From: <sean.wang@mediatek.com>
To: <marcel@holtmann.org>, <johan.hedberg@gmail.com>
Cc: <linux-bluetooth@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v4 2/2] Bluetooth: mediatek: Add protocol support for MediaTek MT7663U USB devices
Date: Mon, 3 Sep 2018 22:08:24 +0800 [thread overview]
Message-ID: <6b4ba4e0dbcdcf3a40188e8b6a60228d529c31f6.1535983416.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1535983416.git.sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
This adds the support of enabling MT7663U Bluetooth function running
on the top of btusb driver.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=0e8d ProdID=7663 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btusb.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c29d12e..fd511a4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2409,6 +2409,7 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
#ifdef CONFIG_BT_HCIBTUSB_MTK
+#define FIRMWARE_MT7663 "mt7663pr2h.bin"
#define FIRMWARE_MT7668 "mt7668pr2h.bin"
#define HCI_WMT_MAX_EVENT_SIZE 64
@@ -2837,6 +2838,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
}
switch (dev_id) {
+ case 0x7663:
+ fwname = FIRMWARE_MT7663;
+ break;
case 0x7668:
fwname = FIRMWARE_MT7668;
break;
@@ -2932,6 +2936,7 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
return 0;
}
+MODULE_FIRMWARE(FIRMWARE_MT7663);
MODULE_FIRMWARE(FIRMWARE_MT7668);
#endif
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: <sean.wang@mediatek.com>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: linux-bluetooth@vger.kernel.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v4 2/2] Bluetooth: mediatek: Add protocol support for MediaTek MT7663U USB devices
Date: Mon, 3 Sep 2018 22:08:24 +0800 [thread overview]
Message-ID: <6b4ba4e0dbcdcf3a40188e8b6a60228d529c31f6.1535983416.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1535983416.git.sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
This adds the support of enabling MT7663U Bluetooth function running
on the top of btusb driver.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=0e8d ProdID=7663 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btusb.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c29d12e..fd511a4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2409,6 +2409,7 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
#ifdef CONFIG_BT_HCIBTUSB_MTK
+#define FIRMWARE_MT7663 "mt7663pr2h.bin"
#define FIRMWARE_MT7668 "mt7668pr2h.bin"
#define HCI_WMT_MAX_EVENT_SIZE 64
@@ -2837,6 +2838,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
}
switch (dev_id) {
+ case 0x7663:
+ fwname = FIRMWARE_MT7663;
+ break;
case 0x7668:
fwname = FIRMWARE_MT7668;
break;
@@ -2932,6 +2936,7 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
return 0;
}
+MODULE_FIRMWARE(FIRMWARE_MT7663);
MODULE_FIRMWARE(FIRMWARE_MT7668);
#endif
--
2.7.4
next prev parent reply other threads:[~2018-09-03 14:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-03 14:08 [PATCH v4 0/2] Bluetooth: mediatek: Add protocol support for MediaTek USB devices sean.wang
2018-09-03 14:08 ` sean.wang
2018-09-03 14:08 ` [PATCH v4 1/2] Bluetooth: mediatek: Add protocol support for MediaTek MT7668U " sean.wang
2018-09-03 14:08 ` sean.wang
2018-09-03 14:08 ` sean.wang [this message]
2018-09-03 14:08 ` [PATCH v4 2/2] Bluetooth: mediatek: Add protocol support for MediaTek MT7663U " sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b4ba4e0dbcdcf3a40188e8b6a60228d529c31f6.1535983416.git.sean.wang@mediatek.com \
--to=sean.wang@mediatek.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.