From: Simon Horman <horms+renesas@verge.net.au> To: linux-renesas-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Magnus Damm <magnus.damm@gmail.com>, Geert Uytterhoeven <geert+renesas@glider.be>, Simon Horman <horms+renesas@verge.net.au> Subject: [PATCH 6/8] arm64: dts: r8a7795: Rename the serial port clock to fck Date: Thu, 4 Feb 2016 15:29:43 +0100 [thread overview] Message-ID: <69e359ca8811582cf7433f3fa894a7d6cbba4905.1454595726.git.horms+renesas@verge.net.au> (raw) In-Reply-To: <cover.1454595726.git.horms+renesas@verge.net.au> From: Geert Uytterhoeven <geert+renesas@glider.be> The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 013df449fc30..ddeec7d7b6eb 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -480,7 +480,7 @@ reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -494,7 +494,7 @@ reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -508,7 +508,7 @@ reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -522,7 +522,7 @@ reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -536,7 +536,7 @@ reg = <0 0xe66b0000 0 96>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -549,7 +549,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -562,7 +562,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -575,7 +575,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -588,7 +588,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -601,7 +601,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -614,7 +614,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&cpg>; -- 2.7.0.rc3.207.g0ac5344
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/8] arm64: dts: r8a7795: Rename the serial port clock to fck Date: Thu, 4 Feb 2016 15:29:43 +0100 [thread overview] Message-ID: <69e359ca8811582cf7433f3fa894a7d6cbba4905.1454595726.git.horms+renesas@verge.net.au> (raw) In-Reply-To: <cover.1454595726.git.horms+renesas@verge.net.au> From: Geert Uytterhoeven <geert+renesas@glider.be> The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 013df449fc30..ddeec7d7b6eb 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -480,7 +480,7 @@ reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -494,7 +494,7 @@ reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -508,7 +508,7 @@ reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -522,7 +522,7 @@ reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -536,7 +536,7 @@ reg = <0 0xe66b0000 0 96>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -549,7 +549,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -562,7 +562,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -575,7 +575,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -588,7 +588,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -601,7 +601,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -614,7 +614,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&cpg>; -- 2.7.0.rc3.207.g0ac5344
next prev parent reply other threads:[~2016-02-04 14:29 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-04 14:29 [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman 2016-02-04 14:29 ` [PATCH 1/8] arm64: dts: r8a7795: Complete SYS-DMAC nodes Simon Horman 2016-02-04 14:29 ` Simon Horman 2016-02-04 14:29 ` [PATCH 2/8] arm64: dts: r8a7795: Add USB3.0 host device nodes Simon Horman 2016-02-04 14:29 ` Simon Horman 2016-02-04 14:29 ` [PATCH 3/8] arm64: dts: salvator-x: enable usb3.0 host channel 0 Simon Horman 2016-02-04 14:29 ` Simon Horman 2016-02-04 14:29 ` [PATCH 4/8] arm64: dts: r8a7795: Add USB-DMAC device nodes Simon Horman 2016-02-04 14:29 ` [PATCH 5/8] arm64: dts: r8a7795: Add SCIF fallback compatibility strings Simon Horman 2016-02-04 14:29 ` Simon Horman [this message] 2016-02-04 14:29 ` [PATCH 6/8] arm64: dts: r8a7795: Rename the serial port clock to fck Simon Horman 2016-02-04 14:29 ` [PATCH 7/8] arm64: dts: r8a7795: Add BRG support for (H)SCIF Simon Horman 2016-02-04 14:29 ` Simon Horman 2016-02-04 14:29 ` [PATCH 8/8] arm64: dts: salvator-x: Enable SCIF_CLK frequency and pins Simon Horman 2016-02-04 14:29 ` Simon Horman 2016-02-08 21:41 ` [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.6 Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=69e359ca8811582cf7433f3fa894a7d6cbba4905.1454595726.git.horms+renesas@verge.net.au \ --to=horms+renesas@verge.net.au \ --cc=geert+renesas@glider.be \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.