing these warnings: .../zynq-zc702.dt.yaml: leds: 'ds23' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml .../zynq-zybo-z7.dt.yaml: gpio-leds: 'ld4' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- arch/arm/boot/dts/zynq-zc702.dts | 2 +- arch/arm/boot/dts/zynq-zybo-z7.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 27cd6cb52f1b..10a7d0b8cf8b 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -49,7 +49,7 @@ sw13 { leds { compatible = "gpio-leds"; - ds23 { + led-ds23 { label = "ds23"; gpios = <&gpio0 10 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts index 357b78a5c11b..7b87e10d3953 100644 --- a/arch/arm/boot/dts/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -25,7 +25,7 @@ chosen { gpio-leds { compatible = "gpio-leds"; - ld4 { + led-ld4 { label = "zynq-zybo-z7:green:ld4"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/5] ARM: zynq: Fix leds subnode name for zc702/zybo-z7 Date: Thu, 26 Nov 2020 14:25:02 +0100 [thread overview] Message-ID: <607a66783b129294364abf09a6fc8abd241ff4ee.1606397101.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1606397101.git.michal.simek@xilinx.com> Fix the leds subnode names to match (^led-[0-9a-f]$|led). Similar change has been also done by commit 9a19a39ee48b ("arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1"). The patch is fixing these warnings: .../zynq-zc702.dt.yaml: leds: 'ds23' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml .../zynq-zybo-z7.dt.yaml: gpio-leds: 'ld4' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- arch/arm/boot/dts/zynq-zc702.dts | 2 +- arch/arm/boot/dts/zynq-zybo-z7.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 27cd6cb52f1b..10a7d0b8cf8b 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -49,7 +49,7 @@ sw13 { leds { compatible = "gpio-leds"; - ds23 { + led-ds23 { label = "ds23"; gpios = <&gpio0 10 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts index 357b78a5c11b..7b87e10d3953 100644 --- a/arch/arm/boot/dts/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -25,7 +25,7 @@ chosen { gpio-leds { compatible = "gpio-leds"; - ld4 { + led-ld4 { label = "zynq-zybo-z7:green:ld4"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-26 13:25 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-26 13:24 [PATCH 0/5] ARM: zynq: Update DTs based on the latest YAML checking Michal Simek 2020-11-26 13:24 ` Michal Simek 2020-11-26 13:25 ` [PATCH 1/5] ARM: zynq: Fix compatible string for adi,adxl345 chip Michal Simek 2020-11-26 13:25 ` Michal Simek 2020-11-26 13:25 ` [PATCH 2/5] ARM: zynq: Rename bus to be align with simple-bus yaml Michal Simek 2020-11-26 13:25 ` Michal Simek 2020-11-26 13:25 ` Michal Simek [this message] 2020-11-26 13:25 ` [PATCH 3/5] ARM: zynq: Fix leds subnode name for zc702/zybo-z7 Michal Simek 2020-11-26 13:25 ` [PATCH 4/5] ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 Michal Simek 2020-11-26 13:25 ` Michal Simek 2020-11-26 13:25 ` [PATCH 5/5] ARM: zynq: Convert at25 binding to new description on zc770-xm013 Michal Simek 2020-11-26 13:25 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=607a66783b129294364abf09a6fc8abd241ff4ee.1606397101.git.michal.simek@xilinx.com \ --to=michal.simek@xilinx.com \ --cc=devicetree@vger.kernel.org \ --cc=git@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=monstr@monstr.eu \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.