From: Joshua Clayton <stillcompiling@gmail.com>
To: Alan Tull <atull@opensource.altera.com>,
Moritz Fischer <moritz.fischer@ettus.com>,
Russell King <linux@armlinux.org.uk>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Anatolij Gustschin <agust@denx.de>,
Joshua Clayton <stillcompiling@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-fpga@vger.kernel.org
Subject: [PATCH v7 3/3] ARM: dts: imx6q-evi: support cyclone-ps-spi
Date: Thu, 19 Jan 2017 16:12:29 -0800 [thread overview]
Message-ID: <65e7655577c560dd4fbcebfe4094fe0974712f6c.1484869881.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1484869881.git.stillcompiling@gmail.com>
In-Reply-To: <cover.1484869881.git.stillcompiling@gmail.com>
Add support for Altera cyclone V FPGA connected to an spi port
to the evi devicetree file
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 24fe093..a0cbb2d 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -82,6 +82,15 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
status = "okay";
+
+ fpga_spi: cyclonespi@0 {
+ compatible = "altr,fpga-passive-serial";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_fpgaspi>;
+ nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ };
};
&ecspi3 {
@@ -313,6 +322,13 @@
>;
};
+ pinctrl_fpgaspi: fpgaspigrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ >;
+ };
+
pinctrl_gpminand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Joshua Clayton <stillcompiling@gmail.com>
To: Alan Tull <atull@opensource.altera.com>,
Moritz Fischer <moritz.fischer@ettus.com>,
Russell King <linux@armlinux.org.uk>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Joshua Clayton <stillcompiling@gmail.com>,
linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
Anatolij Gustschin <agust@denx.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 3/3] ARM: dts: imx6q-evi: support cyclone-ps-spi
Date: Thu, 19 Jan 2017 16:12:29 -0800 [thread overview]
Message-ID: <65e7655577c560dd4fbcebfe4094fe0974712f6c.1484869881.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1484869881.git.stillcompiling@gmail.com>
In-Reply-To: <cover.1484869881.git.stillcompiling@gmail.com>
Add support for Altera cyclone V FPGA connected to an spi port
to the evi devicetree file
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 24fe093..a0cbb2d 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -82,6 +82,15 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
status = "okay";
+
+ fpga_spi: cyclonespi@0 {
+ compatible = "altr,fpga-passive-serial";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_fpgaspi>;
+ nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ };
};
&ecspi3 {
@@ -313,6 +322,13 @@
>;
};
+ pinctrl_fpgaspi: fpgaspigrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ >;
+ };
+
pinctrl_gpminand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: stillcompiling@gmail.com (Joshua Clayton)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 3/3] ARM: dts: imx6q-evi: support cyclone-ps-spi
Date: Thu, 19 Jan 2017 16:12:29 -0800 [thread overview]
Message-ID: <65e7655577c560dd4fbcebfe4094fe0974712f6c.1484869881.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1484869881.git.stillcompiling@gmail.com>
Add support for Altera cyclone V FPGA connected to an spi port
to the evi devicetree file
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 24fe093..a0cbb2d 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -82,6 +82,15 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
status = "okay";
+
+ fpga_spi: cyclonespi at 0 {
+ compatible = "altr,fpga-passive-serial";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_fpgaspi>;
+ nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ };
};
&ecspi3 {
@@ -313,6 +322,13 @@
>;
};
+ pinctrl_fpgaspi: fpgaspigrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ >;
+ };
+
pinctrl_gpminand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
--
2.9.3
next prev parent reply other threads:[~2017-01-20 0:22 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 0:12 [PATCH v7 0/3] Altera Cyclone Passive Serial SPI FPGA Manager Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton
2017-01-20 0:12 ` [PATCH v7 1/3] doc: dt: add cyclone-ps-spi binding document Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton
2017-01-23 15:39 ` Rob Herring
2017-01-23 15:39 ` Rob Herring
2017-01-20 0:12 ` [PATCH v7 2/3] fpga manager: Add cyclone-ps-spi driver for Altera FPGAs Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton
2017-01-20 11:26 ` kbuild test robot
2017-01-20 11:26 ` kbuild test robot
2017-01-20 11:26 ` kbuild test robot
2017-01-20 12:07 ` kbuild test robot
2017-01-20 12:07 ` kbuild test robot
2017-01-20 12:07 ` kbuild test robot
2017-01-20 23:39 ` Joshua Clayton
2017-01-20 23:39 ` Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton [this message]
2017-01-20 0:12 ` [PATCH v7 3/3] ARM: dts: imx6q-evi: support cyclone-ps-spi Joshua Clayton
2017-01-20 0:12 ` Joshua Clayton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=65e7655577c560dd4fbcebfe4094fe0974712f6c.1484869881.git.stillcompiling@gmail.com \
--to=stillcompiling@gmail.com \
--cc=agust@denx.de \
--cc=atull@opensource.altera.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=moritz.fischer@ettus.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.